[ 44/94] 8250_pci: fix pch uart matching

[Greg KH]

3.3-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnaud Patard <apatard@xxxxxxxxxxxxx>

commit aaa10eb1d0034eccc096f583fe308f0921617598 upstream.

The rules used to make 8250_pci "ignore" the PCH uarts are lacking pci subids
entries, preventing it to match and thus is breaking serial port support for
theses systems.

This has been tested on a nanoETXexpress-TT, which has a specifici uart clock.

Tested-by: Erwan Velu <Erwan.Velu@xxxxxxxxxxxxxxxxxxx>
[stable@: please apply to 3.0-stable, 3.2-stable and 3.3-stable]
Signed-off-by: Arnaud Patard <apatard@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/tty/serial/8250/8250_pci.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1609,54 +1609,72 @@ static struct pci_serial_quirk pci_seria
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8811,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8812,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8813,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8814,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8027,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8028,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8029,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x800C,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x800D,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/