[PATCH 1/2] staging: media: go7007: Adlink MPG24 board
From: Volokh Konstantin
Date: Sun May 13 2012 - 14:55:26 EST
This patch applies only for Adlink MPG24 board with go7007, all these changes were tested for continuous loading & restarting modes
This is minimal changes needed for start up go7007 to work correctly
in 3.4 branch
Changes:
- When go7007 reset device, i2c was not working (need rewrite GPIO5)
- As wis2804 has i2c_addr=0x00/*really*/, so Need set I2C_CLIENT_TEN flag for validity
- some main nonzero initialization, rewrites with kzalloc instead kmalloc
- STATUS_SHUTDOWN was placed in incorrect place, so if firmware wasn`t loaded, we
failed v4l2_device_unregister with kernel panic (OOPS)
- some new v4l2 style features as call_all(...s_stream...) for using subdev calls
Signed-off-by: Volokh Konstantin <volokh84@xxxxxxxxx>
---
drivers/staging/media/go7007/README | 22 +++++++++++++++++++++
drivers/staging/media/go7007/go7007-driver.c | 27 +++++++++++++++++--------
drivers/staging/media/go7007/go7007-priv.h | 2 +-
drivers/staging/media/go7007/go7007-usb.c | 5 +---
drivers/staging/media/go7007/go7007-v4l2.c | 7 ++++-
5 files changed, 47 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/media/go7007/README b/drivers/staging/media/go7007/README
index 48f4476..22544a7 100644
--- a/drivers/staging/media/go7007/README
+++ b/drivers/staging/media/go7007/README
@@ -5,6 +5,28 @@ Todo:
and added to the build.
- testing?
- handle churn in v4l layer.
+ - Some features for wis-tw2804 subdev control (comb filter,coring,IF comp,peak,more over...)
+ - Cropping&Scaling on tw2804
+ - Motion detector on tw2804, spatial&temporal sensitivity & masks control,velocity
+ - Control Output Format on tw2804
+ - go7007-v4l2.c need rewrite with new v4l2 style without nonstandard IO controls (set detector & bitrate)
+
+05/05/2012 3.4.0-rc+:
+Changes:
+ - When go7007 reset device, i2c was not working (need rewrite GPIO5)
+ - As wis2804 has i2c_addr=0x00/*really*/, so need to set I2C_CLIENT_TEN flag for validity
+ - Some main nonzero initialization, rewrites with kzalloc instead kmalloc
+ - STATUS_SHUTDOWN was placed in incorrect place, so if firmware wasn`t loaded, we
+ failed v4l2_device_unregister with kernel panic (OOPS)
+ - Some new v4l2 style features as call_all(...s_stream...) for using subdev calls
+ - wis-tw2804.ko module code was incompatible with 3.4.x branch in initialization v4l2_subdev parts.
+ now i2c_get_clientdata(...) contains v4l2_subdev struct instead non standard wis_tw2804 struct
+
+Adds:
+ - Switch between 2 composite video inputs on channel: VIN[1,2,3,4]A and VIN[1,2,3,4]B
+ - Additional chipset wis2804 controls with: gain,auto gain,inputs[0,1],color kill,chroma gain,gain balances,
+ for all 4 channels (from tw2804.pdf)
+ - Power control for each 4 ADC up when s_stream(...,1), down otherwise in wis-tw2804 module
Please send patchs to Greg Kroah-Hartman <greg@xxxxxxxxx> and Cc: Ross
Cohen <rcohen@xxxxxxxxxxx> as well.
diff --git a/drivers/staging/media/go7007/go7007-driver.c b/drivers/staging/media/go7007/go7007-driver.c
index ece2dd1..2dff9b5 100644
--- a/drivers/staging/media/go7007/go7007-driver.c
+++ b/drivers/staging/media/go7007/go7007-driver.c
@@ -173,6 +173,11 @@ static int go7007_init_encoder(struct go7007 *go)
go7007_write_addr(go, 0x3c82, 0x0001);
go7007_write_addr(go, 0x3c80, 0x00fe);
}
+ if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) {
+ /* set GPIO5 to be an output, currently low */
+ go7007_write_addr(go, 0x3c82, 0x0000);
+ go7007_write_addr(go, 0x3c80, 0x00df);
+ }
return 0;
}
@@ -192,17 +197,23 @@ int go7007_reset_encoder(struct go7007 *go)
/*
* Attempt to instantiate an I2C client by ID, probably loading a module.
*/
-static int init_i2c_module(struct i2c_adapter *adapter, const char *type,
- int addr)
+static int init_i2c_module(struct i2c_adapter *adapter, const struct go_i2c *const i2c)
{
struct go7007 *go = i2c_get_adapdata(adapter);
struct v4l2_device *v4l2_dev = &go->v4l2_dev;
+ struct i2c_board_info info;
+
+ memset(&info, 0, sizeof(info));
+ strlcpy(info.type, i2c->type, sizeof(info.type));
+ info.addr = i2c->addr;
- if (v4l2_i2c_new_subdev(v4l2_dev, adapter, type, addr, NULL))
+ if (i2c->id == I2C_DRIVERID_WIS_TW2804)
+ info.flags |= I2C_CLIENT_TEN;
+ if (v4l2_i2c_new_subdev_board(v4l2_dev, adapter, &info, NULL))
return 0;
- printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", type);
- return -1;
+ printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", i2c->type);
+ return -EINVAL;
}
/*
@@ -238,9 +249,7 @@ int go7007_register_encoder(struct go7007 *go)
}
if (go->i2c_adapter_online) {
for (i = 0; i < go->board_info->num_i2c_devs; ++i)
- init_i2c_module(&go->i2c_adapter,
- go->board_info->i2c_devs[i].type,
- go->board_info->i2c_devs[i].addr);
+ init_i2c_module(&go->i2c_adapter, &go->board_info->i2c_devs[i]);
if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
i2c_clients_command(&go->i2c_adapter,
DECODER_SET_CHANNEL, &go->channel_number);
@@ -571,7 +580,7 @@ struct go7007 *go7007_alloc(struct go7007_board_info *board, struct device *dev)
struct go7007 *go;
int i;
- go = kmalloc(sizeof(struct go7007), GFP_KERNEL);
+ go = kzalloc(sizeof(struct go7007), GFP_KERNEL);
if (go == NULL)
return NULL;
go->dev = dev;
diff --git a/drivers/staging/media/go7007/go7007-priv.h b/drivers/staging/media/go7007/go7007-priv.h
index b58c394..b7b939a 100644
--- a/drivers/staging/media/go7007/go7007-priv.h
+++ b/drivers/staging/media/go7007/go7007-priv.h
@@ -88,7 +88,7 @@ struct go7007_board_info {
int audio_bclk_div;
int audio_main_div;
int num_i2c_devs;
- struct {
+ struct go_i2c {
const char *type;
int id;
int addr;
diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c
index 5443e25..9dbf5ec 100644
--- a/drivers/staging/media/go7007/go7007-usb.c
+++ b/drivers/staging/media/go7007/go7007-usb.c
@@ -1110,9 +1110,6 @@ static int go7007_usb_probe(struct usb_interface *intf,
} else {
u16 channel;
- /* set GPIO5 to be an output, currently low */
- go7007_write_addr(go, 0x3c82, 0x0000);
- go7007_write_addr(go, 0x3c80, 0x00df);
/* read channel number from GPIO[1:0] */
go7007_read_addr(go, 0x3c81, &channel);
channel &= 0x3;
@@ -1245,7 +1242,6 @@ static void go7007_usb_disconnect(struct usb_interface *intf)
struct urb *vurb, *aurb;
int i;
- go->status = STATUS_SHUTDOWN;
usb_kill_urb(usb->intr_urb);
/* Free USB-related structs */
@@ -1269,6 +1265,7 @@ static void go7007_usb_disconnect(struct usb_interface *intf)
kfree(go->hpi_context);
go7007_remove(go);
+ go->status = STATUS_SHUTDOWN;
}
static struct usb_driver go7007_usb_driver = {
diff --git a/drivers/staging/media/go7007/go7007-v4l2.c b/drivers/staging/media/go7007/go7007-v4l2.c
index 3ef4cd8..e31b338 100644
--- a/drivers/staging/media/go7007/go7007-v4l2.c
+++ b/drivers/staging/media/go7007/go7007-v4l2.c
@@ -100,7 +100,7 @@ static int go7007_open(struct file *file)
if (go->status != STATUS_ONLINE)
return -EBUSY;
- gofh = kmalloc(sizeof(struct go7007_file), GFP_KERNEL);
+ gofh = kzalloc(sizeof(struct go7007_file), GFP_KERNEL);
if (gofh == NULL)
return -ENOMEM;
++go->ref_count;
@@ -955,6 +955,7 @@ static int vidioc_streamon(struct file *file, void *priv,
}
mutex_unlock(&go->hw_lock);
mutex_unlock(&gofh->lock);
+ call_all(&go->v4l2_dev, video, s_stream, 1);
return retval;
}
@@ -970,6 +971,7 @@ static int vidioc_streamoff(struct file *file, void *priv,
mutex_lock(&gofh->lock);
go7007_streamoff(go);
mutex_unlock(&gofh->lock);
+ call_all(&go->v4l2_dev, video, s_stream, 0);
return 0;
}
@@ -1834,5 +1836,6 @@ void go7007_v4l2_remove(struct go7007 *go)
mutex_unlock(&go->hw_lock);
if (go->video_dev)
video_unregister_device(go->video_dev);
- v4l2_device_unregister(&go->v4l2_dev);
+ if (go->status != STATUS_SHUTDOWN)
+ v4l2_device_unregister(&go->v4l2_dev);
}
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/