Re: [ 00/48] 3.2.22-stable review
From: Ben Hutchings
Date: Sun Jul 01 2012 - 15:12:11 EST
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index 21fd05c..e1f856b 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -12,6 +12,12 @@ Rules on what kind of patches are accepted, and which ones are not, into the
marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
security issue, or some "oh, that's not good" issue. In short, something
critical.
+ - Serious issues as reported by a user of a distribution kernel may also
+ be considered if they fix a notable performance or interactivity issue.
+ As these fixes are not as obvious and have a higher risk of a subtle
+ regression they should only be submitted by a distribution kernel
+ maintainer and include an addendum linking to a bugzilla entry if it
+ exists and additional information on the user-visible impact.
- New device IDs and quirks are also accepted.
- No "theoretical race condition" issues, unless an explanation of how the
race can be exploited is also provided.
diff --git a/Makefile b/Makefile
index 7eb465e..fec37c5 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 2
-SUBLEVEL = 21
-EXTRAVERSION =
+SUBLEVEL = 22
+EXTRAVERSION = -rc1
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h
index 7d04875..c0c70a8 100644
--- a/arch/arm/plat-samsung/include/plat/map-s3c.h
+++ b/arch/arm/plat-samsung/include/plat/map-s3c.h
@@ -22,7 +22,7 @@
#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000)
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_PA_UART S3C2410_PA_UART
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index 40dbb2b..11b19ea 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
@@ -24,7 +24,7 @@ static inline void arch_wdt_reset(void)
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
- if (s3c2410_wdtclk)
+ if (!IS_ERR(s3c2410_wdtclk))
clk_enable(s3c2410_wdtclk);
/* put initial values into count and data */
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index f3444f7..0c3b775 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -175,7 +175,7 @@
#define X86_FEATURE_XSAVEOPT (7*32+ 4) /* Optimized Xsave */
#define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */
#define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */
-#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */
+#define X86_FEATURE_DTHERM (7*32+ 7) /* Digital Thermal Sensor */
/* Virtualization flags: Linux defined, word 8 */
#define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */
diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index effff47..cb00ccc 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -31,6 +31,60 @@ static inline void native_set_pte(pte_t *ptep, pte_t pte)
ptep->pte_low = pte.pte_low;
}
+#define pmd_read_atomic pmd_read_atomic
+/*
+ * pte_offset_map_lock on 32bit PAE kernels was reading the pmd_t with
+ * a "*pmdp" dereference done by gcc. Problem is, in certain places
+ * where pte_offset_map_lock is called, concurrent page faults are
+ * allowed, if the mmap_sem is hold for reading. An example is mincore
+ * vs page faults vs MADV_DONTNEED. On the page fault side
+ * pmd_populate rightfully does a set_64bit, but if we're reading the
+ * pmd_t with a "*pmdp" on the mincore side, a SMP race can happen
+ * because gcc will not read the 64bit of the pmd atomically. To fix
+ * this all places running pmd_offset_map_lock() while holding the
+ * mmap_sem in read mode, shall read the pmdp pointer using this
+ * function to know if the pmd is null nor not, and in turn to know if
+ * they can run pmd_offset_map_lock or pmd_trans_huge or other pmd
+ * operations.
+ *
+ * Without THP if the mmap_sem is hold for reading, the pmd can only
+ * transition from null to not null while pmd_read_atomic runs. So
+ * we can always return atomic pmd values with this function.
+ *
+ * With THP if the mmap_sem is hold for reading, the pmd can become
+ * trans_huge or none or point to a pte (and in turn become "stable")
+ * at any time under pmd_read_atomic. We could read it really
+ * atomically here with a atomic64_read for the THP enabled case (and
+ * it would be a whole lot simpler), but to avoid using cmpxchg8b we
+ * only return an atomic pmdval if the low part of the pmdval is later
+ * found stable (i.e. pointing to a pte). And we're returning a none
+ * pmdval if the low part of the pmd is none. In some cases the high
+ * and low part of the pmdval returned may not be consistent if THP is
+ * enabled (the low part may point to previously mapped hugepage,
+ * while the high part may point to a more recently mapped hugepage),
+ * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part
+ * of the pmd to be read atomically to decide if the pmd is unstable
+ * or not, with the only exception of when the low part of the pmd is
+ * zero in which case we return a none pmd.
+ */
+static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
+{
+ pmdval_t ret;
+ u32 *tmp = (u32 *)pmdp;
+
+ ret = (pmdval_t) (*tmp);
+ if (ret) {
+ /*
+ * If the low part is null, we must not read the high part
+ * or we can end up with a partial pmd.
+ */
+ smp_rmb();
+ ret |= ((pmdval_t)*(tmp + 1)) << 32;
+ }
+
+ return (pmd_t) { ret };
+}
+
static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
{
set_64bit((unsigned long long *)(ptep), native_pte_val(pte));
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index c7f64e6..ea6106c 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -31,7 +31,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
const struct cpuid_bit *cb;
static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
- { X86_FEATURE_DTS, CR_EAX, 0, 0x00000006, 0 },
+ { X86_FEATURE_DTHERM, CR_EAX, 0, 0x00000006, 0 },
{ X86_FEATURE_IDA, CR_EAX, 1, 0x00000006, 0 },
{ X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006, 0 },
{ X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 },
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index a43fa1a..1502c502 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -36,6 +36,7 @@
#define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
#define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
static DEFINE_MUTEX(isolated_cpus_lock);
+static DEFINE_MUTEX(round_robin_lock);
static unsigned long power_saving_mwait_eax;
@@ -107,7 +108,7 @@ static void round_robin_cpu(unsigned int tsk_index)
if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
return;
- mutex_lock(&isolated_cpus_lock);
+ mutex_lock(&round_robin_lock);
cpumask_clear(tmp);
for_each_cpu(cpu, pad_busy_cpus)
cpumask_or(tmp, tmp, topology_thread_cpumask(cpu));
@@ -116,7 +117,7 @@ static void round_robin_cpu(unsigned int tsk_index)
if (cpumask_empty(tmp))
cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus);
if (cpumask_empty(tmp)) {
- mutex_unlock(&isolated_cpus_lock);
+ mutex_unlock(&round_robin_lock);
return;
}
for_each_cpu(cpu, tmp) {
@@ -131,7 +132,7 @@ static void round_robin_cpu(unsigned int tsk_index)
tsk_in_cpu[tsk_index] = preferred_cpu;
cpumask_set_cpu(preferred_cpu, pad_busy_cpus);
cpu_weight[preferred_cpu]++;
- mutex_unlock(&isolated_cpus_lock);
+ mutex_unlock(&round_robin_lock);
set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu));
}
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index c3d2dfc..b96544a 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -869,7 +869,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
dpm_wait_for_children(dev, async);
if (async_error)
- return 0;
+ goto Complete;
pm_runtime_get_noresume(dev);
if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
@@ -878,7 +878,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
if (pm_wakeup_pending()) {
pm_runtime_put_sync(dev);
async_error = -EBUSY;
- return 0;
+ goto Complete;
}
device_lock(dev);
@@ -926,6 +926,8 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
}
device_unlock(dev);
+
+ Complete:
complete_all(&dev->power.completion);
if (error) {
diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
index 0477982..1b5675b 100644
--- a/drivers/char/hw_random/atmel-rng.c
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -34,7 +34,7 @@ static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max,
u32 *data = buf;
/* data ready? */
- if (readl(trng->base + TRNG_ODATA) & 1) {
+ if (readl(trng->base + TRNG_ISR) & 1) {
*data = readl(trng->base + TRNG_ODATA);
/*
ensure data ready is only set again AFTER the next data
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index 70ad892..b3ccefa 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1932,12 +1932,6 @@ static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val,
if (mce->bank != 8)
return NOTIFY_DONE;
-#ifdef CONFIG_SMP
- /* Only handle if it is the right mc controller */
- if (mce->socketid != pvt->i7core_dev->socket)
- return NOTIFY_DONE;
-#endif
-
smp_rmb();
if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
smp_wmb();
@@ -2234,8 +2228,6 @@ static void i7core_unregister_mci(struct i7core_dev *i7core_dev)
if (pvt->enable_scrub)
disable_sdram_scrub_setting(mci);
- atomic_notifier_chain_unregister(&x86_mce_decoder_chain, &i7_mce_dec);
-
/* Disable EDAC polling */
i7core_pci_ctl_release(pvt);
@@ -2336,8 +2328,6 @@ static int i7core_register_mci(struct i7core_dev *i7core_dev)
/* DCLK for scrub rate setting */
pvt->dclk_freq = get_dclk_freq();
- atomic_notifier_chain_register(&x86_mce_decoder_chain, &i7_mce_dec);
-
return 0;
fail0:
@@ -2481,8 +2471,10 @@ static int __init i7core_init(void)
pci_rc = pci_register_driver(&i7core_driver);
- if (pci_rc >= 0)
+ if (pci_rc >= 0) {
+ atomic_notifier_chain_register(&x86_mce_decoder_chain, &i7_mce_dec);
return 0;
+ }
i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
pci_rc);
@@ -2498,6 +2490,7 @@ static void __exit i7core_exit(void)
{
debugf2("MC: " __FILE__ ": %s()\n", __func__);
pci_unregister_driver(&i7core_driver);
+ atomic_notifier_chain_unregister(&x86_mce_decoder_chain, &i7_mce_dec);
}
module_init(i7core_init);
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 7a402bf..18a1293 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -1661,9 +1661,6 @@ static void sbridge_unregister_mci(struct sbridge_dev *sbridge_dev)
debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
__func__, mci, &sbridge_dev->pdev[0]->dev);
- atomic_notifier_chain_unregister(&x86_mce_decoder_chain,
- &sbridge_mce_dec);
-
/* Remove MC sysfs nodes */
edac_mc_del_mc(mci->dev);
@@ -1731,8 +1728,6 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev)
goto fail0;
}
- atomic_notifier_chain_register(&x86_mce_decoder_chain,
- &sbridge_mce_dec);
return 0;
fail0:
@@ -1861,8 +1856,10 @@ static int __init sbridge_init(void)
pci_rc = pci_register_driver(&sbridge_driver);
- if (pci_rc >= 0)
+ if (pci_rc >= 0) {
+ atomic_notifier_chain_register(&x86_mce_decoder_chain, &sbridge_mce_dec);
return 0;
+ }
sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
pci_rc);
@@ -1878,6 +1875,7 @@ static void __exit sbridge_exit(void)
{
debugf2("MC: " __FILE__ ": %s()\n", __func__);
pci_unregister_driver(&sbridge_driver);
+ atomic_notifier_chain_unregister(&x86_mce_decoder_chain, &sbridge_mce_dec);
}
module_init(sbridge_init);
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 3e927ce..a1ee634 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -585,7 +585,7 @@ static bool
drm_monitor_supports_rb(struct edid *edid)
{
if (edid->revision >= 4) {
- bool ret;
+ bool ret = false;
drm_for_each_detailed_block((u8 *)edid, is_rb, &ret);
return ret;
}
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 3e7c478..3e2edc6 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3312,6 +3312,10 @@ i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file)
if (ret == 0 && atomic_read(&dev_priv->mm.wedged))
ret = -EIO;
+ } else if (wait_for(i915_seqno_passed(ring->get_seqno(ring),
+ seqno) ||
+ atomic_read(&dev_priv->mm.wedged), 3000)) {
+ ret = -EBUSY;
}
}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index d3820c2..578ddfc 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -424,6 +424,30 @@ static void gen6_pm_rps_work(struct work_struct *work)
mutex_unlock(&dev_priv->dev->struct_mutex);
}
+static void gen6_queue_rps_work(struct drm_i915_private *dev_priv,
+ u32 pm_iir)
+{
+ unsigned long flags;
+
+ /*
+ * IIR bits should never already be set because IMR should
+ * prevent an interrupt from being shown in IIR. The warning
+ * displays a case where we've unsafely cleared
+ * dev_priv->pm_iir. Although missing an interrupt of the same
+ * type is not a problem, it displays a problem in the logic.
+ *
+ * The mask bit in IMR is cleared by rps_work.
+ */
+
+ spin_lock_irqsave(&dev_priv->rps_lock, flags);
+ dev_priv->pm_iir |= pm_iir;
+ I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
+ POSTING_READ(GEN6_PMIMR);
+ spin_unlock_irqrestore(&dev_priv->rps_lock, flags);
+
+ queue_work(dev_priv->wq, &dev_priv->rps_work);
+}
+
static void pch_irq_handler(struct drm_device *dev, u32 pch_iir)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -529,16 +553,8 @@ static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
pch_irq_handler(dev, pch_iir);
}
- if (pm_iir & GEN6_PM_DEFERRED_EVENTS) {
- unsigned long flags;
- spin_lock_irqsave(&dev_priv->rps_lock, flags);
- WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n");
- dev_priv->pm_iir |= pm_iir;
- I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
- POSTING_READ(GEN6_PMIMR);
- spin_unlock_irqrestore(&dev_priv->rps_lock, flags);
- queue_work(dev_priv->wq, &dev_priv->rps_work);
- }
+ if (pm_iir & GEN6_PM_DEFERRED_EVENTS)
+ gen6_queue_rps_work(dev_priv, pm_iir);
/* should clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
@@ -634,25 +650,8 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
i915_handle_rps_change(dev);
}
- if (IS_GEN6(dev) && pm_iir & GEN6_PM_DEFERRED_EVENTS) {
- /*
- * IIR bits should never already be set because IMR should
- * prevent an interrupt from being shown in IIR. The warning
- * displays a case where we've unsafely cleared
- * dev_priv->pm_iir. Although missing an interrupt of the same
- * type is not a problem, it displays a problem in the logic.
- *
- * The mask bit in IMR is cleared by rps_work.
- */
- unsigned long flags;
- spin_lock_irqsave(&dev_priv->rps_lock, flags);
- WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n");
- dev_priv->pm_iir |= pm_iir;
- I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
- POSTING_READ(GEN6_PMIMR);
- spin_unlock_irqrestore(&dev_priv->rps_lock, flags);
- queue_work(dev_priv->wq, &dev_priv->rps_work);
- }
+ if (IS_GEN6(dev) && pm_iir & GEN6_PM_DEFERRED_EVENTS)
+ gen6_queue_rps_work(dev_priv, pm_iir);
/* should clear PCH hotplug event before clear CPU irq */
I915_WRITE(SDEIIR, pch_iir);
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index a1eb83d..f38d196 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -739,8 +739,11 @@ static void i915_restore_display(struct drm_device *dev)
if (HAS_PCH_SPLIT(dev)) {
I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL);
I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2);
- I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
+ /* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2;
+ * otherwise we get blank eDP screen after S3 on some machines
+ */
I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2);
+ I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5c1cdb8..6aa7716 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2187,6 +2187,33 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
}
static int
+intel_finish_fb(struct drm_framebuffer *old_fb)
+{
+ struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
+ struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+ bool was_interruptible = dev_priv->mm.interruptible;
+ int ret;
+
+ wait_event(dev_priv->pending_flip_queue,
+ atomic_read(&dev_priv->mm.wedged) ||
+ atomic_read(&obj->pending_flip) == 0);
+
+ /* Big Hammer, we also need to ensure that any pending
+ * MI_WAIT_FOR_EVENT inside a user batch buffer on the
+ * current scanout is retired before unpinning the old
+ * framebuffer.
+ *
+ * This should only fail upon a hung GPU, in which case we
+ * can safely continue.
+ */
+ dev_priv->mm.interruptible = false;
+ ret = i915_gem_object_finish_gpu(obj);
+ dev_priv->mm.interruptible = was_interruptible;
+
+ return ret;
+}
+
+static int
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
@@ -2224,25 +2251,8 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
return ret;
}
- if (old_fb) {
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
-
- wait_event(dev_priv->pending_flip_queue,
- atomic_read(&dev_priv->mm.wedged) ||
- atomic_read(&obj->pending_flip) == 0);
-
- /* Big Hammer, we also need to ensure that any pending
- * MI_WAIT_FOR_EVENT inside a user batch buffer on the
- * current scanout is retired before unpinning the old
- * framebuffer.
- *
- * This should only fail upon a hung GPU, in which case we
- * can safely continue.
- */
- ret = i915_gem_object_finish_gpu(obj);
- (void) ret;
- }
+ if (old_fb)
+ intel_finish_fb(old_fb);
ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
LEAVE_ATOMIC_MODE_SET);
@@ -3312,6 +3322,23 @@ static void intel_crtc_disable(struct drm_crtc *crtc)
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
struct drm_device *dev = crtc->dev;
+ /* Flush any pending WAITs before we disable the pipe. Note that
+ * we need to drop the struct_mutex in order to acquire it again
+ * during the lowlevel dpms routines around a couple of the
+ * operations. It does not look trivial nor desirable to move
+ * that locking higher. So instead we leave a window for the
+ * submission of further commands on the fb before we can actually
+ * disable it. This race with userspace exists anyway, and we can
+ * only rely on the pipe being disabled by userspace after it
+ * receives the hotplug notification and has flushed any pending
+ * batches.
+ */
+ if (crtc->fb) {
+ mutex_lock(&dev->struct_mutex);
+ intel_finish_fb(crtc->fb);
+ mutex_unlock(&dev->struct_mutex);
+ }
+
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
if (crtc->fb) {
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 933e66b..f6613dc 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -306,7 +306,7 @@ static int init_ring_common(struct intel_ring_buffer *ring)
I915_WRITE_CTL(ring,
((ring->size - PAGE_SIZE) & RING_NR_PAGES)
- | RING_REPORT_64K | RING_VALID);
+ | RING_VALID);
/* If the head is still not zero, the ring is dead */
if ((I915_READ_CTL(ring) & RING_VALID) == 0 ||
@@ -1157,18 +1157,6 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n)
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long end;
- u32 head;
-
- /* If the reported head position has wrapped or hasn't advanced,
- * fallback to the slow and accurate path.
- */
- head = intel_read_status_page(ring, 4);
- if (head > ring->head) {
- ring->head = head;
- ring->space = ring_space(ring);
- if (ring->space >= n)
- return 0;
- }
trace_i915_ring_wait_begin(ring);
end = jiffies + 3 * HZ;
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 3a4cc32..cc0801d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -499,7 +499,7 @@ int nouveau_fbcon_init(struct drm_device *dev)
nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
ret = drm_fb_helper_init(dev, &nfbdev->helper,
- nv_two_heads(dev) ? 2 : 1, 4);
+ dev->mode_config.num_crtc, 4);
if (ret) {
kfree(nfbdev);
return ret;
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 4c07436..d99aa84 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -215,7 +215,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
int i;
if (send_command(cmd) || send_argument(key)) {
- pr_warn("%s: read arg fail\n", key);
+ pr_warn("%.4s: read arg fail\n", key);
return -EIO;
}
@@ -223,7 +223,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
for (i = 0; i < len; i++) {
if (__wait_status(0x05)) {
- pr_warn("%s: read data fail\n", key);
+ pr_warn("%.4s: read data fail\n", key);
return -EIO;
}
buffer[i] = inb(APPLESMC_DATA_PORT);
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 427468f..0790c98 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -660,7 +660,7 @@ static void __cpuinit get_core_online(unsigned int cpu)
* sensors. We check this bit only, all the early CPUs
* without thermal sensors will be filtered out.
*/
- if (!cpu_has(c, X86_FEATURE_DTS))
+ if (!cpu_has(c, X86_FEATURE_DTHERM))
return;
if (!pdev) {
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index da2f021..532a902 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -288,8 +288,10 @@ static void __cell_release(struct cell *cell, struct bio_list *inmates)
hlist_del(&cell->list);
- bio_list_add(inmates, cell->holder);
- bio_list_merge(inmates, &cell->bios);
+ if (inmates) {
+ bio_list_add(inmates, cell->holder);
+ bio_list_merge(inmates, &cell->bios);
+ }
mempool_free(cell, prison->cell_pool);
}
@@ -312,9 +314,10 @@ static void cell_release(struct cell *cell, struct bio_list *bios)
*/
static void __cell_release_singleton(struct cell *cell, struct bio *bio)
{
- hlist_del(&cell->list);
BUG_ON(cell->holder != bio);
BUG_ON(!bio_list_empty(&cell->bios));
+
+ __cell_release(cell, NULL);
}
static void cell_release_singleton(struct cell *cell, struct bio *bio)
diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index b7d1e3e..fb68805 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -544,6 +544,8 @@ static const struct usb_device_id smsusb_id_table[] __devinitconst = {
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xc0a0),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+ { USB_DEVICE(0x2040, 0xf5a0),
+ .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ } /* Terminating entry */
};
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 2ca10df..981501f 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1697,7 +1697,7 @@ static int vidioc_streamoff(struct file *file, void *priv,
enum v4l2_buf_type buf_type)
{
struct gspca_dev *gspca_dev = priv;
- int ret;
+ int i, ret;
if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
@@ -1728,6 +1728,8 @@ static int vidioc_streamoff(struct file *file, void *priv,
wake_up_interruptible(&gspca_dev->wq);
/* empty the transfer queues */
+ for (i = 0; i < gspca_dev->nframes; i++)
+ gspca_dev->frame[i].v4l2_buf.flags &= ~BUF_ALL_FLAGS;
atomic_set(&gspca_dev->fr_q, 0);
atomic_set(&gspca_dev->fr_i, 0);
gspca_dev->fr_o = 0;
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 8dc84d6..86cd532 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -590,8 +590,8 @@ static void c_can_chip_config(struct net_device *dev)
priv->write_reg(priv, &priv->regs->control,
CONTROL_ENABLE_AR);
- if (priv->can.ctrlmode & (CAN_CTRLMODE_LISTENONLY &
- CAN_CTRLMODE_LOOPBACK)) {
+ if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
+ (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
/* loopback + silent mode : useful for hot self-test */
priv->write_reg(priv, &priv->regs->control, CONTROL_EIE |
CONTROL_SIE | CONTROL_IE | CONTROL_TEST);
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index e023379..e59d006 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -933,12 +933,12 @@ static int __devinit flexcan_probe(struct platform_device *pdev)
u32 clock_freq = 0;
if (pdev->dev.of_node) {
- const u32 *clock_freq_p;
+ const __be32 *clock_freq_p;
clock_freq_p = of_get_property(pdev->dev.of_node,
"clock-frequency", NULL);
if (clock_freq_p)
- clock_freq = *clock_freq_p;
+ clock_freq = be32_to_cpup(clock_freq_p);
}
if (!clock_freq) {
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index a3e65fd..e556fc3 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -2080,8 +2080,9 @@ const struct e1000_info e1000_82574_info = {
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
| FLAG_HAS_CTRLEXT_ON_LOAD,
- .flags2 = FLAG2_CHECK_PHY_HANG
+ .flags2 = FLAG2_CHECK_PHY_HANG
| FLAG2_DISABLE_ASPM_L0S
+ | FLAG2_DISABLE_ASPM_L1
| FLAG2_NO_DISABLE_RX,
.pba = 32,
.max_hw_frame_size = DEFAULT_JUMBO,
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 4e933d1..64d3f98 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5132,14 +5132,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
return -EINVAL;
}
- /* 82573 Errata 17 */
- if (((adapter->hw.mac.type == e1000_82573) ||
- (adapter->hw.mac.type == e1000_82574)) &&
- (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) {
- adapter->flags2 |= FLAG2_DISABLE_ASPM_L1;
- e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1);
- }
-
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
usleep_range(1000, 2000);
/* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8b0c2ca..6973620 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -718,13 +718,25 @@ static void ath9k_hw_init_qos(struct ath_hw *ah)
u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah)
{
+ struct ath_common *common = ath9k_hw_common(ah);
+ int i = 0;
+
REG_CLR_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
udelay(100);
REG_SET_BIT(ah, PLL3, PLL3_DO_MEAS_MASK);
- while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0)
+ while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0) {
+
udelay(100);
+ if (WARN_ON_ONCE(i >= 100)) {
+ ath_err(common, "PLL4 meaurement not done\n");
+ break;
+ }
+
+ i++;
+ }
+
return (REG_READ(ah, PLL3) & SQSUM_DVC_MASK) >> 3;
}
EXPORT_SYMBOL(ar9003_get_pll_sqsum_dvc);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index f76a814..95437fc 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1042,6 +1042,15 @@ void ath_hw_pll_work(struct work_struct *work)
hw_pll_work.work);
u32 pll_sqsum;
+ /*
+ * ensure that the PLL WAR is executed only
+ * after the STA is associated (or) if the
+ * beaconing had started in interfaces that
+ * uses beacons.
+ */
+ if (!(sc->sc_flags & SC_OP_BEACONS))
+ return;
+
if (AR_SREV_9485(sc->sc_ah)) {
ath9k_ps_wakeup(sc);
@@ -1486,15 +1495,6 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
}
}
- if ((ah->opmode == NL80211_IFTYPE_ADHOC) ||
- ((vif->type == NL80211_IFTYPE_ADHOC) &&
- sc->nvifs > 0)) {
- ath_err(common, "Cannot create ADHOC interface when other"
- " interfaces already exist.\n");
- ret = -EINVAL;
- goto out;
- }
-
ath_dbg(common, ATH_DBG_CONFIG,
"Attach a VIF of type: %d\n", vif->type);
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 76fd277..c59c592 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -936,13 +936,13 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf,
}
/* legacy rates */
+ rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
if ((tx_info->band == IEEE80211_BAND_2GHZ) &&
!(rate->flags & IEEE80211_RATE_ERP_G))
phy = WLAN_RC_PHY_CCK;
else
phy = WLAN_RC_PHY_OFDM;
- rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
info->rates[i].Rate = rate->hw_value;
if (rate->hw_value_short) {
if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index 5815cf5..4661a64 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -1777,6 +1777,7 @@ static ssize_t iwl_dbgfs_rx_queue_read(struct file *file,
return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
}
+#ifdef CONFIG_IWLWIFI_DEBUG
static ssize_t iwl_dbgfs_log_event_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
@@ -1814,6 +1815,7 @@ static ssize_t iwl_dbgfs_log_event_write(struct file *file,
return count;
}
+#endif
static ssize_t iwl_dbgfs_interrupt_read(struct file *file,
char __user *user_buf,
@@ -1941,7 +1943,9 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file,
return ret;
}
+#ifdef CONFIG_IWLWIFI_DEBUG
DEBUGFS_READ_WRITE_FILE_OPS(log_event);
+#endif
DEBUGFS_READ_WRITE_FILE_OPS(interrupt);
DEBUGFS_READ_FILE_OPS(fh_reg);
DEBUGFS_READ_FILE_OPS(rx_queue);
@@ -1957,7 +1961,9 @@ static int iwl_trans_pcie_dbgfs_register(struct iwl_trans *trans,
{
DEBUGFS_ADD_FILE(rx_queue, dir, S_IRUSR);
DEBUGFS_ADD_FILE(tx_queue, dir, S_IRUSR);
+#ifdef CONFIG_IWLWIFI_DEBUG
DEBUGFS_ADD_FILE(log_event, dir, S_IWUSR | S_IRUSR);
+#endif
DEBUGFS_ADD_FILE(interrupt, dir, S_IWUSR | S_IRUSR);
DEBUGFS_ADD_FILE(csr, dir, S_IWUSR);
DEBUGFS_ADD_FILE(fh_reg, dir, S_IRUSR);
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 226faab..fc35308 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1922,14 +1922,14 @@ static int __devexit xennet_remove(struct xenbus_device *dev)
dev_dbg(&dev->dev, "%s\n", dev->nodename);
- unregister_netdev(info->netdev);
-
xennet_disconnect_backend(info);
- del_timer_sync(&info->rx_refill_timer);
-
xennet_sysfs_delif(info->netdev);
+ unregister_netdev(info->netdev);
+
+ del_timer_sync(&info->rx_refill_timer);
+
free_percpu(info->stats);
free_netdev(info->netdev);
diff --git a/drivers/oprofile/oprofile_perf.c b/drivers/oprofile/oprofile_perf.c
index da14432..efc4b7f 100644
--- a/drivers/oprofile/oprofile_perf.c
+++ b/drivers/oprofile/oprofile_perf.c
@@ -25,7 +25,7 @@ static int oprofile_perf_enabled;
static DEFINE_MUTEX(oprofile_perf_mutex);
static struct op_counter_config *counter_config;
-static struct perf_event **perf_events[nr_cpumask_bits];
+static struct perf_event **perf_events[NR_CPUS];
static int num_counters;
/*
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 4b63c73..a26a6e9 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1811,6 +1811,8 @@ static int sd_try_rc16_first(struct scsi_device *sdp)
{
if (sdp->host->max_cmd_len < 16)
return 0;
+ if (sdp->try_rc_10_first)
+ return 0;
if (sdp->scsi_level > SCSI_SPC_2)
return 1;
if (scsi_device_protection(sdp))
diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c
index 54423ab..2ee187f 100644
--- a/drivers/staging/iio/adc/ad7606_core.c
+++ b/drivers/staging/iio/adc/ad7606_core.c
@@ -241,6 +241,7 @@ static const struct attribute_group ad7606_attribute_group = {
.indexed = 1, \
.channel = num, \
.address = num, \
+ .info_mask = (1 << IIO_CHAN_INFO_SCALE_SHARED), \
.scan_index = num, \
.scan_type = IIO_ST('s', 16, 16, 0), \
}
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index ec41d38..f4b738f 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -102,6 +102,8 @@ static struct usb_device_id rtl871x_usb_id_tbl[] = {
/* - */
{USB_DEVICE(0x20F4, 0x646B)},
{USB_DEVICE(0x083A, 0xC512)},
+ {USB_DEVICE(0x25D4, 0x4CA1)},
+ {USB_DEVICE(0x25D4, 0x4CAB)},
/* RTL8191SU */
/* Realtek */
diff --git a/drivers/staging/rts_pstor/rtsx_transport.c b/drivers/staging/rts_pstor/rtsx_transport.c
index 4e3d2c1..9b2e5c9 100644
--- a/drivers/staging/rts_pstor/rtsx_transport.c
+++ b/drivers/staging/rts_pstor/rtsx_transport.c
@@ -335,6 +335,7 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card,
int sg_cnt, i, resid;
int err = 0;
long timeleft;
+ struct scatterlist *sg_ptr;
u32 val = TRIG_DMA;
if ((sg == NULL) || (num_sg <= 0) || !offset || !index)
@@ -371,7 +372,7 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card,
sg_cnt = dma_map_sg(&(rtsx->pci->dev), sg, num_sg, dma_dir);
resid = size;
-
+ sg_ptr = sg;
chip->sgi = 0;
/* Usually the next entry will be @sg@ + 1, but if this sg element
* is part of a chained scatterlist, it could jump to the start of
@@ -379,14 +380,14 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card,
* the proper sg
*/
for (i = 0; i < *index; i++)
- sg = sg_next(sg);
+ sg_ptr = sg_next(sg_ptr);
for (i = *index; i < sg_cnt; i++) {
dma_addr_t addr;
unsigned int len;
u8 option;
- addr = sg_dma_address(sg);
- len = sg_dma_len(sg);
+ addr = sg_dma_address(sg_ptr);
+ len = sg_dma_len(sg_ptr);
RTSX_DEBUGP("DMA addr: 0x%x, Len: 0x%x\n",
(unsigned int)addr, len);
@@ -415,7 +416,7 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card,
if (!resid)
break;
- sg = sg_next(sg);
+ sg_ptr = sg_next(sg_ptr);
}
RTSX_DEBUGP("SG table count = %d\n", chip->sgi);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index aa0c43f..35e6b5f 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -93,6 +93,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
@@ -134,7 +135,13 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+ { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+ { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+ { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+ { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+ { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
@@ -146,7 +153,11 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 61d6c31..21a4734 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -235,6 +235,7 @@ static void option_instat_callback(struct urb *urb);
#define NOVATELWIRELESS_PRODUCT_G1 0xA001
#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
+#define NOVATELWIRELESS_PRODUCT_MC551 0xB001
/* AMOI PRODUCTS */
#define AMOI_VENDOR_ID 0x1614
@@ -496,6 +497,10 @@ static void option_instat_callback(struct urb *urb);
/* MediaTek products */
#define MEDIATEK_VENDOR_ID 0x0e8d
+/* Cellient products */
+#define CELLIENT_VENDOR_ID 0x2692
+#define CELLIENT_PRODUCT_MEN200 0x9005
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@@ -730,6 +735,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
+ /* Novatel Ovation MC551 a.k.a. Verizon USB551L */
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -1227,6 +1234,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */
+ { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 13b8bcd..3799fa4 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -213,6 +213,12 @@ static int slave_configure(struct scsi_device *sdev)
if (us->fflags & US_FL_NO_READ_CAPACITY_16)
sdev->no_read_capacity_16 = 1;
+ /*
+ * Many devices do not respond properly to READ_CAPACITY_16.
+ * Tell the SCSI layer to try READ_CAPACITY_10 first.
+ */
+ sdev->try_rc_10_first = 1;
+
/* assume SPC3 or latter devices support sense size > 18 */
if (sdev->scsi_level > SCSI_SPC_2)
us->fflags |= US_FL_SANE_SENSE;
diff --git a/fs/exec.c b/fs/exec.c
index 160cd2f..fa4dd09 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -820,10 +820,10 @@ static int exec_mmap(struct mm_struct *mm)
/* Notify parent that we're no longer interested in the old VM */
tsk = current;
old_mm = current->mm;
- sync_mm_rss(tsk, old_mm);
mm_release(tsk, old_mm);
if (old_mm) {
+ sync_mm_rss(tsk, old_mm);
/*
* Make sure that if there is a core dump in progress
* for the old mm, we get out and die instead of going
diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c
index 08a07a2..57ceaf3 100644
--- a/fs/nilfs2/gcinode.c
+++ b/fs/nilfs2/gcinode.c
@@ -191,6 +191,8 @@ void nilfs_remove_all_gcinodes(struct the_nilfs *nilfs)
while (!list_empty(head)) {
ii = list_first_entry(head, struct nilfs_inode_info, i_dirty);
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index bb24ab6..6f24e67 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2309,6 +2309,8 @@ nilfs_remove_written_gcinodes(struct the_nilfs *nilfs, struct list_head *head)
if (!test_bit(NILFS_I_UPDATED, &ii->i_state))
continue;
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index a03c098..bc00876 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -445,6 +445,18 @@ static inline int pmd_write(pmd_t pmd)
#endif /* __HAVE_ARCH_PMD_WRITE */
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#ifndef pmd_read_atomic
+static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
+{
+ /*
+ * Depend on compiler for an atomic pmd read. NOTE: this is
+ * only going to work, if the pmdval_t isn't larger than
+ * an unsigned long.
+ */
+ return *pmdp;
+}
+#endif
+
/*
* This function is meant to be used by sites walking pagetables with
* the mmap_sem hold in read mode to protect against MADV_DONTNEED and
@@ -458,14 +470,30 @@ static inline int pmd_write(pmd_t pmd)
* undefined so behaving like if the pmd was none is safe (because it
* can return none anyway). The compiler level barrier() is critically
* important to compute the two checks atomically on the same pmdval.
+ *
+ * For 32bit kernels with a 64bit large pmd_t this automatically takes
+ * care of reading the pmd atomically to avoid SMP race conditions
+ * against pmd_populate() when the mmap_sem is hold for reading by the
+ * caller (a special atomic read not done by "gcc" as in the generic
+ * version above, is also needed when THP is disabled because the page
+ * fault can populate the pmd from under us).
*/
static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd)
{
- /* depend on compiler for an atomic pmd read */
- pmd_t pmdval = *pmd;
+ pmd_t pmdval = pmd_read_atomic(pmd);
/*
* The barrier will stabilize the pmdval in a register or on
* the stack so that it will stop changing under the code.
+ *
+ * When CONFIG_TRANSPARENT_HUGEPAGE=y on x86 32bit PAE,
+ * pmd_read_atomic is allowed to return a not atomic pmdval
+ * (for example pointing to an hugepage that has never been
+ * mapped in the pmd). The below checks will only care about
+ * the low part of the pmd with 32bit PAE x86 anyway, with the
+ * exception of pmd_none(). So the important thing is that if
+ * the low part of the pmd is found null, the high part will
+ * be also null or the pmd_none() check below would be
+ * confused.
*/
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
barrier();
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 5b42f1b..e32f8e8 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -56,8 +56,18 @@ struct page {
};
union {
+#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
+ defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)
/* Used for cmpxchg_double in slub */
unsigned long counters;
+#else
+ /*
+ * Keep _count separate from slub cmpxchg_double data.
+ * As the rest of the double word is protected by
+ * slab_lock but _count is not.
+ */
+ unsigned counters;
+#endif
struct {
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 5591ed5..a8f4b75 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -150,6 +150,7 @@ struct scsi_device {
SD_LAST_BUGGY_SECTORS */
unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
+ unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
unsigned is_visible:1; /* is the device visible in sysfs */
DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
diff --git a/kernel/exit.c b/kernel/exit.c
index 5a8a66e..83fea52 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -641,6 +641,7 @@ static void exit_mm(struct task_struct * tsk)
mm_release(tsk, mm);
if (!mm)
return;
+ sync_mm_rss(tsk, mm);
/*
* Serialize with any possible pending coredump.
* We must hold mmap_sem around checking core_state
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index f961cc5..da587ad 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -619,6 +619,8 @@ int recv_tt_query(struct sk_buff *skb, struct hard_iface *recv_if)
/* packet needs to be linearized to access the TT changes */
if (skb_linearize(skb) < 0)
goto out;
+ /* skb_linearize() possibly changed skb->data */
+ tt_query = (struct tt_query_packet *)skb->data;
if (is_my_mac(tt_query->dst))
handle_tt_response(bat_priv, tt_query);
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 5f09a57..088af45 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -1816,10 +1816,10 @@ bool is_ap_isolated(struct bat_priv *bat_priv, uint8_t *src, uint8_t *dst)
{
struct tt_local_entry *tt_local_entry = NULL;
struct tt_global_entry *tt_global_entry = NULL;
- bool ret = true;
+ bool ret = false;
if (!atomic_read(&bat_priv->ap_isolation))
- return false;
+ goto out;
tt_local_entry = tt_local_hash_find(bat_priv, dst);
if (!tt_local_entry)
@@ -1829,10 +1829,10 @@ bool is_ap_isolated(struct bat_priv *bat_priv, uint8_t *src, uint8_t *dst)
if (!tt_global_entry)
goto out;
- if (_is_ap_isolated(tt_local_entry, tt_global_entry))
+ if (!_is_ap_isolated(tt_local_entry, tt_global_entry))
goto out;
- ret = false;
+ ret = true;
out:
if (tt_global_entry)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index c1c99dd..d57d05b 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1369,7 +1369,7 @@ static void reg_set_request_processed(void)
spin_unlock(®_requests_lock);
if (last_request->initiator == NL80211_REGDOM_SET_BY_USER)
- cancel_delayed_work_sync(®_timeout);
+ cancel_delayed_work(®_timeout);
if (need_more_processing)
schedule_work(®_work);
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 0005bde..5f096a5 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5988,6 +5988,7 @@ static const struct hda_codec_preset snd_hda_preset_realtek[] = {
{ .id = 0x10ec0272, .name = "ALC272", .patch = patch_alc662 },
{ .id = 0x10ec0275, .name = "ALC275", .patch = patch_alc269 },
{ .id = 0x10ec0276, .name = "ALC276", .patch = patch_alc269 },
+ { .id = 0x10ec0280, .name = "ALC280", .patch = patch_alc269 },
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
.patch = patch_alc861 },
{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index 11224ed..323d4d9 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -384,14 +384,18 @@ int main(void)
pfd.fd = fd;
while (1) {
+ struct sockaddr *addr_p = (struct sockaddr *) &addr;
+ socklen_t addr_l = sizeof(addr);
pfd.events = POLLIN;
pfd.revents = 0;
poll(&pfd, 1, -1);
- len = recv(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0);
+ len = recvfrom(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0,
+ addr_p, &addr_l);
- if (len < 0) {
- syslog(LOG_ERR, "recv failed; error:%d", len);
+ if (len < 0 || addr.nl_pid) {
+ syslog(LOG_ERR, "recvfrom failed; pid:%u error:%d %s",
+ addr.nl_pid, errno, strerror(errno));
close(fd);
return -1;
}
--
Ben Hutchings
If you seem to know what you are doing, you'll be given more to do.
Attachment:
signature.asc
Description: This is a digitally signed message part