[PATCH v2 20/23] ARM: LPC32xx: Cleanup board init, remove duplicate clock init

[Roland Stigge]

From: Alexandre Pereira da Silva <aletes.xgr@xxxxxxxxx>

Remove SSP0, CLCD and DMA clocks that are already migrated to
the clock framework.

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@xxxxxxxxx>
Signed-off-by: Roland Stigge <stigge@xxxxxxxxx>
---
 arch/arm/mach-lpc32xx/phy3250.c |   17 -----------------
 1 file changed, 17 deletions(-)

--- linux-2.6.orig/arch/arm/mach-lpc32xx/phy3250.c
+++ linux-2.6/arch/arm/mach-lpc32xx/phy3250.c
@@ -272,28 +272,11 @@ static void __init lpc3250_machine_init(
 
 	lpc32xx_serial_init();
 
-	/*
-	 * AMBA peripheral clocks need to be enabled prior to AMBA device
-	 * detection or a data fault will occur, so enable the clocks
-	 * here.
-	 */
 	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
 	tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
 		LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN;
 	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
 
-	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
-	__raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
-		LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
-	__raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
-		LPC32XX_CLKPWR_SSP_CLK_CTRL);
-
-	tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL);
-	__raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN),
-		     LPC32XX_CLKPWR_DMA_CLK_CTRL);
-
 	/* Test clock needed for UDA1380 initial init */
 	__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
 		LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/