[PATCH 0/2] omap: add ocp2scp as a bus driver

From: Kishon Vijay Abraham I
Date: Mon Jul 16 2012 - 10:14:38 EST

This patch series is done as a preparatory step for adding phy drivers
for dwc3 and musb.

This series adds a new driver for ocp2scp (only dt) to which phy
drivers are connected.

Since currently there is no generic way to create a child device along
with doing a pm_runtime_enable (the exact requirement for ocp2scp), I'm
creating a separate driver for ocp2scp.

Changes from [RFC PATCH v2 0/2] omap: add ocp2scp as a misc driver:
Created a new folder drivers/bus and moved ocp2scp driver from misc to

This patch was developed and tested on

Kishon Vijay Abraham I (2):
drivers: bus: add a new driver for omap-ocp2scp
arm/dts: omap4: Add ocp2scp data

.../devicetree/bindings/bus/omap-ocp2scp.txt | 10 ++
arch/arm/boot/dts/omap4.dtsi | 8 ++
drivers/Kconfig | 2 +
drivers/Makefile | 2 +
drivers/bus/Kconfig | 15 +++
drivers/bus/Makefile | 5 +
drivers/bus/omap-ocp2scp.c | 98 ++++++++++++++++++++
7 files changed, 140 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
create mode 100644 drivers/bus/Kconfig
create mode 100644 drivers/bus/Makefile
create mode 100644 drivers/bus/omap-ocp2scp.c


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/