[ 23/82] wl1251: fix oops on early interrupt

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Grazvydas Ignotas <notasas@xxxxxxxxx>

commit f380f2c4a12e913356bd49f8790ec1063c4fe9f8 upstream.

This driver disables interrupt just after requesting it and enables it
later, after interface is up. However currently there is a time window
between request_irq() and disable_irq() where if interrupt arrives, the
driver oopses because it's not yet ready to process it. This can be
reproduced by inserting the module, associating and removing the module
multiple times.

Eliminate this race by setting IRQF_NOAUTOEN flag before request_irq().

Signed-off-by: Grazvydas Ignotas <notasas@xxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
 drivers/net/wireless/wl1251/sdio.c |    2 +-
 drivers/net/wireless/wl1251/spi.c  |    3 +--
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/wl1251/sdio.c b/drivers/net/wireless/wl1251/sdio.c
index 1b851f6..e2750a1 100644
--- a/drivers/net/wireless/wl1251/sdio.c
+++ b/drivers/net/wireless/wl1251/sdio.c
@@ -260,6 +260,7 @@ static int wl1251_sdio_probe(struct sdio_func *func,
 	}
 
 	if (wl->irq) {
+		irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
 		ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl);
 		if (ret < 0) {
 			wl1251_error("request_irq() failed: %d", ret);
@@ -267,7 +268,6 @@ static int wl1251_sdio_probe(struct sdio_func *func,
 		}
 
 		irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
-		disable_irq(wl->irq);
 
 		wl1251_sdio_ops.enable_irq = wl1251_enable_line_irq;
 		wl1251_sdio_ops.disable_irq = wl1251_disable_line_irq;
diff --git a/drivers/net/wireless/wl1251/spi.c b/drivers/net/wireless/wl1251/spi.c
index 6248c35..87f6305 100644
--- a/drivers/net/wireless/wl1251/spi.c
+++ b/drivers/net/wireless/wl1251/spi.c
@@ -281,6 +281,7 @@ static int __devinit wl1251_spi_probe(struct spi_device *spi)
 
 	wl->use_eeprom = pdata->use_eeprom;
 
+	irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
 	ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
 	if (ret < 0) {
 		wl1251_error("request_irq() failed: %d", ret);
@@ -289,8 +290,6 @@ static int __devinit wl1251_spi_probe(struct spi_device *spi)
 
 	irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
 
-	disable_irq(wl->irq);
-
 	ret = wl1251_init_ieee80211(wl);
 	if (ret)
 		goto out_irq;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/