Re: [PATCH 4/4] usb: otg: twl4030-usb: Don't power down phy when itis in-use by charger.

[Andi Shyti]

Hi,

On Wed, May 09, 2012 at 07:40:40AM +1000, NeilBrown wrote:
> @@ -388,10 +388,16 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
>  					(PHY_CLK_CTRL_CLOCKGATING_EN |
>  						PHY_CLK_CTRL_CLK32K_EN));
>  	} else {
> -		__twl4030_phy_power(twl, 0);
>  		regulator_disable(twl->usb1v5);
>  		regulator_disable(twl->usb1v8);
>  		regulator_disable(twl->usb3v1);
> +		if (!regulator_is_enabled(twl->usb3v1))
> +			/* no-one else is requesting this
> +			 * so it is OK to power-down the
> +			 * phy.  Sometimes a charger might
> +			 * hold the regulator active.
> +			 */
> +			__twl4030_phy_power(twl, 0);
>  	}

Usually a regulator line is shared by more than one device and
regulator_is_enable() returns true if at least one of these
devices is holding the regulator. This means that here the check
will not work if this is your case.

Andi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/