[PATCH 3/3] Documentation: Device Tree binding information for i2c-nomadikdriver
From: Lee Jones
Date: Wed Jun 13 2012 - 12:08:24 EST
From: Lee Jones <lee.jones@xxxxxxxxxx>
Date: Wed, 13 Jun 2012 17:00:02 +0100
Subject: [PATCH 3/3] Documentation: Device Tree binding information for
i2c-nomadik driver
This document describes each of the non-standard Device Tree bindings
used in the Nomadik I2C driver.
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
Documentation/devicetree/bindings/i2c/nomadik.txt | 33 +++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/nomadik.txt
diff --git a/Documentation/devicetree/bindings/i2c/nomadik.txt b/Documentation/devicetree/bindings/i2c/nomadik.txt
new file mode 100644
index 0000000..18cea18
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nomadik.txt
@@ -0,0 +1,33 @@
+I2C for Nomadik based systems
+
+Required (non-standard) properties:
+ - Nil
+
+Recommended (non-standard) properties:
+ - clock-frequency : Maximum bus clock frequency for the device
+ - stericsson,slsu : Data line delay
+ - stericsson,tft : Tx FIFO threshold
+ - stericsson,rft : Rx FIFO threshold
+ - stericsson,timeout : Slave response timeout(ms)
+ - stericsson,i2c_freq_mode_fast : I2C fast mode (omit for standard mode)
+
+Optional (non-standard) properties:
+ - Nil
+
+Example :
+
+i2c@80004000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+ reg = <0x80004000 0x1000>;
+ interrupts = <0 21 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ v-i2c-supply = <&db8500_vape_reg>;
+
+ clock-frequency = <100000>;
+ stericsson,slsu = <0xe>;
+ stericsson,tft = <1>;
+ stericsson,rft = <8>;
+ stericsson,timeout = <200>;
+ stericsson,i2c_freq_mode_fast;
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/