[PATCH v2 05/23] ARM: LPC32xx: Adjust dtsi file for MLC controller configuration

[Roland Stigge]

This patch takes into account that the MTD NAND MLC controller needs more
registers, located actually before the previously allocated memory range,
already starting at 200a8000 instead of 200b0000.

Further, the interrupt for the controller is configured.

Signed-off-by: Roland Stigge <stigge@xxxxxxxxx>
Tested-by: Alexandre Pereira da Silva <aletes.xgr@xxxxxxxxx>

---
 arch/arm/boot/dts/lpc32xx.dtsi |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- linux-2.6.orig/arch/arm/boot/dts/lpc32xx.dtsi
+++ linux-2.6/arch/arm/boot/dts/lpc32xx.dtsi
@@ -38,9 +38,10 @@
 			status = "disable";
 		};
 
-		mlc: flash@200B0000 {
+		mlc: flash@200a8000 {
 			compatible = "nxp,lpc3220-mlc";
-			reg = <0x200B0000 0x1000>;
+			reg = <0x200a8000 0x11000>;
+			interrupts = <11 0>;
 			status = "disable";
 		};
 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/