Re: [PATCH RESEND 1/3] printk: convert byte-buffer to variable-lengthrecord buffer
From: Sasha Levin
Date: Tue May 08 2012 - 09:33:29 EST
On Tue, May 8, 2012 at 1:14 PM, Kay Sievers <kay@xxxxxxxx> wrote:
> On Tue, 2012-05-08 at 10:48 +0200, Sasha Levin wrote:
>> This patch was included in today's linux-next, and it looks like it
>> broke printk on my configuration.
>>
>> It's a bit hard to describe exactly what's wrong, but here are the main points:
>>
>> 1. PRINTK_TIME timing information is gone.
>
> It's always unconditionally recorded now. It looks fine in 'dmesg'
> output, right?
Yup. Is there no intention to show it in the console output though? it
was quite handy there.
>
>> 2. Newline issues. It appears to be adding newlines where it
>> shouldn't.
>
>> parport0: PC-style at 0x378
>> , irq 7
>> [
>> PCSPP
>
> Yeah, we need to make sure, we never merge the (always racy)
> continuation printk() users with (non-racy) non-continuation users.
> Therefore KERN_CONT is required to suppress the newline and to merge the
> content with the earlier non-newline-terminated printk() line.
>
> I 'm sure, I have signed up for the job to fix what's needed here. :)
>
> Patch for parport is below.
>
>> 3. Things are not properly aligned, such as stack traces.
>
> Mind sending the entire output of your 'dmesg', which shows it?
>
> We recently just needed to fix the "<%u>" in the dump, which got
> recognized as syslog prority prefixes. There might be a few more
> KERN_CONT missing ...
The 3rd one actually looks like the KERN_CONT problem now that you've
explained it. You can see it in the 'saved trace' test in the boot
log.
I've attached the boot log which shows several other places with this
issue, if you're ok with it I can try patching those myself.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.0-rc6-next-20120508-sasha-00001-g8de7752-dirty (sasha@ksplice-shell2) (gcc version 4.4.5 (Debian 4.4.5-8) ) #178 SMP PREEMPT Tue May 8 04:27:40 EDT 2012
Command line: init=virt/init console=ttyS0 sched_debug slub_debug=FZPU rw numa=fake=10 root=/dev/vda
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fffcfff] usable
BIOS-e820: [mem 0x000000007fffd000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI 2.4 present.
No AGP bridge found
e820: last_pfn = 0x7fffd max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
found SMP MP-table at [mem 0x000fd5d0-0x000fd5df] mapped at [ffff8800000fd5d0]
init_memory_mapping: [mem 0x00000000-0x7fffcfff]
ACPI: RSDP 00000000000fd3f0 00014 (v00 BOCHS )
ACPI: RSDT 000000007fffd660 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 000000007fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 000000007fffd9b0 02589 (v01 BXPC BXDSDT 00000001 INTL 20100528)
ACPI: FACS 000000007fffff40 00040
ACPI: SSDT 000000007fffd7e0 001C1 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 000000007fffd6e0 0008A (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 000000007fffd6a0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007fffcfff]
Faking node 0 at [mem 0x0000000000000000-0x000000000dffffff] (224MB)
Faking node 1 at [mem 0x000000000e000000-0x000000001bffffff] (224MB)
Faking node 2 at [mem 0x000000001c000000-0x0000000029ffffff] (224MB)
Faking node 3 at [mem 0x000000002a000000-0x0000000035ffffff] (192MB)
Faking node 4 at [mem 0x0000000036000000-0x0000000041ffffff] (192MB)
Faking node 5 at [mem 0x0000000042000000-0x000000004dffffff] (192MB)
Faking node 6 at [mem 0x000000004e000000-0x0000000059ffffff] (192MB)
Faking node 7 at [mem 0x000000005a000000-0x0000000065ffffff] (192MB)
Faking node 8 at [mem 0x0000000066000000-0x0000000071ffffff] (192MB)
Faking node 9 at [mem 0x0000000072000000-0x000000007fffcfff] (223MB)
Initmem setup node 0 [mem 0x00000000-0x0dffffff]
NODE_DATA [mem 0x0dfcf000-0x0dffffff]
Initmem setup node 1 [mem 0x0e000000-0x1bffffff]
NODE_DATA [mem 0x1bfcf000-0x1bffffff]
Initmem setup node 2 [mem 0x1c000000-0x29ffffff]
NODE_DATA [mem 0x29fcf000-0x29ffffff]
Initmem setup node 3 [mem 0x2a000000-0x35ffffff]
NODE_DATA [mem 0x35fcf000-0x35ffffff]
Initmem setup node 4 [mem 0x36000000-0x41ffffff]
NODE_DATA [mem 0x41fcf000-0x41ffffff]
Initmem setup node 5 [mem 0x42000000-0x4dffffff]
NODE_DATA [mem 0x4dfcf000-0x4dffffff]
Initmem setup node 6 [mem 0x4e000000-0x59ffffff]
NODE_DATA [mem 0x59fcf000-0x59ffffff]
Initmem setup node 7 [mem 0x5a000000-0x65ffffff]
NODE_DATA [mem 0x65fcf000-0x65ffffff]
Initmem setup node 8 [mem 0x66000000-0x71ffffff]
NODE_DATA [mem 0x71fcf000-0x71ffffff]
Initmem setup node 9 [mem 0x72000000-0x7fffcfff]
NODE_DATA [mem 0x7ffcb000-0x7fffbfff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:41d7841, boot clock
Zone ranges:
DMA
[mem 0x00010000-0x00ffffff]
DMA32
[mem 0x01000000-0xffffffff]
Normal
empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x0dffffff]
node 1: [mem 0x0e000000-0x1bffffff]
node 2: [mem 0x1c000000-0x29ffffff]
node 3: [mem 0x2a000000-0x35ffffff]
node 4: [mem 0x36000000-0x41ffffff]
node 5: [mem 0x42000000-0x4dffffff]
node 6: [mem 0x4e000000-0x59ffffff]
node 7: [mem 0x5a000000-0x65ffffff]
node 8: [mem 0x66000000-0x71ffffff]
node 9: [mem 0x72000000-0x7fffcfff]
ACPI: PM-Timer IO Port: 0xb008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x80000000-0xfeffbfff] available for PCI devices
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:10
PERCPU: Embedded 475 pages/cpu @ffff88000d800000 s1923672 r0 d21928 u2097152
[0]
0
[1]
1
[2]
2
[3]
3
kvm-clock: cpu 0, msr 0:d9d4841, primary cpu clock
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr d80f0c0
Built 10 zonelists in Node order, mobility grouping on. Total pages: 515973
Policy zone: DMA32
Kernel command line: init=virt/init console=ttyS0 sched_debug slub_debug=FZPU rw numa=fake=10 root=/dev/vda
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 1978372k/2097140k available (30279k kernel code, 460k absent, 118308k reserved, 18880k data, 3380k init)
kmemleak: Kernel memory leak detector disabled
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=10
Preemptible hierarchical RCU implementation.
RCU debugfs-based tracing is enabled.
RCU dyntick-idle grace-period acceleration is enabled.
RCU lockdep checking is enabled.
RCU torture testing starts during boot.
Additional per-CPU info printed with stalls.
NR_IRQS:262400 nr_irqs:712 16
Console: colour VGA+ 80x25
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 6367 kB
per task-struct memory footprint: 2688 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock:
ok |
ok |
ok |
ok |
ok |
ok |
A-B-B-A deadlock:
ok |
ok |
ok |
ok |
ok |
ok |
A-B-B-C-C-A deadlock:
ok |
ok |
ok |
ok |
ok |
ok |
A-B-C-A-B-C deadlock:
ok |
ok |
ok |
ok |
ok |
ok |
A-B-B-C-C-D-D-A deadlock:
ok |
ok |
ok |
ok |
ok |
ok |
A-B-C-D-B-D-D-A deadlock:
ok |
ok |
ok |
ok |
ok |
ok |
A-B-C-D-B-C-D-A deadlock:
ok |
ok |
ok |
ok |
ok |
ok |
double unlock:
ok |
ok |
ok |
ok |
ok |
ok |
initialize held:
ok |
ok |
ok |
ok |
ok |
ok |
bad unlock order:
ok |
ok |
ok |
ok |
ok |
ok |
--------------------------------------------------------------------------
recursive read-lock:
|
ok |
|
ok |
recursive read-lock #2:
|
ok |
|
ok |
mixed read-write-lock:
|
ok |
|
ok |
mixed write-read-lock:
|
ok |
|
ok |
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12:
ok |
ok |
ok |
soft-irqs-on + irq-safe-A/12:
ok |
ok |
ok |
hard-irqs-on + irq-safe-A/21:
ok |
ok |
ok |
soft-irqs-on + irq-safe-A/21:
ok |
ok |
ok |
sirq-safe-A => hirqs-on/12:
ok |
ok |
ok |
sirq-safe-A => hirqs-on/21:
ok |
ok |
ok |
hard-safe-A + irqs-on/12:
ok |
ok |
ok |
soft-safe-A + irqs-on/12:
ok |
ok |
ok |
hard-safe-A + irqs-on/21:
ok |
ok |
ok |
soft-safe-A + irqs-on/21:
ok |
ok |
ok |
hard-safe-A + unsafe-B #1/123:
ok |
ok |
ok |
soft-safe-A + unsafe-B #1/123:
ok |
ok |
ok |
hard-safe-A + unsafe-B #1/132:
ok |
ok |
ok |
soft-safe-A + unsafe-B #1/132:
ok |
ok |
ok |
hard-safe-A + unsafe-B #1/213:
ok |
ok |
ok |
soft-safe-A + unsafe-B #1/213:
ok |
ok |
ok |
hard-safe-A + unsafe-B #1/231:
ok |
ok |
ok |
soft-safe-A + unsafe-B #1/231:
ok |
ok |
ok |
hard-safe-A + unsafe-B #1/312:
ok |
ok |
ok |
soft-safe-A + unsafe-B #1/312:
ok |
ok |
ok |
hard-safe-A + unsafe-B #1/321:
ok |
ok |
ok |
soft-safe-A + unsafe-B #1/321:
ok |
ok |
ok |
hard-safe-A + unsafe-B #2/123:
ok |
ok |
ok |
soft-safe-A + unsafe-B #2/123:
ok |
ok |
ok |
hard-safe-A + unsafe-B #2/132:
ok |
ok |
ok |
soft-safe-A + unsafe-B #2/132:
ok |
ok |
ok |
hard-safe-A + unsafe-B #2/213:
ok |
ok |
ok |
soft-safe-A + unsafe-B #2/213:
ok |
ok |
ok |
hard-safe-A + unsafe-B #2/231:
ok |
ok |
ok |
soft-safe-A + unsafe-B #2/231:
ok |
ok |
ok |
hard-safe-A + unsafe-B #2/312:
ok |
ok |
ok |
soft-safe-A + unsafe-B #2/312:
ok |
ok |
ok |
hard-safe-A + unsafe-B #2/321:
ok |
ok |
ok |
soft-safe-A + unsafe-B #2/321:
ok |
ok |
ok |
hard-irq lock-inversion/123:
ok |
ok |
ok |
soft-irq lock-inversion/123:
ok |
ok |
ok |
hard-irq lock-inversion/132:
ok |
ok |
ok |
soft-irq lock-inversion/132:
ok |
ok |
ok |
hard-irq lock-inversion/213:
ok |
ok |
ok |
soft-irq lock-inversion/213:
ok |
ok |
ok |
hard-irq lock-inversion/231:
ok |
ok |
ok |
soft-irq lock-inversion/231:
ok |
ok |
ok |
hard-irq lock-inversion/312:
ok |
ok |
ok |
soft-irq lock-inversion/312:
ok |
ok |
ok |
hard-irq lock-inversion/321:
ok |
ok |
ok |
soft-irq lock-inversion/321:
ok |
ok |
ok |
hard-irq read-recursion/123:
ok |
soft-irq read-recursion/123:
ok |
hard-irq read-recursion/132:
ok |
soft-irq read-recursion/132:
ok |
hard-irq read-recursion/213:
ok |
soft-irq read-recursion/213:
ok |
hard-irq read-recursion/231:
ok |
soft-irq read-recursion/231:
ok |
hard-irq read-recursion/312:
ok |
soft-irq read-recursion/312:
ok |
hard-irq read-recursion/321:
ok |
soft-irq read-recursion/321:
ok |
-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
kmemleak: Early log buffer exceeded (1254), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
Detected 2491.820 MHz processor.
Calibrating delay loop (skipped) preset value.. 4983.64 BogoMIPS (lpj=2491820)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
mce: CPU supports 10 MCE banks
ACPI: Core revision 20120320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz stepping 07
Performance Events: 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled, takes one hw-pmu counter.
lockdep: fixing up alternatives.
Booting Node 1, Processors #1
kvm-clock: cpu 1, msr 0:1b9d4841, secondary cpu clock
KVM setup async PF for cpu 1
kvm-stealtime: cpu 1, msr 1b80f0c0
NMI watchdog: enabled, takes one hw-pmu counter.
lockdep: fixing up alternatives.
Ok.
Booting Node 2, Processors #2
kvm-clock: cpu 2, msr 0:299d4841, secondary cpu clock
KVM setup async PF for cpu 2
kvm-stealtime: cpu 2, msr 2980f0c0
NMI watchdog: enabled, takes one hw-pmu counter.
lockdep: fixing up alternatives.
Ok.
Booting Node 3, Processors #3 Ok.
kvm-clock: cpu 3, msr 0:35bd4841, secondary cpu clock
KVM setup async PF for cpu 3
kvm-stealtime: cpu 3, msr 35a0f0c0
NMI watchdog: enabled, takes one hw-pmu counter.
Brought up 4 CPUs
----------------
| NMI testsuite:
--------------------
remote IPI:
ok |
local IPI:
ok |
--------------------
Good, all 2 testcases passed! |
---------------------------------
Total of 4 processors activated (19934.56 BogoMIPS).
devtmpfs: initialized
initlevel:0=early, 5 registered initcalls
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
initlevel:1=core, 36 registered initcalls
xor: automatically using best checksumming function:
avx : 15648.000 MB/sec
atomic64 test passed for x86-64 platform with CX8 and with SSE
kworker/u:0 (34) used greatest stack depth: 4952 bytes left
kworker/u:0 (36) used greatest stack depth: 4488 bytes left
dummy:
RTC time: 13:27:18, date: 05/08/12
NET: Registered protocol family 16
initlevel:2=postcore, 20 registered initcalls
initlevel:3=arch, 12 registered initcalls
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
initlevel:4=subsys, 96 registered initcalls
bio: create slab <bio-0> at 0
raid6: sse2x1 6890 MB/s
raid6: sse2x2 9812 MB/s
raid6: sse2x4 11179 MB/s
raid6: using algorithm sse2x4 (11179 MB/s)
raid6: using ssse3x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0
S3
S4
S5
)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs
5
*10
11
)
ACPI: PCI Interrupt Link [LNKB] (IRQs
5
*10
11
)
ACPI: PCI Interrupt Link [LNKC] (IRQs
5
10
*11
)
ACPI: PCI Interrupt Link [LNKD] (IRQs
5
10
*11
)
ACPI: PCI Interrupt Link [LNKS] (IRQs
9
)
*0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
PTP clock support registered
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI: Using ACPI for IRQ routing
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
NET: Registered protocol family 23
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
------------[ cut here ]------------
WARNING: at net/wireless/reg.c:396 regulatory_init+0xce/0x144()
Hardware name: Bochs
db.txt is empty, you should update it...
Pid: 1, comm: swapper/0 Not tainted 3.4.0-rc6-next-20120508-sasha-00001-g8de7752-dirty #178
Call Trace:
[<ffffffff810b6ca7>] warn_slowpath_common+0x87/0xb0
[<ffffffff8425fb55>] ? sctp_snmp_proc_init+0x31/0x31
[<ffffffff810b6d71>] warn_slowpath_fmt+0x41/0x50
[<ffffffff8189c208>] ? __raw_spin_lock_init+0x38/0x70
[<ffffffff8425fcf0>] regulatory_init+0xce/0x144
[<ffffffff8425fbba>] cfg80211_init+0x65/0xcd
[<ffffffff841d9639>] do_one_initcall+0x7a/0x155
[<ffffffff841d9807>] do_basic_setup+0xc8/0xed
[<ffffffff841d982c>] ? do_basic_setup+0xed/0xed
[<ffffffff841f7ff7>] ? smp_init+0x85/0x8d
[<ffffffff841d9a85>] kernel_init+0x1fe/0x280
[<ffffffff810e7f0e>] ? sub_preempt_count+0xae/0xf0
[<ffffffff82d8ca74>] kernel_thread_helper+0x4/0x10
[<ffffffff810e884d>] ? finish_task_switch+0x8d/0x110
[<ffffffff82d8ad74>] ? retint_restore_args+0x13/0x13
[<ffffffff841d9887>] ? repair_env_string+0x5b/0x5b
[<ffffffff82d8ca70>] ? gs_change+0x13/0x13
---[ end trace 44593438a59a9533 ]---
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
cfg80211: Calling CRDA to update world regulatory domain
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
initlevel:5=fs, 35 registered initcalls
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 10, 5242880 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 1024 (order: 5, 196608 bytes)
UDP-Lite hash table entries: 1024 (order: 5, 196608 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
initlevel:6=device, 1764 registered initcalls
kvm: no hardware support
has_svm: not amd
kvm: no hardware support
Machine check injector initialized
microcode: CPU0 sig=0x206a7, pf=0x1, revision=0x1
microcode: CPU1 sig=0x206a7, pf=0x1, revision=0x1
microcode: CPU2 sig=0x206a7, pf=0x1, revision=0x1
microcode: CPU3 sig=0x206a7, pf=0x1, revision=0x1
microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
sha1_ssse3: Using AVX optimized SHA-1 implementation
Initializing RT-Tester: OK
====[ backtrace testing ]===========
Testing a backtrace from process context.
The following trace is a kernel self test and not a bug!
Pid: 1, comm: swapper/0 Tainted: G W 3.4.0-rc6-next-20120508-sasha-00001-g8de7752-dirty #178
Call Trace:
[<ffffffff8112a850>] ? backtrace_test_irq_callback+0x20/0x20
[<ffffffff8112a888>] backtrace_regression_test+0x38/0x110
[<ffffffff841f80bf>] ? kallsyms_init+0x25/0x25
[<ffffffff8119c5db>] ? __alloc_percpu+0xb/0x10
[<ffffffff841d9639>] do_one_initcall+0x7a/0x155
[<ffffffff841d9807>] do_basic_setup+0xc8/0xed
[<ffffffff841d982c>] ? do_basic_setup+0xed/0xed
[<ffffffff841f7ff7>] ? smp_init+0x85/0x8d
[<ffffffff841d9a85>] kernel_init+0x1fe/0x280
[<ffffffff810e7f0e>] ? sub_preempt_count+0xae/0xf0
[<ffffffff82d8ca74>] kernel_thread_helper+0x4/0x10
[<ffffffff810e884d>] ? finish_task_switch+0x8d/0x110
[<ffffffff82d8ad74>] ? retint_restore_args+0x13/0x13
[<ffffffff841d9887>] ? repair_env_string+0x5b/0x5b
[<ffffffff82d8ca70>] ? gs_change+0x13/0x13
Testing a backtrace from irq context.
The following trace is a kernel self test and not a bug!
Pid: 16, comm: ksoftirqd/1 Tainted: G W 3.4.0-rc6-next-20120508-sasha-00001-g8de7752-dirty #178
Call Trace:
[<ffffffff8112a839>] backtrace_test_irq_callback+0x9/0x20
[<ffffffff810be141>] tasklet_action+0xb1/0x130
[<ffffffff810be8e8>] __do_softirq+0xc8/0x1c0
[<ffffffff810beadd>] run_ksoftirqd+0xfd/0x230
[<ffffffff810be9e0>] ? __do_softirq+0x1c0/0x1c0
[<ffffffff810dad02>] kthread+0xb2/0xc0
[<ffffffff82d8ca74>] kernel_thread_helper+0x4/0x10
[<ffffffff810e884d>] ? finish_task_switch+0x8d/0x110
[<ffffffff82d8ad74>] ? retint_restore_args+0x13/0x13
[<ffffffff810dac50>] ? __init_kthread_worker+0x70/0x70
[<ffffffff82d8ca70>] ? gs_change+0x13/0x13
Testing a saved backtrace.
The following trace is a kernel self test and not a bug!
[<ffffffff8105d1fa>] save_stack_trace+0x2a/0x50
[<ffffffff8112a934>] backtrace_regression_test+0xe4/0x110
[<ffffffff841d9639>] do_one_initcall+0x7a/0x155
[<ffffffff841d9807>] do_basic_setup+0xc8/0xed
[<ffffffff841d9a85>] kernel_init+0x1fe/0x280
[<ffffffff82d8ca74>] kernel_thread_helper+0x4/0x10
[<ffffffffffffffff>] 0xffffffffffffffff
====[ end of backtrace testing ]====
audit: initializing netlink socket (disabled)
type=2000 audit(1336483646.153:1): initialized
rcu-torture:--- Start of test: nreaders=8 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
DLM installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
NFS: objlayout_init: Registered OSD pNFS Layout Driver
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
FS-Cache: Netfs 'cifs' registered for caching
NTFS driver 2.1.30 [Flags: R/W DEBUG].
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
QNX4 filesystem 0.2.3 registered.
QNX6 filesystem 1.0.0 registered.
fuse init (API version 7.19)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled
9p: Installing v9fs 9p2000 file system support
FS-Cache: Netfs '9p' registered for caching
NILFS version 2 loaded
BeFS version: 0.9.3
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
Btrfs loaded
GFS2 installed
ceph: loaded (mds proto 32)
msgmni has been set to 3864
NET: Registered protocol family 38
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
start plist test
end plist test
crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
crc32: self tests passed, processed 225944 bytes in 171576 nsec
crc32c: CRC_LE_BITS = 64
crc32c: self tests passed, processed 225944 bytes in 87453 nsec
xz_dec_test: module loaded
xz_dec_test: Create a device node with 'mknod xz_dec_test c 248 0' and write .xz files to it.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
cpcihp_generic: not configured, disabling.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
Refined TSC clocksource calibration: 2491.904 MHz.
acpiphp: Slot [31] registered
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
ALI M7101 PMU not found.
INTEL CARILLO RANCH LPC not found.
Carillo Ranch Backlight Driver Initialized.
i2c-core: driver [adp8860_bl] using legacy suspend method
i2c-core: driver [adp8860_bl] using legacy resume method
i2c-core: driver [adp8870_bl] using legacy suspend method
i2c-core: driver [adp8870_bl] using legacy resume method
rivafb_setup START
nvidiafb_setup START
VIA Graphics Integration Chipset framebuffer 2.4 initializing
Could not find Carillo Ranch MCH device.
no IO addresses supplied
hgafb: HGA card not detected.
hgafb: probe of hgafb.0 failed with error -22
cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000
fbcon: CL Picasso4 (fb0) is primary device
Console: switching
to colour frame buffer device 80x30
usbcore: registered new interface driver udlfb
usbcore: registered new interface driver smscufx
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
vga16fb: mapped to 0xffff8800000a0000
fb1: VGA16 VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
ERST DBG: ERST support is disabled.
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
XENFS: not registering filesystem on non-xen platform
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Initializing Nozomi driver 2.1d
lp: driver loaded but no devices found
Non-volatile memory driver v1.3
ppdev: user-space parallel port driver
Linux agpgart interface v0.103
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
IPMI Watchdog: driver initialized
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
ramoops: platform device not found, using module parameters
ramoops: The memory size and the record size must be non-zero
ramoops: probe of ramoops failed with error -22
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
usbcore: registered new interface driver udl
i2c-core: driver [ch7006] using legacy suspend method
i2c-core: driver [ch7006] using legacy resume method
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378
, irq 7
[
PCSPP
,TRISTATE
]
lp0: using parport0 (interrupt-driven).
lp0: console ready
FDC 0 is a S82078B
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
MM: desc_per_page = 128
nbd: registered device at major 43
vda: unknown partition table
'Low Performance USB Block' driver is deprecated. Please switch to usb-storage
usbcore: registered new interface driver ub
drbd: initialized. Version: 8.3.11 (api:88/proto:86-96)
drbd: built-in
drbd: registered as block device major 147
drbd: minor_table @ 0xffff880070805da8
rbd: loaded rbd (rados block device)
mtip32xx Version 1.2.6os3
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
lkdtm: No crash points registered, enable through debugfs
Phantom Linux Driver, version n0.9.8, init OK
i2c-core: driver [apds9802als] using legacy suspend method
i2c-core: driver [apds9802als] using legacy resume method
i2c-core: driver [isl29003] using legacy suspend method
i2c-core: driver [isl29003] using legacy resume method
i2c-core: driver [tsl2550] using legacy suspend method
i2c-core: driver [tsl2550] using legacy resume method
Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
c2port c2port0: C2 port uc added
c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
i2c-core: driver [fsa9480] using legacy suspend method
i2c-core: driver [fsa9480] using legacy resume method
usbcore: registered new interface driver pn533
Uniform Multi-Platform E-IDE driver
piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
piix 0000:00:01.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xc180-0xc187
ide1: BM-DMA at 0xc188-0xc18f
hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
hdc: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-870.
fnic: Cisco FCoE HBA Driver, ver 1.5.0.2
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.10 (Jan 22, 2011)
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.2-0[28900]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
scsi: <fdomain> Detection failed (no card)
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.13-k.
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.30
Copyright(c) 2004-2009 Emulex. All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 3.0.23.0
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012
mpt2sas version 13.100.00.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ppa: Version 2.07 (for Linux 2.4.x)
imm: Version 2.05 (for Linux 2.4.0)
ipr: IBM Power RAID SCSI Device Driver version: 2.5.3 (March 10, 2012)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
VMware PVSCSI driver - version 1.0.2.0-k
hv_vmbus: registering driver hv_storvsc
st: Version 20101219, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
SCSI Media Changer driver v0.25
osd: LOADED open-osd 0.2.1
scsi_debug: host protection
scsi0 : scsi_debug, version 1.82 [20100324], dev_size_mb=8, opts=0x0
scsi 0:0:0:0: Direct-Access Linux scsi_debug 0004 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.38 MB/8.00 MiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi_scan_0 (3479) used greatest stack depth: 3768 bytes left
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
Error: Driver 'pata_platform' is already registered, aborting...
Rounding down aligned max_sectors from 4294967295 to 8388600
SSFDC read-only Flash Translation layer
mtdoops: mtd device (mtddev=name/number) must be supplied
physmap-flash.0: failed to claim resource 0
Generic platform RAM MTD, (c) 2004 Simtec Electronics
slram: not enough parameters.
ftl_cs: FTL header not found.
onenand_wait: timeout! ctrl=0x0000 intr=0x0000
OneNAND 16MB 1.8V 16-bit (0x04)
OneNAND version = 0x001e
Scanning device for bad blocks
Creating 1 MTD partitions on "OneNAND simulator":
0x000000000000-0x000001000000 : "OneNAND simulator partition"
ftl_cs: FTL header not found.
HSI/SSI char device loaded
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
eql: Equalizer2002: Simon Janes (simon@xxxxxxx) and David S. Miller (davem@xxxxxxxxxx)
Micrel KS8995 Ethernet switch SPI driver version 0.1.1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
arcnet loaded.
arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded.
arcnet: raw mode (`r') encapsulation support loaded.
arcnet: cap mode (`c') encapsulation support loaded.
arcnet: COM90xx chipset support
S1: No ARCnet cards found.
arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)
E-mail me if you actually test this driver, please!
arc%d: No autoprobe for IO mapped cards; you must specify the base address!
arcnet: RIM I (entirely mem-mapped) support
E-mail me if you actually test the RIM I driver, please!
Given: node 00h, shmem 0h, irq 0
No autoprobe for RIM I; you must specify the shmem and irq!
arcnet: COM20020 PCI support
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx>
vcan: Virtual CAN interface driver
slcan: serial line CAN interface driver
slcan: 10 dynamic interface channels.
CAN device driver interface
usbcore: registered new interface driver peak_usb
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 3.4.7-k
igb: Copyright (c) 2007-2012 Intel Corporation.
igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.1-k
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
mkiss: AX.25 Multikiss, Hans Albas PE1AYX
AX.25: 6pack driver, Revision: 0.3.0
YAM driver version 0.8 by F1OAT/F6FBB
AX.25: bpqether driver version 004
baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_ser_fdx: version 0.10
hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
hdlcdrv: version 0.8
baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_ser_hdx: version 0.10
baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_par: version 0.9
NET3 PLIP version 2.4-parport gniibe@xxxxxxxxx
plip0: Parallel port at 0x378, using IRQ 7.
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
iwlwifi: Copyright(c) 2003-2012 Intel Corporation
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2011 Intel Corporation
VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_eem
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver sierra_net
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver qmi_wwan
adummy: version 1.0
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.20
Generic UIO driver for PCI 2.3 devices version: 0.01.0
ks0108: ERROR: parport didn't register new device
cfag12864b: ERROR: ks0108 is not initialized
cfag12864bfb: ERROR: cfag12864b is not initialized
aoe: AoE v47 initialised.
paride: aten registered as protocol 0
paride: bpck registered as protocol 1
paride: comm registered as protocol 2
paride: dstr registered as protocol 3
paride: k951 registered as protocol 4
paride: k971 registered as protocol 5
paride: epat registered as protocol 6
paride: epia registered as protocol 7
paride: frpw registered as protocol 8
paride: friq registered as protocol 9
paride: fit2 registered as protocol 10
paride: fit3 registered as protocol 11
paride: on20 registered as protocol 12
paride: on26 registered as protocol 13
paride: ktti registered as protocol 14
pd: pd version 1.05, major 45, cluster 64, nice 0
pda: Autoprobe failed
pd: no valid drive found
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
pf: pf version 1.04, major 47, cluster 64, nice 0
pf: No ATAPI disk detected
pt: pt version 1.04, major 96
pt0: Autoprobe failed
pt: No ATAPI tape drive detected
pg: pg version 1.02, major 97
pga: Autoprobe failed
pg: No ATAPI device detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
usbcore: registered new interface driver synaptics_usb
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
rtc-test rtc-test.0: rtc core: registered test as rtc1
rtc-test rtc-test.1: rtc core: registered test as rtc2
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 232
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
gspca_main: v2.14.0 registered
usbcore: registered new interface driver jl2005bcd
vivi-000: V4L2 device registered as video0
Video Technology Magazine Virtual Video Capture Board ver 0.8.1 successfully loaded.
pps pps0: new PPS source ktimer
pps pps0: ktimer PPS source registered
pps_ldisc: PPS line discipline registered
pps_parport: parallel port PPS client
pps_parport: couldn't register with parport0
Driver for 1-wire Dallas network protocol.
usbcore: registered new interface driver DS9490R
DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
i2c-core: driver [sbs-battery] using legacy suspend method
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx
device-mapper: multipath: version 1.3.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath queue-length: version 0.1.0 loaded
device-mapper: multipath service-time: version 0.2.0 loaded
device-mapper: dm-log-userspace: version 1.1.0 loaded
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: HCIATH3K protocol initialized
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
usbcore: registered new interface driver ath3k
ISDN subsystem Rev: 1.1.2.3/
1.1.2.2/
1.1.2.3/
1.1.2.2/
1.1.2.2
PPP BSD Compression module registered
CAPI 2.0 started up with major 68 (middleware)
Modular ISDN core version 1.1.28
NET: Registered protocol family 34
DSP module 2.0
mISDN_dsp: DSP clocks every 64 samples. This equals 8 jiffies.
mISDN: Layer-1-over-IP driver Rev. 2.00
0 virtual devices registered
dss1_divert module successfully installed
gigaset: Driver for Gigaset 307x (debug build)
gigaset: Kernel CAPI interface
usbcore: registered new interface driver usb_gigaset
usb_gigaset: USB Driver for Gigaset 307x using M105
usbcore: registered new interface driver bas_gigaset
bas_gigaset: USB Driver for Gigaset 307x
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
usbcore: registered new interface driver ushc
sdhci-pltfm: SDHCI platform and OF driver helper
user_mad: couldn't register device number
iscsi: registered transport (iser)
EFI Variables Facility v0.08 2004-May-17
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
No iBFT detected.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver Abilis Systems as10x usb driver
usbip_core: usbip_core_init:814: USB/IP Core v1.0.0
usbcore: registered new interface driver usbip-host
usbip_host: usbip_host_init:270: USB/IP Host Driver v1.0.0
usbcore: registered new interface driver w35und
usbcore: registered new interface driver prism2_usb
usbcore: registered new interface driver asus-oled
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
Panel driver version 0.9.5 registered on parport0 (io=0x378).
usbcore: registered new interface driver r8712u
usbcore: registered new interface driver tranzport
usbcore: registered new interface driver alphatrack
VME User Space Access Driver
vme_user: No cards, skipping registration
zram: num_devices not specified. Using default: 1
zram: Creating 1 devices ...
Loading crystalhd 0.9.27
beceem: Beceem Communications Inc. WiMAX driver, 5.2.45
Copyright 2010. Beceem Communications Inc
usbcore: registered new interface driver usbbcm
usbcore: registered new interface driver ft1000usb
input: Speakup as /devices/virtual/input/input3
initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
speakup 3.1.6: initialized
synth name on entry is: (null)
i2c-core: driver [cptm1217] using legacy suspend method
i2c-core: driver [cptm1217] using legacy resume method
Linux telephony interface: v1.00
ixj driver initialized.
ozwpan ozwpan: Ozmo Devices WPAN
ozwpan ozwpan: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Ozmo Devices WPAN
usb usb1: Manufacturer: Linux 3.4.0-rc6-next-20120508-sasha-00001-g8de7752-dirty Ozmo WPAN
usb usb1: SerialNumber: ozwpan
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
asus_wmi: Asus Management GUID not found
asus_wmi: Management GUID not found
asus_wmi: Management GUID not found
msi_laptop: driver 0.5 successfully loaded
compal_laptop: Motherboard not recognized (You could try the module's force-parameter)
acerhdf: Acer Aspire One Fan driver, v.0.5.26
acerhdf: unknown (unsupported) BIOS version Bochs/Bochs/Bochs, please report, aborting!
hp_accel: driver loaded
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
fujitsu_laptop: driver 0.6.0 successfully loaded
fujitsu_tablet: Unknown (using defaults)
msi_wmi: This machine doesn't have MSI-hotkeys through WMI
topstar_laptop: ACPI extras driver loaded
intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
hv_utils: Registering HyperV Utility Driver
hv_vmbus: registering driver hv_util
Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98
aedsp16: I/O, IRQ and DMA are mandatory
pss: mss_io, mss_dma, mss_irq and pss_io must be set.
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
ad1848: No ISAPnP cards found, trying standard ones...
MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996
I/O, IRQ, DMA and type are mandatory
Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996
I/O, IRQ, DMA and type are mandatory
sb: Init: Starting Probe...
sb: Init: Done
Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc
uart6850: irq and io must be set.
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
MIDI Loopback device driver
ALSA sound/core/seq/oss/seq_oss.c:236 can't register device seq
ALSA sound/core/oss/pcm_oss.c:3009 unable to register OSS PCM device 0:0
no UART detected at 0x1
ALSA sound/drivers/mtpav.c:589 MTVAP port 0x378 is busy
snd_mtpav: probe of snd_mtpav failed with error -16
snd_mts64: probe of snd_mts64.0 failed with error -5
snd_portman2x4: probe of snd_portman2x4.0 failed with error -5
input: PC Speaker as /devices/platform/pcspkr/input/input4
PCSP: CONFIG_DEBUG_PAGEALLOC is enabled, which may make the sound noisy.
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver snd-ua101
usbcore: registered new interface driver snd-usb-usx2y
usbcore: registered new interface driver snd-usb-us122l
usbcore: registered new interface driver snd-usb-caiaq
usbcore: registered new interface driver snd-usb-6fire
oprofile: using NMI interrupt.
pktgen: Packet Generator for packet performance testing. Version: 2.74
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
Performance counters on
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ip_set: protocol 6
IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
IPVS: Creating netns size=3104 id=0
IPVS: ipvs loaded.
IPVS: [rr] scheduler registered.
IPVS: [wrr] scheduler registered.
IPVS: [lc] scheduler registered.
IPVS: [wlc] scheduler registered.
IPVS: [lblc] scheduler registered.
IPVS: [lblcr] scheduler registered.
IPVS: [dh] scheduler registered.
IPVS: [sh] scheduler registered.
IPVS: [sed] scheduler registered.
IPVS: [nq] scheduler registered.
IPVS: ftp: loaded support on port[0] = 21
IPVS: [sip] pe registered.
IPv4 over IPv4 tunneling driver
gre: GRE over IPv4 demultiplexor driver
ip_gre: GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
NET: Registered protocol family 4
NET: Registered protocol family 5
NET: Registered protocol family 9
X.25 for Linux Version 0.2
NET: Registered protocol family 6
NET: Registered protocol family 11
NET: Registered protocol family 3
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
can: netlink gateway (rev 20101209)
IrCOMM protocol (Dag Brattli)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: CMTP (CAPI Emulation) ver 1.0
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered rdma transport module.
NET: Registered protocol family 33
RxRPC: Registered security type 2 'rxkad'
lec:lane_module_init: lec.c: initialized
mpoa:atm_mpoa_init: mpc.c: initialized
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
L2TP IP encapsulation support (L2TPv3)
L2TP netlink interface
L2TP ethernet pseudowire support (L2TPv3)
L2TP debugfs support
L2TP IP encapsulation support for IPv6 (L2TPv3)
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 80Kbytes
NET: Registered protocol family 12
NET: Registered protocol family 19
NET: Registered protocol family 35
8021q: 802.1Q VLAN Support v1.8
DCCP: Activated CCID 2 (TCP-like)
DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
sctp: Hash tables configured (established 26214 bind 26214)
NET: Registered protocol family 21
Registered RDS/iwarp transport
Registered RDS/infiniband transport
Registered RDS/tcp transport
lib80211: common routines for IEEE802.11 drivers
TIPC: Activated (version 2.0.0)
NET: Registered protocol family 30
TIPC: Started in single node mode
9pnet: Installing 9P2000 support
NET: Registered protocol family 37
NET: Registered protocol family 36
Registering the dns_resolver key type
libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
batman_adv: B.A.T.M.A.N. advanced 2012.1.0 (compatibility version 14) loaded
openvswitch: Open vSwitch switching datapath
initlevel:7=late, 60 registered initcalls
registered taskstats version 1
kAFS: Red Hat AFS client v0.1 registering.
FS-Cache: Netfs 'afs' registered for caching
IMA: No TPM chip found, activating TPM-bypass!
raid6test: testing the 4-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
CPA self-test:
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P) OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q) OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P) OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q) OK
4k 524285 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0
raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q) OK
raid6test: testing the 5-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P) OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q) OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P) OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q) OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P) OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q) OK
raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q) OK
raid6test: testing the 11-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
raid6test: test_disks(0, 9): faila= 0(D) failb= 9(P) OK
raid6test: test_disks(0, 10): faila= 0(D) failb= 10(Q) OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
raid6test: test_disks(1, 9): faila= 1(D) failb= 9(P) OK
raid6test: test_disks(1, 10): faila= 1(D) failb= 10(Q) OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
raid6test: test_disks(2, 9): faila= 2(D) failb= 9(P) OK
raid6test: test_disks(2, 10): faila= 2(D) failb= 10(Q) OK
raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
raid6test: test_disks(3, 9): faila= 3(D) failb= 9(P) OK
raid6test: test_disks(3, 10): faila= 3(D) failb= 10(Q) OK
raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
raid6test: test_disks(4, 9): faila= 4(D) failb= 9(P) OK
raid6test: test_disks(4, 10): faila= 4(D) failb= 10(Q) OK
raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
raid6test: test_disks(5, 9): faila= 5(D) failb= 9(P) OK
raid6test: test_disks(5, 10): faila= 5(D) failb= 10(Q) OK
raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
raid6test: test_disks(6, 9): faila= 6(D) failb= 9(P) OK
raid6test: test_disks(6, 10): faila= 6(D) failb= 10(Q) OK
raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
raid6test: test_disks(7, 9): faila= 7(D) failb= 9(P) OK
raid6test: test_disks(7, 10): faila= 7(D) failb= 10(Q) OK
raid6test: test_disks(8, 9): faila= 8(D) failb= 9(P) OK
raid6test: test_disks(8, 10): faila= 8(D) failb= 10(Q) OK
raid6test: test_disks(9, 10): faila= 9(P) failb= 10(Q) OK
raid6test: testing the 12-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK
raid6test: test_disks(0, 10): faila= 0(D) failb= 10(P) OK
raid6test: test_disks(0, 11): faila= 0(D) failb= 11(Q) OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK
raid6test: test_disks(1, 10): faila= 1(D) failb= 10(P) OK
raid6test: test_disks(1, 11): faila= 1(D) failb= 11(Q) OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK
raid6test: test_disks(2, 10): faila= 2(D) failb= 10(P) OK
raid6test: test_disks(2, 11): faila= 2(D) failb= 11(Q) OK
raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK
raid6test: test_disks(3, 10): faila= 3(D) failb= 10(P) OK
raid6test: test_disks(3, 11): faila= 3(D) failb= 11(Q) OK
raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK
raid6test: test_disks(4, 10): faila= 4(D) failb= 10(P) OK
raid6test: test_disks(4, 11): faila= 4(D) failb= 11(Q) OK
raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK
raid6test: test_disks(5, 10): faila= 5(D) failb= 10(P) OK
raid6test: test_disks(5, 11): faila= 5(D) failb= 11(Q) OK
raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK
raid6test: test_disks(6, 10): faila= 6(D) failb= 10(P) OK
raid6test: test_disks(6, 11): faila= 6(D) failb= 11(Q) OK
raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK
raid6test: test_disks(7, 10): faila= 7(D) failb= 10(P) OK
raid6test: test_disks(7, 11): faila= 7(D) failb= 11(Q) OK
raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK
raid6test: test_disks(8, 10): faila= 8(D) failb= 10(P) OK
raid6test: test_disks(8, 11): faila= 8(D) failb= 11(Q) OK
raid6test: test_disks(9, 10): faila= 9(D) failb= 10(P) OK
raid6test: test_disks(9, 11): faila= 9(D) failb= 11(Q) OK
raid6test: test_disks(10, 11): faila= 10(P) failb= 11(Q) OK
raid6test: testing the 16-disk case...
raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK
raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D) OK
raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D) OK
raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D) OK
raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D) OK
raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P) OK
raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q) OK
raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK
raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D) OK
raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D) OK
raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D) OK
raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D) OK
raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P) OK
raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q) OK
raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK
raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D) OK
raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D) OK
raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D) OK
raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D) OK
raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P) OK
raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q) OK
raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK
raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D) OK
raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D) OK
raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D) OK
raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D) OK
raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P) OK
raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q) OK
raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK
raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D) OK
raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D) OK
raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D) OK
raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D) OK
raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P) OK
raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q) OK
raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK
raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D) OK
raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D) OK
raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D) OK
raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D) OK
raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P) OK
raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q) OK
raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK
raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D) OK
raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D) OK
raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D) OK
raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D) OK
raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P) OK
raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q) OK
raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK
raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D) OK
raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D) OK
raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D) OK
raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D) OK
raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P) OK
raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q) OK
raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK
raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D) OK
raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D) OK
raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D) OK
raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D) OK
raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P) OK
raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q) OK
raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D) OK
raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D) OK
raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D) OK
raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D) OK
raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P) OK
raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q) OK
raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D) OK
raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D) OK
raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D) OK
raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P) OK
raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q) OK
raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D) OK
raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D) OK
raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P) OK
raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q) OK
raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D) OK
raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P) OK
raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q) OK
raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P) OK
raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q) OK
raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q) OK
raid6test:
raid6test: complete (257 tests, 0 failures)
Magic number: 12:896:482
sound pcmC0D0c: hash matches
register_blkdev: cannot get major 3 for hd
4k 524285 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0
4k 524285 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0
ok.
console [netcon0] enabled
netconsole: network logging started
rtc_cmos 00:01: setting system clock to 2012-05-08 13:27:56 UTC (1336483676)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
ALSA device list:
#0: Dummy 1
#1: Loopback 1
#2: Virtual MIDI Card 1
#3: Internal PC-Speaker at port 0x61
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs (vda): using internal journal
EXT3-fs (vda): recovery complete
EXT3-fs (vda): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) on device 250:0.
devtmpfs: mounted
debug: unmapping init [mem 0xffffffff84003000-0xffffffff8434ffff]
Write protecting the kernel read-only data: 43008k
Testing CPA: undo ffffffff81000000-ffffffff83a00000
Testing CPA: again
debug: unmapping init [mem 0xffff880002d96000-0xffff880002dfffff]
debug: unmapping init [mem 0xffff8800039e5000-0xffff8800039fffff]
Mounting...
sh-4.2# hrtimer: interrupt took 4472708 ns
xQEMU: Terminated