[PATCH v4] USB: ehci-s5p: Add vbus setup function to the s5p ehci gluelayer

From: Vivek Gautam
Date: Tue Jul 17 2012 - 00:26:25 EST


This patch retrieves and configures the vbus control gpio via
the device tree. The suspend/resume callbacks will be later
modified for vbus control.

Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
---
drivers/usb/host/ehci-s5p.c | 21 +++++++++++++++++++++
1 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 37d84cf..9d8f1dd 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -15,6 +15,7 @@
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/of_gpio.h>
#include <plat/ehci.h>
#include <plat/usb-phy.h>

@@ -64,6 +65,24 @@ static const struct hc_driver s5p_ehci_hc_driver = {
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};

+static void s5p_setup_vbus_gpio(struct platform_device *pdev)
+{
+ int err;
+ int gpio;
+
+ if (!pdev->dev.of_node)
+ return;
+
+ gpio = of_get_named_gpio(pdev->dev.of_node,
+ "samsung,vbus-gpio", 0);
+ if (!gpio_is_valid(gpio))
+ return;
+
+ err = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "ehci_vbus_gpio");
+ if (err)
+ dev_err(&pdev->dev, "can't request ehci vbus gpio %d", gpio);
+}
+
static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);

static int __devinit s5p_ehci_probe(struct platform_device *pdev)
@@ -92,6 +111,8 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);

+ s5p_setup_vbus_gpio(pdev);
+
s5p_ehci = devm_kzalloc(&pdev->dev, sizeof(struct s5p_ehci_hcd),
GFP_KERNEL);
if (!s5p_ehci)
--
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/