Re: Why USB Link Power Management only for devices connected to roothub

[Greg KH]

On Tue, May 22, 2012 at 11:42:28AM +0530, prasannatsmkumar wrote:
> I have started looking into USB stuff. In the EHCI driver code I could
> see the comment that "we only support lpm device connected to root hub
> yet" in drivers/usb/host/ehci-pci.c line 466 (3.4 kernel -
> http://lxr.free-electrons.com/source/drivers/usb/host/ehci-pci.c#L466).
> Is there any reason to not support lpm in devices connected to hub
> (other than root hub)? Also inside ehci_lpm_check function in
> drivers/usb/host/ehci-lpm.c (3.4 kernel -
> http://lxr.free-electrons.com/source/drivers/usb/host/ehci-lpm.c) the
> USB device is asked to go to LPM mode and there is a wait for 10ms. I
> guess the LPM transition (L0 to L1 state transition) should take place
> within some micro seconds then why should we wait for 10ms for ACK?

Please as USB-specific questions like this on the linux-usb mailing list
if you wish to get answers.

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/