Re: [PATCH 02/10] atl1c: add PHY link event(up/down) patch

[Florian Fainelli]

Hi Xiong,

Le samedi 28 avril 2012 03:58:37, xiong a écrit :
> On some platforms the PHY settings need to change depending on the
> cable link status to get better stability.
> 
> Signed-off-by: xiong <xiong@xxxxxxxxxxxxxxxx>
> Tested-by: Liu David <dwliu@xxxxxxxxxxxxxxxx>
> ---
>  drivers/net/ethernet/atheros/atl1c/atl1c.h      |    1 +
>  drivers/net/ethernet/atheros/atl1c/atl1c_hw.c   |   37 +++++++++++++++
>  drivers/net/ethernet/atheros/atl1c/atl1c_hw.h   |    1 +
>  drivers/net/ethernet/atheros/atl1c/atl1c_main.c |   55
> +++++++++++++++++++++++ 4 files changed, 94 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c.h
> b/drivers/net/ethernet/atheros/atl1c/atl1c.h index acc2956..b2bf324 100644
> --- a/drivers/net/ethernet/atheros/atl1c/atl1c.h
> +++ b/drivers/net/ethernet/atheros/atl1c/atl1c.h
> @@ -436,6 +436,7 @@ struct atl1c_hw {
>  	bool phy_configured;
>  	bool re_autoneg;
>  	bool emi_ca;
> +	bool msi_lnkpatch;	/* link patch for specific platforms */
>  };
> 
>  /*
> diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
> b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c index 07f017f..209c179
> 100644
> --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
> +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
> @@ -848,3 +848,40 @@ int atl1c_power_saving(struct atl1c_hw *hw, u32 wufc)
> 
>  	return 0;
>  }
> +
> +
> +/* configure phy after Link change Event */
> +void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed)
> +{
> +	u16 phy_val;
> +	bool adj_thresh = false;
> +
> +	if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2 ||
> +	    hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2)
> +		adj_thresh = true;
> +
> +	if (link_speed != SPEED_0) { /* link up */
> +		/* az with brcm, half-amp */
> +		if (hw->nic_type == athr_l1d_2) {
> +			atl1c_read_phy_ext(hw, MIIEXT_PCS, MIIEXT_CLDCTRL6,
> +				&phy_val);
> +			phy_val = FIELD_GETX(phy_val, CLDCTRL6_CAB_LEN);
> +			phy_val = phy_val > CLDCTRL6_CAB_LEN_SHORT ?
> +				AZ_ANADECT_LONG : AZ_ANADECT_DEF;
> +			atl1c_write_phy_dbg(hw, MIIDBG_AZ_ANADECT, phy_val);
> +		}
> +		/* threshold adjust */
> +		if (adj_thresh && link_speed == SPEED_100 && hw->msi_lnkpatch) {
> +			atl1c_write_phy_dbg(hw, MIIDBG_MSE16DB, L1D_MSE16DB_UP);
> +			atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL,
> +				L1D_SYSMODCTRL_IECHOADJ_DEF);
> +		}
> +	} else { /* link down */
> +		if (adj_thresh && hw->msi_lnkpatch) {
> +			atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL,
> +				SYSMODCTRL_IECHOADJ_DEF);
> +			atl1c_write_phy_dbg(hw, MIIDBG_MSE16DB,
> +				L1D_MSE16DB_DOWN);
> +		}
> +	}
> +}
> diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
> b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h index 0adb341..ea3f520
> 100644
> --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
> +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
> @@ -63,6 +63,7 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
>  			u16 reg_addr, u16 phy_data);
>  int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
>  int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data);
> +void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed);
> 
>  /* hw-ids */
>  #define PCI_DEVICE_ID_ATTANSIC_L2C      0x1062
> diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 25b7b00..50df437
> 100644
> --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> @@ -258,6 +258,7 @@ static void atl1c_check_link_status(struct
> atl1c_adapter *adapter) if (netif_msg_hw(adapter))
>  				dev_warn(&pdev->dev, "stop mac failed\n");
>  		atl1c_set_aspm(hw, SPEED_0);
> +		atl1c_post_phy_linkchg(hw, SPEED_0);
>  		netif_carrier_off(netdev);
>  		netif_stop_queue(netdev);
>  	} else {
> @@ -274,6 +275,7 @@ static void atl1c_check_link_status(struct
> atl1c_adapter *adapter) adapter->link_speed  = speed;
>  			adapter->link_duplex = duplex;
>  			atl1c_set_aspm(hw, speed);
> +			atl1c_post_phy_linkchg(hw, speed);
>  			atl1c_start_mac(adapter);
>  			if (netif_msg_link(adapter))
>  				dev_info(&pdev->dev,
> @@ -697,6 +699,57 @@ static int atl1c_setup_mac_funcs(struct atl1c_hw *hw)
>  		hw->link_cap_flags |= ATL1C_LINK_CAP_1000M;
>  	return 0;
>  }
> +
> +struct atl1c_platform_patch {
> +	u16 pci_vid;
> +	u16 pci_did;
> +	u8  pci_revid;
> +	u16 subsystem_vid;
> +	u16 subsystem_did;
> +	u32 patch_flag;
> +#define ATL1C_LINK_PATCH	0x1
> +};
> +static struct atl1c_platform_patch plats[] = {

This should be static const.

> +{0x1969, 0x2060, 0xC1, 0x1019, 0x8152, 0x1},
> +{0x1969, 0x2060, 0xC1, 0x1019, 0x2060, 0x1},
> +{0x1969, 0x2060, 0xC1, 0x1019, 0xE000, 0x1},
> +{0x1969, 0x2062, 0xC0, 0x1019, 0x8152, 0x1},
> +{0x1969, 0x2062, 0xC0, 0x1019, 0x2062, 0x1},
> +{0x1969, 0x2062, 0xC0, 0x1458, 0xE000, 0x1},
> +{0x1969, 0x2062, 0xC1, 0x1019, 0x8152, 0x1},
> +{0x1969, 0x2062, 0xC1, 0x1019, 0x2062, 0x1},
> +{0x1969, 0x2062, 0xC1, 0x1458, 0xE000, 0x1},
> +{0x1969, 0x2062, 0xC1, 0x1565, 0x2802, 0x1},
> +{0x1969, 0x2062, 0xC1, 0x1565, 0x2801, 0x1},
> +{0x1969, 0x1073, 0xC0, 0x1019, 0x8151, 0x1},
> +{0x1969, 0x1073, 0xC0, 0x1019, 0x1073, 0x1},
> +{0x1969, 0x1073, 0xC0, 0x1458, 0xE000, 0x1},
> +{0x1969, 0x1083, 0xC0, 0x1458, 0xE000, 0x1},
> +{0x1969, 0x1083, 0xC0, 0x1019, 0x8151, 0x1},
> +{0x1969, 0x1083, 0xC0, 0x1019, 0x1083, 0x1},
> +{0x1969, 0x1083, 0xC0, 0x1462, 0x7680, 0x1},
> +{0x1969, 0x1083, 0xC0, 0x1565, 0x2803, 0x1},
> +{0},

Since patch_flag is always set to 0x1, just remove it, if you find a matching 
entry, apply the patch. Vendor ID is always the same, remove it as well.

Looking at the supported PCI devices table, this patching table is applicable 
to all Atheros PCI device id and none of the Attansic PCI device id, this 
suggests that your table should be reversed, and you should only list the 
devices *not* needing the patch, this should make the lookup code smaller.

> +};
> +
> +static void __devinit atl1c_patch_assign(struct atl1c_hw *hw)
> +{
> +	int i = 0;
> +
> +	hw->msi_lnkpatch = false;
> +
> +	while (plats[i].pci_vid != 0) {
> +		if (plats[i].pci_vid == hw->vendor_id &&
> +		    plats[i].pci_did == hw->device_id &&
> +		    plats[i].pci_revid == hw->revision_id &&
> +		    plats[i].subsystem_vid == hw->subsystem_vendor_id &&
> +		    plats[i].subsystem_did == hw->subsystem_id) {
> +			if (plats[i].patch_flag & ATL1C_LINK_PATCH)
> +				hw->msi_lnkpatch = true;
> +		}
> +		i++;
> +	}
> +}
>  /*
>   * atl1c_sw_init - Initialize general software structures (struct
> atl1c_adapter) * @adapter: board private structure to initialize
> @@ -732,6 +785,8 @@ static int __devinit atl1c_sw_init(struct atl1c_adapter
> *adapter) dev_err(&pdev->dev, "set mac function pointers failed\n");
>  		return -1;
>  	}
> +	atl1c_patch_assign(hw);
> +
>  	hw->intr_mask = IMR_NORMAL_MASK;
>  	hw->phy_configured = false;
>  	hw->preamble_len = 7;

-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/