Re: [PATCH] RAS: Add a tracepoint for reporting memory controllerevents

[Borislav Petkov]

On Thu, May 31, 2012 at 01:14:26PM -0300, Mauro Carvalho Chehab wrote:
> > 5 amd76x_edac.c     amd76x_init_csrows          214 dimm->grain = dimm->nr_pages << PAGE_SHIFT;
> > 6 cpc925_edac.c     cpc925_init_csrows          367 dimm->grain = 32;
> > 7 cpc925_edac.c     cpc925_init_csrows          371 dimm->grain = 64;
> > 8 e752x_edac.c      e752x_init_csrows          1119 dimm->grain = 1 << 12;
> > 9 e7xxx_edac.c      e7xxx_init_csrows           399 dimm->grain = 1 << 12;
> > k i3000_edac.c      i3000_probe1                416 dimm->grain = I3000_DEAP_GRAIN;
> > l i3200_edac.c      i3200_probe1                395 dimm->grain = nr_pages << PAGE_SHIFT;
> > m i5000_edac.c      i5000_init_csrows          1286 dimm->grain = 8;
> > n i5100_edac.c      i5100_init_csrows           852 dimm->grain = 32;
> > o i5400_edac.c      i5400_init_dimms           1212 dimm->grain = 8;
> > p i7300_edac.c      decode_mtr                  662 dimm->grain = 8;
> > q i7core_edac.c     get_dimm_config             637 dimm->grain = 8;
> > r i82443bxgx_edac.c i82443bxgx_init_csrows      225 dimm->grain = 1 << 12;
> > s i82860_edac.c     i82860_init_csrows          180 dimm->grain = 1 << 12;
> > t i82875p_edac.c    i82875p_init_csrows         388 dimm->grain = 1 << 12;
> > v i82975x_edac.c    i82975x_init_csrows         430 dimm->grain = 1 << 7;
> > w mpc85xx_edac.c    mpc85xx_init_csrows         956 dimm->grain = 8;
> > x mv64x60_edac.c    mv64x60_init_csrows         677 dimm->grain = 8;
> > y pasemi_edac.c     pasemi_edac_init_csrows     183 dimm->grain = PASEMI_EDAC_ERROR_GRAIN;
> > z ppc4xx_edac.c     ppc4xx_edac_init_csrows     983 dimm->grain = 1;
> > A r82600_edac.c     r82600_init_csrows          259 dimm->grain = 1 << 14;
> > B sb_edac.c         get_dimm_config             597 dimm->grain = 32;
> > C tile_edac.c       tile_edac_init_csrows       117 dimm->grain = TILE_EDAC_ERROR_GRAIN;
> > D x38_edac.c        x38_probe1                  394 dimm->grain = nr_pages << PAGE_SHIFT;
> 
> The grains among the drivers are different; userspace needs to know, so an
> API is needed.

Sure, that's why I'm preaching about sysfs or dmesg for so long.

[ â ]

> > Don't create a bloated API just to fit your purpose because you're
> > staring at the world through your glasses.
> 
> It is not a bloated API. The error grain should be reported to userspace,
> as:
> 	- Not all drivers have the same address granularity, as you've shown
> 	  above;

Yes.

> 	- No other userspace API provides it;

Yes, it should.

> 	- The granularity is a property of the per-error address;

Not necessarily, as it is shown above.

> 	- There are well-known cases where the address grain changes are
> 	  dynamically filled by the error registers (MCA arch on Intel).

Ok.

> So, the memory error tracepoint is the proper place to store it, as it is
> the place where the address and the other memory error information is
> reported to userspace.

Yes, but not as a separate field but in driver_detail _only_ on those
drivers where grain is dynamic. The remaining ones simply don't output
it all because they have done so in dmesg or sysfs.

> Also, converting the grain to a string, as you proposed would require
> at least 26 bytes to store "grain: 0xdeadbeef:deadbeef", while putting
> it as a u64 will consume only 8 bytes.

Again, only on those drivers which have dynamic grain. Other drivers
which keep outputting 'x' (and 'x' doesn't change) on every tracepoint
invocation don't need to output it all in the tracepoint. Their
tracepoint records shouldn't be inflated for no reason.

-- 
Regards/Gruss,
Boris.

Advanced Micro Devices GmbH
Einsteinring 24, 85609 Dornach
GM: Alberto Bozzo
Reg: Dornach, Landkreis Muenchen
HRB Nr. 43632 WEEE Registernr: 129 19551
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/