Re: [PATCH] Input: eeti_ts: Mark as CONFIG_BROKEN

From: Dmitry Torokhov
Date: Mon Jul 23 2012 - 12:51:25 EST


On Thu, Jul 19, 2012 at 05:36:12PM +0200, Daniel Mack wrote:
> On 17.07.2012 14:59, Daniel Mack wrote:
> > On 13.07.2012 09:01, Dmitry Torokhov wrote:
> >> On Wed, May 02, 2012 at 09:36:51PM -0700, Dmitry Torokhov wrote:
> >>> Hi Sven,
> >>>
> >>> On Sat, Apr 07, 2012 at 08:38:33PM +0200, Sven Neumann wrote:
> >>>> Hi,
> >>>>
> >>>> On 07.04.12 09:02, Dmitry Torokhov wrote:
> >>>>> On Fri, Apr 06, 2012 at 10:40:07PM -0700, Olof Johansson wrote:
> >>>>>> This seems to have been broken since 2010, so obviously noone actually
> >>>>>> cares about the driver:
> >>>>>>
> >>>>>> make[4]: *** [drivers/input/touchscreen/eeti_ts.o] Error 1
> >>>>>> drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active':
> >>>>>> drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]
> >>>>>>
> >>>>>> irq_to_gpio isn't available on most platforms today, so the driver
> >>>>>> will need some rework by someone who has hardware access and can test
> >>>>>> (to make sure that, for example, switching to level interrupts and just
> >>>>>> keep taking them while there's more to process works).
> >>>>>>
> >>>>>> I guess it could just be scheduled for removal, but let's start with
> >>>>>> marking it CONFIG_BROKEN.
> >>>>>
> >>>>> Well, it probably works quite well on arches that do have irq_to_gpio(),
> >>>>> let's ask Daniel and Sven if they still have this hardware and if they
> >>>>> can try the patch below that implements what you suggested.
> >>>>
> >>>> This hardware is still in use and we also still follow kernel
> >>>> development and try to update our customer devices to recent kernel
> >>>> versions regularly. Currently we are at 3.1.10 and the touchscreen
> >>>> works well with that. I'll try to update to a more recent kernel
> >>>> next week and will try your patch.
> >>>>
> >>>
> >>> Did you have a chance to test the patch?
> >>
> >> *ping*
> >>
> >> It would be nice to get driver in mainline compile [and work] again...
> >
> > We gave that patch a quick try today and it doesn't seem to work. We
> > don't get any events from the touch screen anymore. We need to debug
> > this further, hopefully by the end of this week.
> >
> > If there's anything obvious in the setup of the threaded IRQ handler,
> > please let us know. Otherwise, I'll get back once I have a fixed version
> > of the patch.
>
> Ok, finally I found some time. In general, the patch works fine. The
> only detail I had to amend was the irqflags, which were changed from
> IRQF_TRIGGER_RISING/IRQF_TRIGGER_FALLING to
> IRQF_TRIGGER_HIGH/IRQF_TRIGGER_LOW, which doesn't work as the PXA can't
> deal with level-based IRQs. Changing this back to RISING/FALLING makes
> the driver work again.

Hmm, but that would mean we need to restore reading the data in open()
to make sure we re-arm IRQ in case somebody touched the screen before it
was opened by userspace...

Thanks.

--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/