Re: [RESEND PATCH v2 1/2] MFD: MAX77693: add MAX77693 MFD driver

[Kyungmin Park]

Hi Samuel,

On Fri, May 11, 2012 at 11:15 PM, Samuel Ortiz <sameo@xxxxxxxxxxxxxxx> wrote:
> Hi Choi,
>
> On Tue, Mar 20, 2012 at 10:07:58AM +0900, Chanwoo Choi wrote:
>> @@ -0,0 +1,224 @@
>> +/*
>> + * max77693.c - mfd core driver for the MAX 77693
>> + *
>> + * Copyright (C) 2011 Samsung Electronics
> 2012 ?
>
>> +int max77693_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
>> +{
>> +     struct max77693_dev *max77693 = i2c_get_clientdata(i2c);
>> +     int ret;
>> +
>> +     mutex_lock(&max77693->iolock);
>> +     ret = i2c_smbus_read_byte_data(i2c, reg);
>> +     mutex_unlock(&max77693->iolock);
> You don't need this locking as the i2c layer will do it for you.
> Also, this definitely look like a good candidate for a regmap API conversion,
> I'd appreciate if you could work on that.

Right, it's already done. you can find the updated patches in your mail box.

[PATCH v2 0/3] mfd: MAX77686: Add initial support for MAXIM 77686 mfd chip

This patchset adds suppport for MAX77686 which is a multifunction
device including
regulator and rtc. It also contains drivers supporting rtc and regulator.
All drivers ard based on MAX8997 dirvers and use regmap to access to
the inner registers.
To manage IRQs occuered by max77686, it supports IRQ domain.

Thank you,
Kyungmin Park
>
>> +static struct i2c_driver max77693_i2c_driver = {
>> +     .driver = {
>> +                .name = "max77693",
>> +                .owner = THIS_MODULE,
>> +     },
>> +     .probe = max77693_i2c_probe,
>> +     .remove = max77693_i2c_remove,
>> +     .id_table = max77693_i2c_id,
>> +};
>> +
>> +static int __init max77693_i2c_init(void)
>> +{
>> +     return i2c_add_driver(&max77693_i2c_driver);
>> +}
>> +/* init early so consumer devices can complete system boot */
>> +subsys_initcall(max77693_i2c_init);
>> +
>> +static void __exit max77693_i2c_exit(void)
>> +{
>> +     i2c_del_driver(&max77693_i2c_driver);
>> +}
>> +module_exit(max77693_i2c_exit);
> You could use module_i2c_driver() here.
>
> Cheers,
> Samuel.
>
> --
> Intel Open Source Technology Centre
> http://oss.intel.com/
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/