ethernet-related thermal emergency on Thinkpad x60

[Pavel Machek]

Hi!

When using nework interface (eth0), machine starts to behave
weird. Like... complete freeze, then poweroff, then it hangs on boot
(initializing ACPI) until I let it to cool down... and I'm not even
using gigabit speed.

Did anyone see it? Any ideas? Should I attempt to open it and clean
the dust?

									Pavel

e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
coda_read_super: Bad mount data
coda_read_super: device index: 0
coda_read_super: rootfid is (01234567.ffffffff.08051c00.00000000)
coda: Unexpected interruption.
Failure of coda_cnode_make for root: error -4
thinkpad_acpi: THERMAL EMERGENCY: a sensor reports something is extremely hot!
thinkpad_acpi: temperatures (Celsius): 88 49 N/A 82 40 N/A 40 N/A 52 61 N/A N/A N/A N/A N/A N/A


-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/