[PATCH] regulator: tps62360: Remove chip_id and voltage_base fromstruct tps62360_chip

From: Axel Lin
Date: Wed Jun 13 2012 - 21:38:29 EST


The chip_id is not used.
The voltage_base is not necessary, set base voltage to tps->desc.min_uV instead.

Signed-off-by: Axel Lin <axel.lin@xxxxxxxxx>
---
drivers/regulator/tps62360-regulator.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/tps62360-regulator.c b/drivers/regulator/tps62360-regulator.c
index e534269..ec3d0d5 100644
--- a/drivers/regulator/tps62360-regulator.c
+++ b/drivers/regulator/tps62360-regulator.c
@@ -65,10 +65,8 @@ struct tps62360_chip {
struct regulator_desc desc;
struct regulator_dev *rdev;
struct regmap *regmap;
- int chip_id;
int vsel0_gpio;
int vsel1_gpio;
- int voltage_base;
u8 voltage_reg_mask;
bool en_internal_pulldn;
bool en_discharge;
@@ -408,13 +406,13 @@ static int __devinit tps62360_probe(struct i2c_client *client,
switch (chip_id) {
case TPS62360:
case TPS62362:
- tps->voltage_base = TPS62360_BASE_VOLTAGE;
+ tps->desc.min_uV = TPS62360_BASE_VOLTAGE;
tps->voltage_reg_mask = 0x3F;
tps->desc.n_voltages = TPS62360_N_VOLTAGES;
break;
case TPS62361:
case TPS62363:
- tps->voltage_base = TPS62361_BASE_VOLTAGE;
+ tps->desc.min_uV = TPS62361_BASE_VOLTAGE;
tps->voltage_reg_mask = 0x7F;
tps->desc.n_voltages = TPS62361_N_VOLTAGES;
break;
@@ -427,7 +425,6 @@ static int __devinit tps62360_probe(struct i2c_client *client,
tps->desc.ops = &tps62360_dcdc_ops;
tps->desc.type = REGULATOR_VOLTAGE;
tps->desc.owner = THIS_MODULE;
- tps->desc.min_uV = tps->voltage_base;
tps->desc.uV_step = 10000;

tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config);
--
1.7.9.5



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/