[PATCH 2/2] 8139cp/8139too: terminate the eeprom access with theright opmode

From: Jason Wang
Date: Fri Jun 01 2012 - 00:18:13 EST


Currently, we terminate the eeprom access through clearing the CS by:

RTL_W8 (Cfg9346, ~EE_CS); or writeb (~EE_CS, ee_addr);

This would left the eeprom into "Config. Register Write Enable:"
state which is not expcted as the highest two bits were set to
0x11 ( expected is the "Normal" mode (0x00)). Solving this by write
0x0 instead of ~EE_CS when terminating the eeprom access.

Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
---
drivers/net/ethernet/realtek/8139cp.c | 2 +-
drivers/net/ethernet/realtek/8139too.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 7f08779..995d0cf 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -1636,7 +1636,7 @@ static void eeprom_cmd(void __iomem *ee_addr, int cmd, int cmd_len)

static void eeprom_cmd_end(void __iomem *ee_addr)
{
- writeb (~EE_CS, ee_addr);
+ writeb(0, ee_addr);
eeprom_delay ();
}

diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index 03df076..1d83565 100644
--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -1173,7 +1173,7 @@ static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_l
}

/* Terminate the EEPROM access. */
- RTL_W8 (Cfg9346, ~EE_CS);
+ RTL_W8(Cfg9346, 0);
eeprom_delay ();

return retval;

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/