[PATCH RFT 2/2] regulator: mc13892: Convertmc13892_sw_regulator_ops to get_voltage_sel

From: Axel Lin
Date: Thu Jul 19 2012 - 03:11:41 EST


Signed-off-by: Axel Lin <axel.lin@xxxxxxxxx>
---
drivers/regulator/mc13892-regulator.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index 60195b3..662b1d5 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -399,11 +399,11 @@ static struct regulator_ops mc13892_gpo_regulator_ops = {
.get_voltage = mc13xxx_fixed_regulator_get_voltage,
};

-static int mc13892_sw_regulator_get_voltage(struct regulator_dev *rdev)
+static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
int ret, id = rdev_get_id(rdev);
- unsigned int val, hi;
+ unsigned int val;

dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);

@@ -414,17 +414,11 @@ static int mc13892_sw_regulator_get_voltage(struct regulator_dev *rdev)
if (ret)
return ret;

- hi = val & MC13892_SWITCHERS0_SWxHI;
val = (val & mc13892_regulators[id].vsel_mask)
>> mc13892_regulators[id].vsel_shift;

dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val);

- if (hi)
- val = (25000 * val) + 1100000;
- else
- val = (25000 * val) + 600000;
-
return val;
}

@@ -459,7 +453,7 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev,
static struct regulator_ops mc13892_sw_regulator_ops = {
.list_voltage = regulator_list_voltage_table,
.set_voltage_sel = mc13892_sw_regulator_set_voltage_sel,
- .get_voltage = mc13892_sw_regulator_get_voltage,
+ .get_voltage_sel = mc13892_sw_regulator_get_voltage_sel,
};

static int mc13892_vcam_set_mode(struct regulator_dev *rdev, unsigned int mode)
--
1.7.9.5



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/