[tip:x86/trampoline] x86, realmode: Move ACPI wakeup to unified realmode code
From: tip-bot for Jarkko Sakkinen
Date: Tue May 08 2012 - 18:18:36 EST
Commit-ID: c9b77ccb52a5c77233b0e557b7d4417b00ef4012
Gitweb: http://git.kernel.org/tip/c9b77ccb52a5c77233b0e557b7d4417b00ef4012
Author: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxx>
AuthorDate: Tue, 8 May 2012 21:22:29 +0300
Committer: H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
CommitDate: Tue, 8 May 2012 11:46:05 -0700
x86, realmode: Move ACPI wakeup to unified realmode code
Migrated ACPI wakeup code to the real-mode blob.
Code existing in .x86_trampoline can be completely
removed. Static descriptor table in wakeup_asm.S is
courtesy of H. Peter Anvin.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxx>
Link: http://lkml.kernel.org/r/1336501366-28617-7-git-send-email-jarkko.sakkinen@xxxxxxxxx
Cc: Rafael J. Wysocki <rjw@xxxxxxx>
Cc: Len Brown <len.brown@xxxxxxxxx>
Signed-off-by: H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
---
arch/x86/include/asm/acpi.h | 2 -
arch/x86/include/asm/realmode.h | 4 +
arch/x86/include/asm/trampoline.h | 39 -----
arch/x86/kernel/Makefile | 1 -
arch/x86/kernel/acpi/Makefile | 9 +-
arch/x86/kernel/acpi/realmode/Makefile | 59 -------
arch/x86/kernel/acpi/realmode/wakeup.lds.S | 62 -------
arch/x86/kernel/acpi/sleep.c | 33 +----
arch/x86/kernel/acpi/sleep.h | 2 +-
arch/x86/kernel/acpi/wakeup_rm.S | 12 --
arch/x86/kernel/head32.c | 1 -
arch/x86/kernel/head64.c | 1 -
arch/x86/kernel/mpparse.c | 1 -
arch/x86/kernel/setup.c | 2 -
arch/x86/kernel/tboot.c | 5 +-
arch/x86/kernel/trampoline.c | 42 -----
arch/x86/kernel/trampoline_32.S | 83 ----------
arch/x86/kernel/trampoline_64.S | 171 --------------------
arch/x86/kernel/vmlinux.lds.S | 12 --
arch/x86/realmode/rm/Makefile | 4 +
arch/x86/realmode/rm/header.S | 5 +
arch/x86/realmode/rm/realmode.lds.S | 4 +
.../realmode => realmode/rm/wakeup}/.gitignore | 0
arch/x86/realmode/rm/wakeup/Makefile | 33 ++++
.../realmode => realmode/rm/wakeup}/bioscall.S | 0
.../acpi/realmode => realmode/rm/wakeup}/copy.S | 0
.../acpi/realmode => realmode/rm/wakeup}/regs.c | 0
.../realmode => realmode/rm/wakeup}/video-bios.c | 0
.../realmode => realmode/rm/wakeup}/video-mode.c | 0
.../realmode => realmode/rm/wakeup}/video-vesa.c | 0
.../realmode => realmode/rm/wakeup}/video-vga.c | 0
.../realmode => realmode/rm/wakeup}/wakemain.c | 3 +-
.../acpi/realmode => realmode/rm/wakeup}/wakeup.h | 9 +-
.../wakeup.S => realmode/rm/wakeup/wakeup_asm.S} | 69 +++++---
drivers/acpi/sleep.c | 8 +-
35 files changed, 111 insertions(+), 565 deletions(-)
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 610001d..724aa44 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -29,7 +29,6 @@
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/mpspec.h>
-#include <asm/trampoline.h>
#define COMPILER_DEPENDENT_INT64 long long
#define COMPILER_DEPENDENT_UINT64 unsigned long long
@@ -118,7 +117,6 @@ static inline void acpi_disable_pci(void)
extern int acpi_suspend_lowlevel(void);
extern const unsigned char acpi_wakeup_code[];
-#define acpi_wakeup_address (__pa(TRAMPOLINE_SYM(acpi_wakeup_code)))
/* early initialization routine */
extern void acpi_reserve_wakeup_memory(void);
diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index 9b4a5da..1bfc74d 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -24,6 +24,10 @@ struct real_mode_header {
u32 level3_ident_pgt;
u32 level3_kernel_pgt;
#endif
+#ifdef CONFIG_ACPI_SLEEP
+ u32 wakeup_start;
+ u32 wakeup_header;
+#endif
} __attribute__((__packed__));
extern struct real_mode_header real_mode_header;
diff --git a/arch/x86/include/asm/trampoline.h b/arch/x86/include/asm/trampoline.h
deleted file mode 100644
index feca311..0000000
--- a/arch/x86/include/asm/trampoline.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef _ASM_X86_TRAMPOLINE_H
-#define _ASM_X86_TRAMPOLINE_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <asm/io.h>
-
-/*
- * Trampoline 80x86 program as an array. These are in the init rodata
- * segment, but that's okay, because we only care about the relative
- * addresses of the symbols.
- */
-extern const unsigned char x86_trampoline_start [];
-extern const unsigned char x86_trampoline_end [];
-extern unsigned char *x86_trampoline_base;
-
-extern unsigned long init_rsp;
-extern unsigned long initial_code;
-extern unsigned long initial_gs;
-
-extern void __init setup_trampolines(void);
-
-extern const unsigned char trampoline_data[];
-extern const unsigned char trampoline_status[];
-
-#define TRAMPOLINE_SYM(x) \
- ((void *)(x86_trampoline_base + \
- ((const unsigned char *)(x) - x86_trampoline_start)))
-
-/* Address of the SMP trampoline */
-static inline unsigned long trampoline_address(void)
-{
- return virt_to_phys(TRAMPOLINE_SYM(trampoline_data));
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_X86_TRAMPOLINE_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index b71ef35..4a20f44 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -35,7 +35,6 @@ obj-y += tsc.o io_delay.o rtc.o
obj-y += pci-iommu_table.o
obj-y += resource.o
-obj-y += trampoline.o trampoline_$(BITS).o
obj-y += realmode.o
obj-y += process.o
obj-y += i387.o xsave.o
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
index 6f35260..163b225 100644
--- a/arch/x86/kernel/acpi/Makefile
+++ b/arch/x86/kernel/acpi/Makefile
@@ -1,14 +1,7 @@
-subdir- := realmode
-
obj-$(CONFIG_ACPI) += boot.o
-obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_rm.o wakeup_$(BITS).o
+obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_$(BITS).o
ifneq ($(CONFIG_ACPI_PROCESSOR),)
obj-y += cstate.o
endif
-$(obj)/wakeup_rm.o: $(obj)/realmode/wakeup.bin
-
-$(obj)/realmode/wakeup.bin: FORCE
- $(Q)$(MAKE) $(build)=$(obj)/realmode
-
diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile
deleted file mode 100644
index 6a564ac..0000000
--- a/arch/x86/kernel/acpi/realmode/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# arch/x86/kernel/acpi/realmode/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-always := wakeup.bin
-targets := wakeup.elf wakeup.lds
-
-wakeup-y += wakeup.o wakemain.o video-mode.o copy.o bioscall.o regs.o
-
-# The link order of the video-*.o modules can matter. In particular,
-# video-vga.o *must* be listed first, followed by video-vesa.o.
-# Hardware-specific drivers should follow in the order they should be
-# probed, and video-bios.o should typically be last.
-wakeup-y += video-vga.o
-wakeup-y += video-vesa.o
-wakeup-y += video-bios.o
-
-targets += $(wakeup-y)
-
-bootsrc := $(src)/../../../boot
-
-# ---------------------------------------------------------------------------
-
-# How to compile the 16-bit code. Note we always compile for -march=i386,
-# that way we can complain to the user if the CPU is insufficient.
-# Compile with _SETUP since this is similar to the boot-time setup code.
-KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \
- -I$(srctree)/$(bootsrc) \
- $(cflags-y) \
- -Wall -Wstrict-prototypes \
- -march=i386 -mregparm=3 \
- -include $(srctree)/$(bootsrc)/code16gcc.h \
- -fno-strict-aliasing -fomit-frame-pointer \
- $(call cc-option, -ffreestanding) \
- $(call cc-option, -fno-toplevel-reorder,\
- $(call cc-option, -fno-unit-at-a-time)) \
- $(call cc-option, -fno-stack-protector) \
- $(call cc-option, -mpreferred-stack-boundary=2)
-KBUILD_CFLAGS += $(call cc-option, -m32)
-KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
-GCOV_PROFILE := n
-
-WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y))
-
-LDFLAGS_wakeup.elf := -T
-
-CPPFLAGS_wakeup.lds += -P -C
-
-$(obj)/wakeup.elf: $(obj)/wakeup.lds $(WAKEUP_OBJS) FORCE
- $(call if_changed,ld)
-
-OBJCOPYFLAGS_wakeup.bin := -O binary
-
-$(obj)/wakeup.bin: $(obj)/wakeup.elf FORCE
- $(call if_changed,objcopy)
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
deleted file mode 100644
index d4f8010..0000000
--- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * wakeup.ld
- *
- * Linker script for the real-mode wakeup code
- */
-#undef i386
-#include "wakeup.h"
-
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(_start)
-
-SECTIONS
-{
- . = 0;
- .jump : {
- *(.jump)
- } = 0x90909090
-
- . = WAKEUP_HEADER_OFFSET;
- .header : {
- *(.header)
- }
-
- . = ALIGN(16);
- .text : {
- *(.text*)
- } = 0x90909090
-
- . = ALIGN(16);
- .rodata : {
- *(.rodata*)
- }
-
- .videocards : {
- video_cards = .;
- *(.videocards)
- video_cards_end = .;
- }
-
- . = ALIGN(16);
- .data : {
- *(.data*)
- }
-
- . = ALIGN(16);
- .bss : {
- __bss_start = .;
- *(.bss)
- __bss_end = .;
- }
-
- .signature : {
- *(.signature)
- }
-
- _end = .;
-
- /DISCARD/ : {
- *(.note*)
- }
-}
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 146a49c..d941b62 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -14,8 +14,9 @@
#include <asm/desc.h>
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
+#include <asm/realmode.h>
-#include "realmode/wakeup.h"
+#include "../../realmode/rm/wakeup/wakeup.h"
#include "sleep.h"
unsigned long acpi_realmode_flags;
@@ -36,13 +37,9 @@ asmlinkage void acpi_enter_s3(void)
*/
int acpi_suspend_lowlevel(void)
{
- struct wakeup_header *header;
- /* address in low memory of the wakeup routine. */
- char *acpi_realmode;
+ struct wakeup_header *header =
+ (struct wakeup_header *) __va(real_mode_header.wakeup_header);
- acpi_realmode = TRAMPOLINE_SYM(acpi_wakeup_code);
-
- header = (struct wakeup_header *)(acpi_realmode + WAKEUP_HEADER_OFFSET);
if (header->signature != WAKEUP_HEADER_SIGNATURE) {
printk(KERN_ERR "wakeup header does not match\n");
return -EINVAL;
@@ -50,27 +47,6 @@ int acpi_suspend_lowlevel(void)
header->video_mode = saved_video_mode;
- header->wakeup_jmp_seg = acpi_wakeup_address >> 4;
-
- /*
- * Set up the wakeup GDT. We set these up as Big Real Mode,
- * that is, with limits set to 4 GB. At least the Lenovo
- * Thinkpad X61 is known to need this for the video BIOS
- * initialization quirk to work; this is likely to also
- * be the case for other laptops or integrated video devices.
- */
-
- /* GDT[0]: GDT self-pointer */
- header->wakeup_gdt[0] =
- (u64)(sizeof(header->wakeup_gdt) - 1) +
- ((u64)__pa(&header->wakeup_gdt) << 16);
- /* GDT[1]: big real mode-like code segment */
- header->wakeup_gdt[1] =
- GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff);
- /* GDT[2]: big real mode-like data segment */
- header->wakeup_gdt[2] =
- GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff);
-
#ifndef CONFIG_64BIT
store_gdt((struct desc_ptr *)&header->pmode_gdt);
@@ -95,7 +71,6 @@ int acpi_suspend_lowlevel(void)
header->pmode_cr3 = (u32)__pa(&initial_page_table);
saved_magic = 0x12345678;
#else /* CONFIG_64BIT */
- header->trampoline_segment = trampoline_address() >> 4;
#ifdef CONFIG_SMP
stack_start = (unsigned long)temp_stack + sizeof(temp_stack);
early_gdt_descr.address =
diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
index d68677a..5653a57 100644
--- a/arch/x86/kernel/acpi/sleep.h
+++ b/arch/x86/kernel/acpi/sleep.h
@@ -2,8 +2,8 @@
* Variables and functions used by the code in sleep.c
*/
-#include <asm/trampoline.h>
#include <linux/linkage.h>
+#include <asm/realmode.h>
extern unsigned long saved_video_mode;
extern long saved_magic;
diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S
deleted file mode 100644
index 63b8ab5..0000000
--- a/arch/x86/kernel/acpi/wakeup_rm.S
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Wrapper script for the realmode binary as a transport object
- * before copying to low memory.
- */
-#include <asm/page_types.h>
-
- .section ".x86_trampoline","a"
- .balign PAGE_SIZE
- .globl acpi_wakeup_code
-acpi_wakeup_code:
- .incbin "arch/x86/kernel/acpi/realmode/wakeup.bin"
- .size acpi_wakeup_code, .-acpi_wakeup_code
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 51ff186..c18f59d 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -14,7 +14,6 @@
#include <asm/sections.h>
#include <asm/e820.h>
#include <asm/page.h>
-#include <asm/trampoline.h>
#include <asm/apic.h>
#include <asm/io_apic.h>
#include <asm/bios_ebda.h>
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 3a3b779..037df57 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -24,7 +24,6 @@
#include <asm/sections.h>
#include <asm/kdebug.h>
#include <asm/e820.h>
-#include <asm/trampoline.h>
#include <asm/bios_ebda.h>
static void __init zap_identity_mappings(void)
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index ca470e4..f44d311 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -27,7 +27,6 @@
#include <asm/proto.h>
#include <asm/bios_ebda.h>
#include <asm/e820.h>
-#include <asm/trampoline.h>
#include <asm/setup.h>
#include <asm/smp.h>
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 56e4124..7a14fec 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -73,7 +73,6 @@
#include <asm/mtrr.h>
#include <asm/apic.h>
-#include <asm/trampoline.h>
#include <asm/realmode.h>
#include <asm/e820.h>
#include <asm/mpspec.h>
@@ -918,7 +917,6 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n",
max_pfn_mapped<<PAGE_SHIFT);
- setup_trampolines();
setup_real_mode();
init_gbpages();
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index 6410744..c136e23 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -32,7 +32,7 @@
#include <linux/mm.h>
#include <linux/tboot.h>
-#include <asm/trampoline.h>
+#include <asm/realmode.h>
#include <asm/processor.h>
#include <asm/bootparam.h>
#include <asm/pgtable.h>
@@ -201,7 +201,8 @@ static int tboot_setup_sleep(void)
add_mac_region(e820.map[i].addr, e820.map[i].size);
}
- tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address;
+ tboot->acpi_sinfo.kernel_s3_resume_vector =
+ real_mode_header.wakeup_start;
return 0;
}
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
deleted file mode 100644
index a73b610..0000000
--- a/arch/x86/kernel/trampoline.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include <linux/io.h>
-#include <linux/memblock.h>
-
-#include <asm/trampoline.h>
-#include <asm/cacheflush.h>
-#include <asm/pgtable.h>
-
-unsigned char *x86_trampoline_base;
-
-void __init setup_trampolines(void)
-{
- phys_addr_t mem;
- size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start);
-
- /* Has to be in very low memory so we can execute real-mode AP code. */
- mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE);
- if (!mem)
- panic("Cannot allocate trampoline\n");
-
- x86_trampoline_base = __va(mem);
- memblock_reserve(mem, size);
-
- printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n",
- x86_trampoline_base, (unsigned long long)mem, size);
-
- memcpy(x86_trampoline_base, x86_trampoline_start, size);
-}
-
-/*
- * setup_trampolines() gets called very early, to guarantee the
- * availability of low memory. This is before the proper kernel page
- * tables are set up, so we cannot set page permissions in that
- * function. Thus, we use an arch_initcall instead.
- */
-static int __init configure_trampolines(void)
-{
- size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start);
-
- set_memory_x((unsigned long)x86_trampoline_base, size >> PAGE_SHIFT);
- return 0;
-}
-arch_initcall(configure_trampolines);
diff --git a/arch/x86/kernel/trampoline_32.S b/arch/x86/kernel/trampoline_32.S
deleted file mode 100644
index 451c0a7..0000000
--- a/arch/x86/kernel/trampoline_32.S
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *
- * Trampoline.S Derived from Setup.S by Linus Torvalds
- *
- * 4 Jan 1997 Michael Chastain: changed to gnu as.
- *
- * This is only used for booting secondary CPUs in SMP machine
- *
- * Entry: CS:IP point to the start of our code, we are
- * in real mode with no stack, but the rest of the
- * trampoline page to make our stack and everything else
- * is a mystery.
- *
- * We jump into arch/x86/kernel/head_32.S.
- *
- * On entry to trampoline_data, the processor is in real mode
- * with 16-bit addressing and 16-bit data. CS has some value
- * and IP is zero. Thus, data addresses need to be absolute
- * (no relocation) and are taken with regard to r_base.
- *
- * If you work on this file, check the object module with
- * objdump --reloc to make sure there are no relocation
- * entries except for:
- *
- * TYPE VALUE
- * R_386_32 startup_32_smp
- * R_386_32 boot_gdt
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/segment.h>
-#include <asm/page_types.h>
-
-#ifdef CONFIG_SMP
-
- .section ".x86_trampoline","a"
- .balign PAGE_SIZE
- .code16
-
-ENTRY(trampoline_data)
-r_base = .
- wbinvd # Needed for NUMA-Q should be harmless for others
- mov %cs, %ax # Code and data in the same place
- mov %ax, %ds
-
- cli # We should be safe anyway
-
- movl $0xA5A5A5A5, trampoline_status - r_base
- # write marker for master knows we're running
-
- /* GDT tables in non default location kernel can be beyond 16MB and
- * lgdt will not be able to load the address as in real mode default
- * operand size is 16bit. Use lgdtl instead to force operand size
- * to 32 bit.
- */
-
- lidtl boot_idt_descr - r_base # load idt with 0, 0
- lgdtl boot_gdt_descr - r_base # load gdt with whatever is appropriate
-
- xor %ax, %ax
- inc %ax # protected mode (PE) bit
- lmsw %ax # into protected mode
- # flush prefetch and jump to startup_32_smp in arch/i386/kernel/head.S
- ljmpl $__BOOT_CS, $(startup_32_smp-__PAGE_OFFSET)
-
- # These need to be in the same 64K segment as the above;
- # hence we don't use the boot_gdt_descr defined in head.S
-boot_gdt_descr:
- .word __BOOT_DS + 7 # gdt limit
- .long boot_gdt - __PAGE_OFFSET # gdt base
-
-boot_idt_descr:
- .word 0 # idt limit = 0
- .long 0 # idt base = 0L
-
-ENTRY(trampoline_status)
- .long 0
-
-.globl trampoline_end
-trampoline_end:
-
-#endif /* CONFIG_SMP */
diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S
deleted file mode 100644
index 09ff517..0000000
--- a/arch/x86/kernel/trampoline_64.S
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- *
- * Trampoline.S Derived from Setup.S by Linus Torvalds
- *
- * 4 Jan 1997 Michael Chastain: changed to gnu as.
- * 15 Sept 2005 Eric Biederman: 64bit PIC support
- *
- * Entry: CS:IP point to the start of our code, we are
- * in real mode with no stack, but the rest of the
- * trampoline page to make our stack and everything else
- * is a mystery.
- *
- * On entry to trampoline_data, the processor is in real mode
- * with 16-bit addressing and 16-bit data. CS has some value
- * and IP is zero. Thus, data addresses need to be absolute
- * (no relocation) and are taken with regard to r_base.
- *
- * With the addition of trampoline_level4_pgt this code can
- * now enter a 64bit kernel that lives at arbitrary 64bit
- * physical addresses.
- *
- * If you work on this file, check the object module with objdump
- * --full-contents --reloc to make sure there are no relocation
- * entries.
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/pgtable_types.h>
-#include <asm/page_types.h>
-#include <asm/msr.h>
-#include <asm/segment.h>
-#include <asm/processor-flags.h>
-
- .section ".x86_trampoline","a"
- .balign PAGE_SIZE
- .code16
-
-ENTRY(trampoline_data)
-r_base = .
- cli # We should be safe anyway
- wbinvd
- mov %cs, %ax # Code and data in the same place
- mov %ax, %ds
- mov %ax, %es
- mov %ax, %ss
-
-
- movl $0xA5A5A5A5, trampoline_status - r_base
- # write marker for master knows we're running
-
- # Setup stack
- movw $(trampoline_stack_end - r_base), %sp
-
- call verify_cpu # Verify the cpu supports long mode
- testl %eax, %eax # Check for return code
- jnz no_longmode
-
- mov %cs, %ax
- movzx %ax, %esi # Find the 32bit trampoline location
- shll $4, %esi
-
- # Fixup the absolute vectors
- leal (startup_32 - r_base)(%esi), %eax
- movl %eax, startup_32_vector - r_base
- leal (startup_64 - r_base)(%esi), %eax
- movl %eax, startup_64_vector - r_base
- leal (tgdt - r_base)(%esi), %eax
- movl %eax, (tgdt + 2 - r_base)
-
- /*
- * GDT tables in non default location kernel can be beyond 16MB and
- * lgdt will not be able to load the address as in real mode default
- * operand size is 16bit. Use lgdtl instead to force operand size
- * to 32 bit.
- */
-
- lidtl tidt - r_base # load idt with 0, 0
- lgdtl tgdt - r_base # load gdt with whatever is appropriate
-
- mov $X86_CR0_PE, %ax # protected mode (PE) bit
- lmsw %ax # into protected mode
-
- # flush prefetch and jump to startup_32
- ljmpl *(startup_32_vector - r_base)
-
- .code32
- .balign 4
-startup_32:
- movl $__KERNEL_DS, %eax # Initialize the %ds segment register
- movl %eax, %ds
-
- movl $X86_CR4_PAE, %eax
- movl %eax, %cr4 # Enable PAE mode
-
- # Setup trampoline 4 level pagetables
- leal (trampoline_level4_pgt - r_base)(%esi), %eax
- movl %eax, %cr3
-
- movl $MSR_EFER, %ecx
- movl $(1 << _EFER_LME), %eax # Enable Long Mode
- xorl %edx, %edx
- wrmsr
-
- # Enable paging and in turn activate Long Mode
- # Enable protected mode
- movl $(X86_CR0_PG | X86_CR0_PE), %eax
- movl %eax, %cr0
-
- /*
- * At this point we're in long mode but in 32bit compatibility mode
- * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
- * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
- * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
- */
- ljmp *(startup_64_vector - r_base)(%esi)
-
- .code64
- .balign 4
-startup_64:
- # Now jump into the kernel using virtual addresses
- movq $secondary_startup_64, %rax
- jmp *%rax
-
- .code16
-no_longmode:
- hlt
- jmp no_longmode
-#include "verify_cpu.S"
-
- .balign 4
- # Careful these need to be in the same 64K segment as the above;
-tidt:
- .word 0 # idt limit = 0
- .word 0, 0 # idt base = 0L
-
- # Duplicate the global descriptor table
- # so the kernel can live anywhere
- .balign 4
-tgdt:
- .short tgdt_end - tgdt # gdt limit
- .long tgdt - r_base
- .short 0
- .quad 0x00cf9b000000ffff # __KERNEL32_CS
- .quad 0x00af9b000000ffff # __KERNEL_CS
- .quad 0x00cf93000000ffff # __KERNEL_DS
-tgdt_end:
-
- .balign 4
-startup_32_vector:
- .long startup_32 - r_base
- .word __KERNEL32_CS, 0
-
- .balign 4
-startup_64_vector:
- .long startup_64 - r_base
- .word __KERNEL_CS, 0
-
- .balign 4
-ENTRY(trampoline_status)
- .long 0
-
-trampoline_stack:
- .org 0x1000
-trampoline_stack_end:
-ENTRY(trampoline_level4_pgt)
- .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
- .fill 510,8,0
- .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
-
-ENTRY(trampoline_end)
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 0f703f1..22a1530 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -197,18 +197,6 @@ SECTIONS
INIT_DATA_SECTION(16)
- /*
- * Code and data for a variety of lowlevel trampolines, to be
- * copied into base memory (< 1 MiB) during initialization.
- * Since it is copied early, the main copy can be discarded
- * afterwards.
- */
- .x86_trampoline : AT(ADDR(.x86_trampoline) - LOAD_OFFSET) {
- x86_trampoline_start = .;
- *(.x86_trampoline)
- x86_trampoline_end = .;
- }
-
.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
__x86_cpu_dev_start = .;
*(.x86_cpu_dev.init)
diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile
index 56ec64f..2432acb 100644
--- a/arch/x86/realmode/rm/Makefile
+++ b/arch/x86/realmode/rm/Makefile
@@ -14,9 +14,13 @@ always := realmode.bin
realmode-y += header.o
realmode-$(CONFIG_X86_32) += reboot_32.o
realmode-y += trampoline_$(BITS).o
+realmode-$(CONFIG_ACPI_SLEEP) += wakeup/wakeup.o
targets += $(realmode-y)
+$(obj)/wakeup/wakeup.o: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/wakeup $@
+
REALMODE_OBJS = $(addprefix $(obj)/,$(realmode-y))
sed-pasyms := -n -r -e 's/^([0-9a-fA-F]+) [ABCDGRSTVW] (.+)$$/pa_\2 = \2;/p'
diff --git a/arch/x86/realmode/rm/header.S b/arch/x86/realmode/rm/header.S
index a979004..730b131 100644
--- a/arch/x86/realmode/rm/header.S
+++ b/arch/x86/realmode/rm/header.S
@@ -27,4 +27,9 @@ ENTRY(real_mode_header)
.long pa_level3_ident_pgt
.long pa_level3_kernel_pgt
#endif
+ /* ACPI sleep */
+#ifdef CONFIG_ACPI_SLEEP
+ .long pa_wakeup_start
+ .long pa_wakeup_header
+#endif
END(real_mode_header)
diff --git a/arch/x86/realmode/rm/realmode.lds.S b/arch/x86/realmode/rm/realmode.lds.S
index c5b8a4f..91b83ea 100644
--- a/arch/x86/realmode/rm/realmode.lds.S
+++ b/arch/x86/realmode/rm/realmode.lds.S
@@ -25,6 +25,10 @@ SECTIONS
.rodata : {
*(.rodata)
*(.rodata.*)
+ . = ALIGN(16);
+ video_cards = .;
+ *(.videocards)
+ video_cards_end = .;
}
. = ALIGN(PAGE_SIZE);
diff --git a/arch/x86/kernel/acpi/realmode/.gitignore b/arch/x86/realmode/rm/wakeup/.gitignore
similarity index 100%
rename from arch/x86/kernel/acpi/realmode/.gitignore
rename to arch/x86/realmode/rm/wakeup/.gitignore
diff --git a/arch/x86/realmode/rm/wakeup/Makefile b/arch/x86/realmode/rm/wakeup/Makefile
new file mode 100644
index 0000000..4c85332
--- /dev/null
+++ b/arch/x86/realmode/rm/wakeup/Makefile
@@ -0,0 +1,33 @@
+#
+# arch/x86/kernel/acpi/realmode/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+always := wakeup.o
+
+wakeup-y += wakeup_asm.o wakemain.o video-mode.o
+wakeup-y += copy.o bioscall.o regs.o
+
+# The link order of the video-*.o modules can matter. In particular,
+# video-vga.o *must* be listed first, followed by video-vesa.o.
+# Hardware-specific drivers should follow in the order they should be
+# probed, and video-bios.o should typically be last.
+wakeup-y += video-vga.o
+wakeup-y += video-vesa.o
+wakeup-y += video-bios.o
+
+targets += $(wakeup-y)
+
+WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y))
+
+LDFLAGS_wakeup.o := -m elf_i386 -r
+$(obj)/wakeup.o: $(WAKEUP_OBJS) FORCE
+ $(call if_changed,ld)
+
+bootsrc := $(src)/../../../boot
+
+ccflags-y += -D_WAKEUP -I$(srctree)/$(bootsrc)
+asflags-y += -D_WAKEUP -I$(srctree)/$(bootsrc)
diff --git a/arch/x86/kernel/acpi/realmode/bioscall.S b/arch/x86/realmode/rm/wakeup/bioscall.S
similarity index 100%
rename from arch/x86/kernel/acpi/realmode/bioscall.S
rename to arch/x86/realmode/rm/wakeup/bioscall.S
diff --git a/arch/x86/kernel/acpi/realmode/copy.S b/arch/x86/realmode/rm/wakeup/copy.S
similarity index 100%
rename from arch/x86/kernel/acpi/realmode/copy.S
rename to arch/x86/realmode/rm/wakeup/copy.S
diff --git a/arch/x86/kernel/acpi/realmode/regs.c b/arch/x86/realmode/rm/wakeup/regs.c
similarity index 100%
rename from arch/x86/kernel/acpi/realmode/regs.c
rename to arch/x86/realmode/rm/wakeup/regs.c
diff --git a/arch/x86/kernel/acpi/realmode/video-bios.c b/arch/x86/realmode/rm/wakeup/video-bios.c
similarity index 100%
rename from arch/x86/kernel/acpi/realmode/video-bios.c
rename to arch/x86/realmode/rm/wakeup/video-bios.c
diff --git a/arch/x86/kernel/acpi/realmode/video-mode.c b/arch/x86/realmode/rm/wakeup/video-mode.c
similarity index 100%
rename from arch/x86/kernel/acpi/realmode/video-mode.c
rename to arch/x86/realmode/rm/wakeup/video-mode.c
diff --git a/arch/x86/kernel/acpi/realmode/video-vesa.c b/arch/x86/realmode/rm/wakeup/video-vesa.c
similarity index 100%
rename from arch/x86/kernel/acpi/realmode/video-vesa.c
rename to arch/x86/realmode/rm/wakeup/video-vesa.c
diff --git a/arch/x86/kernel/acpi/realmode/video-vga.c b/arch/x86/realmode/rm/wakeup/video-vga.c
similarity index 100%
rename from arch/x86/kernel/acpi/realmode/video-vga.c
rename to arch/x86/realmode/rm/wakeup/video-vga.c
diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/realmode/rm/wakeup/wakemain.c
similarity index 98%
rename from arch/x86/kernel/acpi/realmode/wakemain.c
rename to arch/x86/realmode/rm/wakeup/wakemain.c
index 883962d..91405d5 100644
--- a/arch/x86/kernel/acpi/realmode/wakemain.c
+++ b/arch/x86/realmode/rm/wakeup/wakemain.c
@@ -65,7 +65,8 @@ void main(void)
{
/* Kill machine if structures are wrong */
if (wakeup_header.real_magic != 0x12345678)
- while (1);
+ while (1)
+ ;
if (wakeup_header.realmode_flags & 4)
send_morse("...-");
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/realmode/rm/wakeup/wakeup.h
similarity index 82%
rename from arch/x86/kernel/acpi/realmode/wakeup.h
rename to arch/x86/realmode/rm/wakeup/wakeup.h
index 97a29e1..2dfaf06 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.h
+++ b/arch/x86/realmode/rm/wakeup/wakeup.h
@@ -12,9 +12,8 @@
/* This must match data at wakeup.S */
struct wakeup_header {
u16 video_mode; /* Video mode number */
- u16 _jmp1; /* ljmpl opcode, 32-bit only */
u32 pmode_entry; /* Protected mode resume point, 32-bit only */
- u16 _jmp2; /* CS value, 32-bit only */
+ u16 pmode_cs;
u32 pmode_cr0; /* Protected mode cr0 */
u32 pmode_cr3; /* Protected mode cr3 */
u32 pmode_cr4; /* Protected mode cr4 */
@@ -26,12 +25,6 @@ struct wakeup_header {
u32 pmode_behavior; /* Wakeup routine behavior flags */
u32 realmode_flags;
u32 real_magic;
- u16 trampoline_segment; /* segment with trampoline code, 64-bit only */
- u8 _pad1;
- u8 wakeup_jmp;
- u16 wakeup_jmp_off;
- u16 wakeup_jmp_seg;
- u64 wakeup_gdt[3];
u32 signature; /* To check we have correct structure */
} __attribute__((__packed__));
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/realmode/rm/wakeup/wakeup_asm.S
similarity index 72%
rename from arch/x86/kernel/acpi/realmode/wakeup.S
rename to arch/x86/realmode/rm/wakeup/wakeup_asm.S
index b4fd836..b61126c 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.S
+++ b/arch/x86/realmode/rm/wakeup/wakeup_asm.S
@@ -8,21 +8,15 @@
#include <asm/processor-flags.h>
#include "wakeup.h"
- .code16
- .section ".jump", "ax"
- .globl _start
-_start:
- cli
- jmp wakeup_code
+ .code16
/* This should match the structure in wakeup.h */
- .section ".header", "a"
+ .section ".data", "aw"
.globl wakeup_header
wakeup_header:
video_mode: .short 0 /* Video mode number */
-pmode_return: .byte 0x66, 0xea /* ljmpl */
- .long 0 /* offset goes here */
- .short __KERNEL_CS
+pmode_entry: .long 0
+pmode_cs: .short __KERNEL_CS
pmode_cr0: .long 0 /* Saved %cr0 */
pmode_cr3: .long 0 /* Saved %cr3 */
pmode_cr4: .long 0 /* Saved %cr4 */
@@ -32,19 +26,20 @@ pmode_misc_en: .quad 0 /* Saved MISC_ENABLE MSR */
pmode_behavior: .long 0 /* Wakeup behavior flags */
realmode_flags: .long 0
real_magic: .long 0
-trampoline_segment: .word 0
-_pad1: .byte 0
-wakeup_jmp: .byte 0xea /* ljmpw */
-wakeup_jmp_off: .word 3f
-wakeup_jmp_seg: .word 0
-wakeup_gdt: .quad 0, 0, 0
signature: .long WAKEUP_HEADER_SIGNATURE
+ .size wakeup_header, .-wakeup_header
.text
.code16
-wakeup_code:
+ .globl wakeup_start
+wakeup_start:
+ cli
cld
+ .byte 0xea /* ljmpw */
+ .word 3f
+ .word real_mode_seg
+3:
/* Apparently some dimwit BIOS programmers don't know how to
program a PM to RM transition, and we might end up here with
junk in the data segment descriptor registers. The only way
@@ -54,8 +49,7 @@ wakeup_code:
movl %cr0, %eax
orb $X86_CR0_PE, %al
movl %eax, %cr0
- jmp 1f
-1: ljmpw $8, $2f
+ ljmpw $8, $2f
2:
movw %cx, %ds
movw %cx, %es
@@ -65,7 +59,9 @@ wakeup_code:
andb $~X86_CR0_PE, %al
movl %eax, %cr0
- jmp wakeup_jmp
+ .byte 0xea /* ljmpw */
+ .word 3f
+ .word real_mode_seg
3:
/* Set up segments */
movw %cs, %ax
@@ -130,12 +126,9 @@ wakeup_code:
/* This really couldn't... */
movl pmode_cr0, %eax
movl %eax, %cr0
- jmp pmode_return
+ ljmpl *pmode_entry
#else
- pushw $0
- pushw trampoline_segment
- pushw $0
- lret
+ jmp trampoline_data
#endif
bogus_real_magic:
@@ -143,6 +136,32 @@ bogus_real_magic:
hlt
jmp 1b
+ .section ".rodata","a"
+
+ /*
+ * Set up the wakeup GDT. We set these up as Big Real Mode,
+ * that is, with limits set to 4 GB. At least the Lenovo
+ * Thinkpad X61 is known to need this for the video BIOS
+ * initialization quirk to work; this is likely to also
+ * be the case for other laptops or integrated video devices.
+ */
+
+ .globl wakeup_gdt
+ .balign 16
+wakeup_gdt:
+ .word 3*8-1 /* Self-descriptor */
+ .long pa_wakeup_gdt
+ .word 0
+
+ .word 0xffff /* 16-bit code segment @ real_mode_base */
+ .long 0x9b000000 + pa_real_mode_base
+ .word 0x008f /* big real mode */
+
+ .word 0xffff /* 16-bit data segment @ real_mode_base */
+ .long 0x93000000 + pa_real_mode_base
+ .word 0x008f /* big real mode */
+ .size wakeup_gdt, .-wakeup_gdt
+
.data
.balign 8
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index eb6fd23..e77aa4a 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -25,6 +25,8 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#include <asm/realmode.h>
+
#include "internal.h"
#include "sleep.h"
@@ -91,13 +93,13 @@ static struct notifier_block tts_notifier = {
static int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
+ unsigned long wakeup_pa = real_mode_header.wakeup_start;
/* do we have a wakeup address for S2 and S3? */
if (acpi_state == ACPI_STATE_S3) {
- if (!acpi_wakeup_address) {
+ if (!wakeup_pa)
return -EFAULT;
- }
acpi_set_firmware_waking_vector(
- (acpi_physical_address)acpi_wakeup_address);
+ (acpi_physical_address)wakeup_pa);
}
ACPI_FLUSH_CPU_CACHE();
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/