Re: [PATCH 02/11] PCI: Try to allocate mem64 above 4G at first

[Bjorn Helgaas]

On Tue, May 29, 2012 at 2:40 PM, Yinghai Lu <yinghai@xxxxxxxxxx> wrote:
> On Tue, May 29, 2012 at 12:23 PM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote:
>> On Tue, May 29, 2012 at 12:17 PM, Yinghai Lu <yinghai@xxxxxxxxxx> wrote:
>>> On Tue, May 29, 2012 at 10:57 AM, H. Peter Anvin <hpa@xxxxxxxxx> wrote:
>>>> On 05/29/2012 10:55 AM, Yinghai Lu wrote:
>>>>>
>>>>> x86 are using 16bits.
>>>>>
>>>>> some others use 32 bits.
>>>>> #define IO_SPACE_LIMIT 0xffffffff
>>>>>
>>>>> ia64 and sparc are using 64bits.
>>>>> #define IO_SPACE_LIMIT               0xffffffffffffffffUL
>>>>>
>>>>> but pci only support 16bits and 32bits.
>>>>>
>>>>> maybe later we can add
>>>>> PCI_MAX_RESOURCE_16
>>>>>
>>>>> to handle 16bits and 32bit io ports.
>>>>>
>>>>
>>>> Shouldn't this be dealt by root port apertures?
>>>>
>>>
>>> pci bridge could support 16bits and 32bits io port.
>>> but we did not record if 32bits is supported.
>>>
>>> so during allocating, could have allocated above 64k address to non
>>> 32bit bridge.
>>>
>>> but  x86 is ok, because ioport.end always set to 0xffff.
>>> other arches with IO_SPACE_LIMIT with 0xffffffff or
>>> 0xffffffffffffffffUL may have problem.
>>
>> I think current IO_SPACE_LIMIT usage is a little confused.  The
>> "ioport_resource.end = IO_SPACE_LIMIT" in kernel/resource.c refers to
>> a CPU-side address, not a bus address.  Other uses, e.g., in
>> __pci_read_base(), apply it to bus addresses from BARs, which is
>> wrong.  Host bridges apply I/O port offsets just like they apply
>> memory offsets.  The ia64 IO_SPACE_LIMIT of 0xffffffffffffffffUL means
>> there's no restriction on CPU-side I/O port addresses, but any given
>> host bridge will translate its I/O port aperture to bus addresses that
>> fit in 32 bits.
>>
>> None of this is really relevant to the question I asked, namely, "why
>> Yinghai's patch doesn't limit I/O BAR values to 32 bits?"  That
>> constraint is clearly a requirement because I/O BARs are only 32 bits
>> wide, but I don't think it needs to be enforced in the code here.  The
>> host bridge or upstream P2P bridge apertures should already take care
>> of that automatically.  I don't think the 16- or 32-bitness of P2P
>> bridge apertures is relevant here, because the I/O resources available
>> on the secondary bus already reflect that.
>>
>> After all that discussion, I think my objection here boils down to
>> "you shouldn't change the I/O BAR constraints in a patch that claims
>> to allocate 64-bit *memory* BARs above 4GB."
>>
>> I think the code below is still the clearest way to set the constraints:
>>
>>   if (res->flags & IORESOURCE_MEM_64) {
>>       start = (resource_size_t) (1ULL << 32);
>>       end = PCI_MAX_RESOURCE;
>>   } else {
>>       start = 0;
>>       end = PCI_MAX_RESOURCE_32;
>>   }
>>
>> It's not strictly necessary to limit I/O BARs to PCI_MAX_RESOURCE_32
>> because host bridge apertures should already enforce that, but I think
>> the code above just makes it clearer.
>
>
> ok, please check the version, that put back PCI_MAX_RESOURCE_32 for io ports.
>
> also RFC to limit for 16 bit ioport handling.  only help other arches
> that does support 32bit ioports but have bridges only support 16bit io
> ports.

I don't understand this one at all.  It looks like you mashed together
at least two changes: (1) prefer I/O space above 64K if available, and
(2) mark secondary bus resources with IORESOURCE_IO_32 when the P2P
bridge I/O window address decode type is PCI_IO_RANGE_TYPE_32 and use
that to limit allocations.

I don't see the justification for (1).  What problem does this solve?

I don't see the need for (2).  Even without the start/end constraints
in pci_bus_alloc_resource(), we only allocate from the resources
available on the bus.  Apparently you think this list might be
incorrect, i.e., it might include I/O space above 64K when it
shouldn't.  I don't think that's the case, but if it is, we should fix
the list of bus resources, not add a hack to avoid parts of it.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/