OOPS firmware not loaded

[cijoml]

Hi guys, 

after upgrade to the 3.4.X kernel my dongle does not resume correctly. 
Firmware is in its place and when I remove and plug it again into USB slot, 
firmware is loaded.
There is one more long lasting problem, when I suspend with DVB stream 
playing, computer freezes completely! 

Thank you for fix. 

PM: resume of devices complete after 1944.596 msecs
dvb-usb: found a 'Leadtek Winfast DTV Dongle (STK7700P based)' in cold 
state, will try to load a firmware
------------[ cut here ]------------
WARNING: at drivers/base/firmware_class.c:597 request_firmware+0x45/0xae()
Hardware name: 901
Modules linked in: rndis_host cdc_ether usbnet mii i915 drm_kms_helper 
cfbcopyarea cfbimgblt cfbfillrect rfcomm bnep aes_i586 aes_generic loop 
rc_dib0700_rc5 dvb_usb_dib0700 dib0090 dib7000p dib7000m dib0070 dvb_usb 
dib8000 mt2266 tuner_xc2028 dib3000mc mxl5007t xc5000 s5h1411 mt2060 
lgdt3305 dvb_core rc_core xc4000 dibx000_common usbhid hid cryptomgr aead 
btusb bluetooth arc4 crypto_algapi snd_hda_codec_realtek snd_hda_intel 
snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_oss 
snd_seq_midi_event snd_seq rtl8192ce rtl8192c_common rtlwifi snd_timer 
snd_seq_device mac80211 coretemp uhci_hcd psmouse cfg80211 ehci_hcd snd 
video eeepc_laptop sparse_keymap hwmon rfkill pci_hotplug atl1e 
snd_page_alloc
Pid: 7691, comm: pm-suspend Tainted: G        W    3.4.1 #1
Call Trace:
[<c1022639>] ? warn_slowpath_common+0x7c/0x8f
[<c11e0777>] ? request_firmware+0x45/0xae
[<c11e0777>] ? request_firmware+0x45/0xae
[<c1022667>] ? warn_slowpath_null+0x1b/0x1e
[<c11e0777>] ? request_firmware+0x45/0xae
[<f880db3d>] ? dib0700_identify_state+0x81/0x89 [dvb_usb_dib0700]
[<f87ae245>] ? dvb_usb_download_firmware+0x21/0xa4 [dvb_usb]
[<f880dabc>] ? dib0700_probe+0xa2/0xa2 [dvb_usb_dib0700]
[<f880dabc>] ? dib0700_probe+0xa2/0xa2 [dvb_usb_dib0700]
[<f87ae52f>] ? dvb_usb_device_init+0x157/0x518 [dvb_usb]
[<f880da4f>] ? dib0700_probe+0x35/0xa2 [dvb_usb_dib0700]
[<c1214d6d>] ? usb_match_one_id+0x19/0x6e
[<c12154c1>] ? usb_probe_interface+0xa6/0xe7
[<c10e06d2>] ? sysfs_create_link+0xf/0x11
[<c11d9b7d>] ? driver_probe_device+0x86/0x167
[<c1214f61>] ? usb_device_match+0x31/0x54
[<c11d8a02>] ? bus_for_each_drv+0x37/0x5f
[<c11d9d4e>] ? device_attach+0x52/0x69
[<c11d9cb9>] ? __driver_attach+0x5b/0x5b
[<c121588e>] ? usb_rebind_intf+0x25/0x42
[<c12158d3>] ? usb_resume_complete+0x28/0x36
[<c11dd983>] ? dpm_complete+0xb7/0x111
[<c10463bc>] ? suspend_devices_and_enter+0x164/0x189
[<c10464fb>] ? pm_suspend+0x11a/0x137
[<c1045c59>] ? state_store+0x75/0x90
[<c1045be4>] ? pm_async_store+0x2f/0x2f
[<c1146abe>] ? kobj_attr_store+0x1a/0x22
[<c10def7b>] ? sysfs_write_file+0xbd/0xe9
[<c10deebe>] ? sysfs_open_file+0x1c5/0x1c5
[<c109fd03>] ? vfs_write+0x7a/0xad
[<c109fdd6>] ? sys_write+0x41/0x67
[<c12a850c>] ? sysenter_do_call+0x12/0x22
---[ end trace 7632ba16109d1440 ]---
usb 2-2.3: firmware: dvb-usb-dib0700-1.20.fw will not be loaded
dvb-usb: did not find the firmware file. (dvb-usb-dib0700-1.20.fw) Please 
see linux/Documentation/dvb/ for more details on firmware-problems. (-11)
Restarting tasks ... done.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/