RE: [PATCH RFC] c_can_pci: generic module for c_can on PCI

From: Bhupesh SHARMA
Date: Tue Jun 05 2012 - 09:04:40 EST




> -----Original Message-----
> From: Federico Vaga [mailto:federico.vaga@xxxxxxxxx]
> Sent: Tuesday, June 05, 2012 4:49 PM
> To: Bhupesh SHARMA
> Cc: Alan Cox; Wolfgang Grandegger; Marc Kleine-Budde; Giancarlo
> ASNAGHI; Alan Cox; Alessandro Rubini; linux-can@xxxxxxxxxxxxxxx;
> netdev@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH RFC] c_can_pci: generic module for c_can on PCI
>
> > In some of these SoC's the C_CAN registers which are essentially
> > 16-bit or 32-bit registers are aligned always to a 32-bit boundary
> > (i.e. even a 16-bit register is aligned to 32-bit boundary).
> >
> > So, I had to implement two variants of the read/write reg routines. I
> > am not sure your SoC implementation needs them. If it does, I will
> > categorize it as flaky as well :)
>
> My implementation is align to 32, but I'm trying to make a generic PCI
> wrapper (some other could be aligned to 16)

So it means your implementation is also flaky and you are probably wasting HW memory
space while integrating the Bosch C_CAN module in your SoC :)

> > See above. There was a reason for keeping these routines in
> > c_can_platform.c Simply put, every platform having a Bosch C_CAN
> > module can have it's own implementation of the bus (for example you
> > use PCI) and register bank layout (16-bit or 32-bit aligned).
>
> I don't understand the reason to keep these functions in
> c_can_platform.c . Two generic read/write functions could be written
> into c_can.c by using a shift value (0 if aligned to 16, 1 if aligned
> to
> 32) as I showed in the previous mail:
>
> > > static u16 c_can_read_reg(struct c_can_priv *priv, enum reg index)
> > > {
> > >
> > > return readw(priv->base + (priv->regs[index] << priv->offset));
> > >
> > > }
> > > static void c_can_write_reg(struct c_can_priv *priv, enum reg
> index,
> > >
> > > u16 val)
> > >
> > > {
> > >
> > > writew(val, priv->base + (priv->regs[index] << priv->offset));
> > >
> > > }
>
> Every platform having a Bosch C_CAN/D_CAN can specify its shift value
> (0
> or 1) and it's done.
>

I am not a big fan of adding platform specific flakes in any core file, that why we keep the platform
file separate from the core ones. But I will left Marc and Wolfgang to further comment on the same.

Regards,
Bhupesh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/