Re: x86: runtime waring in pcibios_fwaddrmap_lookup

From: Bjorn Helgaas
Date: Thu Apr 12 2012 - 21:38:59 EST


+ Myron

On Thu, Apr 12, 2012 at 1:41 PM, Meelis Roos <mroos@xxxxxxxx> wrote:
> ------------[ cut here ]------------
> Got this in amd64 PC running 3.4.0-rc2. Full dmesg below.
>
> WARNING: at arch/x86/pci/i386.c:60 pcibios_fwaddrmap_lookup+0x1a/0x3a()
> Hardware name: 939Dual-SATA2
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 3.4.0-rc2 #194
> Call Trace:
>  [<ffffffff81023c0a>] warn_slowpath_common+0x7e/0x96
>  [<ffffffff81023c37>] warn_slowpath_null+0x15/0x17
>  [<ffffffff8121f2b5>] pcibios_fwaddrmap_lookup+0x1a/0x3a
>  [<ffffffff812dd345>] pcibios_save_fw_addr+0x3d/0xcb
>  [<ffffffff8168006d>] pcibios_allocate_resources+0xc8/0x15f
>  [<ffffffff81681109>] ? pci_legacy_init+0x3e/0x3e
>  [<ffffffff8168011b>] pcibios_resource_survey+0x17/0x2d
>  [<ffffffff81681a15>] pcibios_init+0x28/0x3a
>  [<ffffffff8168114d>] pci_subsys_init+0x44/0x4a
>  [<ffffffff81681109>] ? pci_legacy_init+0x3e/0x3e
>  [<ffffffff81000208>] do_one_initcall+0x78/0x128
>  [<ffffffff8165fb00>] do_basic_setup+0x91/0xaf
>  [<ffffffff8165f44e>] ? rdinit_setup+0x28/0x28
>  [<ffffffff8168996c>] ? setup_APIC_timer+0x50/0x52
>  [<ffffffff8165fb83>] kernel_init+0x65/0xd6
>  [<ffffffff812e0fc4>] kernel_thread_helper+0x4/0x10
>  [<ffffffff8165fb1e>] ? do_basic_setup+0xaf/0xaf
>  [<ffffffff812e0fc0>] ? gs_change+0xb/0xb
> ---[ end trace 6d450e935ee1897c ]---
>
>
> Linux version 3.4.0-rc2 (mroos@vaarikas) (gcc version 4.6.3 (Debian 4.6.3-2) ) #194 PREEMPT Sun Apr 8 17:40:51 EEST 2012
> Command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0-rc2 root=/dev/sda1 ro pata_ali.atapi_dma=1
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000009efb0000 (usable)
>  BIOS-e820: 000000009efb0000 - 000000009efc0000 (ACPI data)
>  BIOS-e820: 000000009efc0000 - 000000009eff0000 (ACPI NVS)
>  BIOS-e820: 000000009eff0000 - 000000009f000000 (reserved)
>  BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
> NX (Execute Disable) protection: active
> DMI 2.3 present.
> DMI:          939Dual-SATA2/939Dual-SATA2, BIOS P2.30 09/25/2006
> e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> AGP bridge at 00:04:00
> Aperture from AGP @ d0000000 old size 32 MB
> Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
> Aperture from AGP @ d0000000 size 32 MB (APSIZE 0)
> last_pfn = 0x9efb0 max_arch_pfn = 0x400000000
> MTRR default type: uncachable
> MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-EFFFF uncachable
>  F0000-FFFFF write-protect
> MTRR variable ranges enabled:
>  0 base 0000000000 mask FF80000000 write-back
>  1 base 0080000000 mask FFF0000000 write-back
>  2 base 0090000000 mask FFF8000000 write-back
>  3 base 0098000000 mask FFFC000000 write-back
>  4 base 009C000000 mask FFFE000000 write-back
>  5 base 009E000000 mask FFFF000000 write-back
>  6 disabled
>  7 disabled
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> found SMP MP-table at [ffff8800000ff780] ff780
> initial memory mapped : 0 - 20000000
> Base memory trampoline at [ffff88000009a000] 9a000 size 20480
> init_memory_mapping: 0000000000000000-000000009efb0000
>  0000000000 - 009ee00000 page 2M
>  009ee00000 - 009efb0000 page 4k
> kernel direct mapping tables up to 9efb0000 @ 1fffb000-20000000
> ACPI: RSDP 00000000000f9a50 00014 (v00 ACPIAM)
> ACPI: RSDT 000000009efb0000 00034 (v01 A M I  OEMRSDT  09000625 MSFT 00000097)
> ACPI: FACP 000000009efb0200 00084 (v02 A M I  OEMFACP  09000625 MSFT 00000097)
> ACPI: DSDT 000000009efb0440 0474D (v01  939M2 939M2222 00000222 INTL 02002026)
> ACPI: FACS 000000009efc0000 00040
> ACPI: APIC 000000009efb0390 00068 (v01 A M I  OEMAPIC  09000625 MSFT 00000097)
> ACPI: MCFG 000000009efb0400 0003C (v01 A M I  OEMMCFG  09000625 MSFT 00000097)
> ACPI: OEMB 000000009efc0040 00057 (v01 A M I  AMI_OEM  09000625 MSFT 00000097)
> ACPI: Local APIC address 0xfee00000
>  [ffffea0000000000-ffffea00023fffff] PMD -> [ffff88009be00000-ffff88009e1fffff] on node 0
> Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   empty
> Movable zone start PFN for each node
> Early memory PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0009efb0
> On node 0 totalpages: 651071
>  DMA zone: 56 pages used for memmap
>  DMA zone: 5 pages reserved
>  DMA zone: 3922 pages, LIFO batch:0
>  DMA32 zone: 8847 pages used for memmap
>  DMA32 zone: 638241 pages, LIFO batch:31
> Detected use of extended apic ids on hypertransport bus
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
> IOAPIC[1]: apic_id 2, version 17, address 0xfec10000, GSI 24-39
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Using ACPI (MADT) for SMP configuration information
> nr_irqs_gsi: 56
> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
> PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
> Allocating PCI resources starting at 9f000000 (gap: 9f000000:607c0000)
> pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
> pcpu-alloc: [0] 0
> Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 642163
> Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0-rc2 root=/dev/sda1 ro pata_ali.atapi_dma=1
> PID hash table entries: 4096 (order: 3, 32768 bytes)
> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Checking aperture...
> AGP bridge at 00:04:00
> Aperture from AGP @ d0000000 old size 32 MB
> Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
> Aperture from AGP @ d0000000 size 32 MB (APSIZE 0)
> Node 0: aperture @ d0000000 size 256 MB
> Memory: 2553652k/2604736k available (2956k kernel code, 452k absent, 50632k reserved, 3562k data, 396k init)
> NR_IRQS:4352 nr_irqs:256 16
> spurious 8259A interrupt: IRQ7.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> Fast TSC calibration using PIT
> Detected 2199.907 MHz processor.
> Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.81 BogoMIPS (lpj=8799628)
> pid_max: default: 32768 minimum: 301
> Security Framework initialized
> Mount-cache hash table entries: 256
> tseg: 0000000000
> mce: CPU supports 5 MCE banks
> CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 02
> ACPI: Core revision 20120320
> Performance Events: AMD PMU driver.
> ... version:                0
> ... bit width:              48
> ... generic registers:      4
> ... value mask:             0000ffffffffffff
> ... max period:             00007fffffffffff
> ... fixed-purpose events:   0
> ... event mask:             000000000000000f
> NMI watchdog: enabled, takes one hw-pmu counter.
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> PM: Registering ACPI NVS region [mem 0x9efc0000-0x9efeffff] (196608 bytes)
> NET: Registered protocol family 16
> node 0 link 0: io port [1000, ffffff]
> TOM: 000000009f000000 aka 2544M
> node 0 link 0: mmio [e0000000, efffffff]
> node 0 link 0: mmio [a0000, bffff]
> node 0 link 0: mmio [9f000000, ffffffff]
> bus: [00, ff] on node 0 link 0
> bus: 00 index 0 [io  0x0000-0xffff]
> bus: 00 index 1 [mem 0x9f000000-0xfcffffffff]
> bus: 00 index 2 [mem 0x000a0000-0x000bffff]
> ACPI: bus type pci registered
> PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> PCI: not using MMCONFIG
> PCI: Using configuration type 1 for base access
> bio: create slab <bio-0> at 0
> ACPI: Added _OSI(Module Device)
> ACPI: Added _OSI(Processor Device)
> ACPI: Added _OSI(3.0 _SCP Extensions)
> ACPI: Added _OSI(Processor Aggregator Device)
> ACPI: EC: Look up EC in DSDT
> ACPI: Executed 1 blocks of module-level executable AML code
> ACPI: Interpreter enabled
> ACPI: (supports S0 S1 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
> ACPI: No dock devices found.
> PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
> ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
> pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
> pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
> pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
> pci_root PNP0A03:00: host bridge window [mem 0x9f000000-0xffffffff] (ignored)
> PCI: root bus 00: hardware-probed resources
> PCI host bridge to bus 0000:00
> pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
> pci_bus 0000:00: root bus resource [mem 0x9f000000-0xfcffffffff]
> pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> pci 0000:00:00.0: [10b9:1695] type 00 class 0x060000
> pci 0000:00:01.0: [10b9:524b] type 01 class 0x060400
> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:02.0: [10b9:524c] type 01 class 0x060400
> pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:03.0: [10b9:524d] type 01 class 0x060400
> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:04.0: [10b9:1689] type 00 class 0x060000
> pci 0000:00:04.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
> pci 0000:00:05.0: [10b9:5246] type 01 class 0x060400
> pci 0000:00:06.0: [10b9:5249] type 01 class 0x060401
> pci 0000:00:07.0: [10b9:1563] type 00 class 0x060100
> pci 0000:00:07.1: [10b9:7101] type 00 class 0x068000
> pci 0000:00:07.1: quirk: [io  0x0800-0x083f] claimed by ali7101 ACPI
> pci 0000:00:12.0: [10b9:5229] type 00 class 0x01018a
> pci 0000:00:12.0: reg 20: [io  0xff00-0xff0f]
> pci 0000:00:12.1: [10b9:5289] type 00 class 0x01018f
> pci 0000:00:12.1: reg 10: [io  0xec00-0xec07]
> pci 0000:00:12.1: reg 14: [io  0xe880-0xe883]
> pci 0000:00:12.1: reg 18: [io  0xe800-0xe807]
> pci 0000:00:12.1: reg 1c: [io  0xe480-0xe483]
> pci 0000:00:12.1: reg 20: [io  0xe400-0xe40f]
> pci 0000:00:13.0: [10b9:5237] type 00 class 0x0c0310
> pci 0000:00:13.0: reg 10: [mem 0xff6ff000-0xff6fffff]
> pci 0000:00:13.1: [10b9:5237] type 00 class 0x0c0310
> pci 0000:00:13.1: reg 10: [mem 0xff6fe000-0xff6fefff]
> pci 0000:00:13.2: [10b9:5237] type 00 class 0x0c0310
> pci 0000:00:13.2: reg 10: [mem 0xff6fd000-0xff6fdfff]
> pci 0000:00:13.3: [10b9:5239] type 00 class 0x0c0320
> pci 0000:00:13.3: reg 10: [mem 0xff6fcc00-0xff6fccff]
> pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
> pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
> pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
> pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
> pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
> pci 0000:01:00.0: [1002:954f] type 00 class 0x030000
> pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
> pci 0000:01:00.0: reg 18: [mem 0xff0f0000-0xff0fffff 64bit]
> pci 0000:01:00.0: reg 20: [io  0xa000-0xa0ff]
> pci 0000:01:00.0: reg 30: [mem 0xff0c0000-0xff0dffff pref]
> pci 0000:01:00.0: supports D1 D2
> pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
> pci 0000:01:00.1: reg 10: [mem 0xff0ec000-0xff0effff 64bit]
> pci 0000:01:00.1: supports D1 D2
> pci 0000:00:01.0: PCI bridge to [bus 01-01]
> pci 0000:00:01.0:   bridge window [io  0x8000-0xafff]
> pci 0000:00:01.0:   bridge window [mem 0xff000000-0xff0fffff]
> pci 0000:00:01.0:   bridge window [mem 0x9fe00000-0xbfdfffff pref]
> pci 0000:00:02.0: PCI bridge to [bus 02-02]
> pci 0000:00:02.0:   bridge window [mem 0xff100000-0xff1fffff]
> pci 0000:03:00.0: [197b:2360] type 00 class 0x010601
> pci 0000:03:00.0: reg 10: [io  0xbc00-0xbc07]
> pci 0000:03:00.0: reg 14: [io  0xb880-0xb883]
> pci 0000:03:00.0: reg 18: [io  0xb800-0xb807]
> pci 0000:03:00.0: reg 1c: [io  0xb480-0xb483]
> pci 0000:03:00.0: reg 20: [io  0xb400-0xb40f]
> pci 0000:03:00.0: reg 24: [mem 0x00000000-0x00001fff]
> pci 0000:03:00.0: PME# supported from D3hot
> pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
> pci 0000:00:03.0: PCI bridge to [bus 03-03]
> pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
> pci 0000:00:03.0:   bridge window [mem 0xff200000-0xff2fffff]
> pci 0000:00:05.0: PCI bridge to [bus 04-04]
> pci 0000:00:05.0:   bridge window [mem 0xff300000-0xff3fffff]
> pci 0000:05:05.0: [1102:0002] type 00 class 0x000100
> pci 0000:05:05.0: reg 10: [io  0xd880-0xd89f]
> pci 0000:05:05.0: supports D1 D2
> pci 0000:05:05.1: [1102:7002] type 00 class 0x098000
> pci 0000:05:05.1: reg 10: [io  0xdc00-0xdc07]
> pci 0000:05:05.1: supports D1 D2
> pci 0000:05:06.0: [8086:b154] type 01 class 0x060400
> pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:05:07.0: [109e:036e] type 00 class 0x040000
> pci 0000:05:07.0: reg 10: [mem 0xbfeff000-0xbfefffff pref]
> pci 0000:05:07.1: [109e:0878] type 00 class 0x048000
> pci 0000:05:07.1: reg 10: [mem 0xbfefe000-0xbfefefff pref]
> pci 0000:00:06.0: PCI bridge to [bus 05-06] (subtractive decode)
> pci 0000:00:06.0:   bridge window [io  0xc000-0xdfff]
> pci 0000:00:06.0:   bridge window [mem 0xff400000-0xff5fffff]
> pci 0000:00:06.0:   bridge window [mem 0xbfe00000-0xbfefffff pref]
> pci 0000:00:06.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
> pci 0000:00:06.0:   bridge window [mem 0x9f000000-0xfcffffffff] (subtractive decode)
> pci 0000:00:06.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> pci 0000:06:04.0: [8086:1229] type 00 class 0x020000
> pci 0000:06:04.0: reg 10: [mem 0xff4ff000-0xff4fffff]
> pci 0000:06:04.0: reg 14: [io  0xcc00-0xcc3f]
> pci 0000:06:04.0: reg 18: [mem 0xff4c0000-0xff4dffff]
> pci 0000:06:04.0: supports D1 D2
> pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:06:05.0: [8086:1229] type 00 class 0x020000
> pci 0000:06:05.0: reg 10: [mem 0xff4fe000-0xff4fefff]
> pci 0000:06:05.0: reg 14: [io  0xc880-0xc8bf]
> pci 0000:06:05.0: reg 18: [mem 0xff4a0000-0xff4bffff]
> pci 0000:06:05.0: supports D1 D2
> pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:05:06.0: PCI bridge to [bus 06-06]
> pci 0000:05:06.0:   bridge window [io  0xc000-0xcfff]
> pci 0000:05:06.0:   bridge window [mem 0xff400000-0xff4fffff]
> pci_bus 0000:00: on NUMA node 0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT]
>  pci0000:00: Requesting ACPI _OSC control (0x1d)
>  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
> ACPI _OSC control for PCIe not granted, disabling ASPM
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
> ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
> vgaarb: loaded
> vgaarb: bridge control possible 0000:01:00.0
> SCSI subsystem initialized
> libata version 3.00 loaded.
> PCI: Using ACPI for IRQ routing
> PCI: pci_cache_line_size set to 64 bytes
> pci 0000:00:04.0: address space collision: [mem 0xd0000000-0xdfffffff pref] conflicts with GART [mem 0xd0000000-0xdfffffff]
> ------------[ cut here ]------------
> WARNING: at arch/x86/pci/i386.c:60 pcibios_fwaddrmap_lookup+0x1a/0x3a()
> Hardware name: 939Dual-SATA2
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 3.4.0-rc2 #194
> Call Trace:
>  [<ffffffff81023c0a>] warn_slowpath_common+0x7e/0x96
>  [<ffffffff81023c37>] warn_slowpath_null+0x15/0x17
>  [<ffffffff8121f2b5>] pcibios_fwaddrmap_lookup+0x1a/0x3a
>  [<ffffffff812dd345>] pcibios_save_fw_addr+0x3d/0xcb
>  [<ffffffff8168006d>] pcibios_allocate_resources+0xc8/0x15f
>  [<ffffffff81681109>] ? pci_legacy_init+0x3e/0x3e
>  [<ffffffff8168011b>] pcibios_resource_survey+0x17/0x2d
>  [<ffffffff81681a15>] pcibios_init+0x28/0x3a
>  [<ffffffff8168114d>] pci_subsys_init+0x44/0x4a
>  [<ffffffff81681109>] ? pci_legacy_init+0x3e/0x3e
>  [<ffffffff81000208>] do_one_initcall+0x78/0x128
>  [<ffffffff8165fb00>] do_basic_setup+0x91/0xaf
>  [<ffffffff8165f44e>] ? rdinit_setup+0x28/0x28
>  [<ffffffff8168996c>] ? setup_APIC_timer+0x50/0x52
>  [<ffffffff8165fb83>] kernel_init+0x65/0xd6
>  [<ffffffff812e0fc4>] kernel_thread_helper+0x4/0x10
>  [<ffffffff8165fb1e>] ? do_basic_setup+0xaf/0xaf
>  [<ffffffff812e0fc0>] ? gs_change+0xb/0xb
> ---[ end trace 6d450e935ee1897c ]---
> reserve RAM buffer: 000000000009fc00 - 000000000009ffff
> reserve RAM buffer: 000000009efb0000 - 000000009fffffff
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp 00:00: [bus 00-ff]
> pnp 00:00: [io  0x0cf8-0x0cff]
> pnp 00:00: [io  0x0000-0x0cf7 window]
> pnp 00:00: [io  0x0d00-0xffff window]
> pnp 00:00: [mem 0x000a0000-0x000bffff window]
> pnp 00:00: [mem 0x000d0000-0x000dffff window]
> pnp 00:00: [mem 0x9f000000-0xffffffff window]
> pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> pnp 00:01: [dma 4]
> pnp 00:01: [io  0x0000-0x000f]
> pnp 00:01: [io  0x0081-0x0083]
> pnp 00:01: [io  0x0087]
> pnp 00:01: [io  0x0089-0x008b]
> pnp 00:01: [io  0x008f]
> pnp 00:01: [io  0x00c0-0x00df]
> pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> pnp 00:02: [io  0x0070-0x0071]
> pnp 00:02: [irq 8]
> pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> pnp 00:03: [io  0x0061]
> pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
> pnp 00:04: [io  0x00f0-0x00ff]
> pnp 00:04: [irq 13]
> pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> pnp 00:05: [io  0x03f0-0x03f5]
> pnp 00:05: [io  0x03f7]
> pnp 00:05: [irq 6]
> pnp 00:05: [dma 2]
> pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
> pnp 00:06: [io  0x0378-0x037f]
> pnp 00:06: [io  0x0778-0x077f]
> pnp 00:06: [irq 7]
> pnp 00:06: [dma 3]
> pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
> pnp 00:07: [io  0x0010-0x001f]
> pnp 00:07: [io  0x0022-0x003f]
> pnp 00:07: [io  0x0044-0x005f]
> pnp 00:07: [io  0x0062-0x0063]
> pnp 00:07: [io  0x0065-0x006f]
> pnp 00:07: [io  0x0072-0x007f]
> pnp 00:07: [io  0x0080]
> pnp 00:07: [io  0x0084-0x0086]
> pnp 00:07: [io  0x0088]
> pnp 00:07: [io  0x008c-0x008e]
> pnp 00:07: [io  0x0090-0x009f]
> pnp 00:07: [io  0x00a2-0x00bf]
> pnp 00:07: [io  0x00e0-0x00ef]
> pnp 00:07: [io  0x0480-0x048f]
> pnp 00:07: [io  0x04d0-0x04d1]
> pnp 00:07: [io  0x0800-0x087f]
> pnp 00:07: [io  0x0400-0x040f]
> system 00:07: [io  0x0480-0x048f] has been reserved
> system 00:07: [io  0x04d0-0x04d1] has been reserved
> system 00:07: [io  0x0800-0x087f] could not be reserved
> system 00:07: [io  0x0400-0x040f] has been reserved
> system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> pnp 00:08: [mem 0xfec00000-0xfec00fff]
> pnp 00:08: [mem 0xfee00000-0xfee00fff]
> pnp 00:08: [mem 0xe0000000-0xefffffff]
> pnp 00:08: [mem 0xfec10000-0xfec10fff]
> pnp 00:08: [mem 0xffb00000-0xffffffff]
> system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
> system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
> system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
> system 00:08: [mem 0xfec10000-0xfec10fff] could not be reserved
> system 00:08: [mem 0xffb00000-0xffffffff] has been reserved
> system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
> pnp 00:09: [io  0x0060]
> pnp 00:09: [io  0x0064]
> pnp 00:09: [irq 1]
> pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
> pnp 00:0a: [io  0x03f8-0x03ff]
> pnp 00:0a: [irq 4]
> pnp 00:0a: [dma 0 disabled]
> pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
> pnp 00:0b: [io  0x0000-0xffffffffffffffff disabled]
> pnp 00:0b: [io  0x0290-0x029f]
> system 00:0b: [io  0x0290-0x029f] has been reserved
> system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> pnp 00:0c: [mem 0x00000000-0x0009ffff]
> pnp 00:0c: [mem 0x000c0000-0x000cffff]
> pnp 00:0c: [mem 0x000e0000-0x000fffff]
> pnp 00:0c: [mem 0x00100000-0x9effffff]
> pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
> pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
> pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
> pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
> pnp 00:0c: disabling [mem 0x00100000-0x9effffff] because it overlaps 0000:00:04.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
> system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> pnp: PnP ACPI: found 13 devices
> ACPI: ACPI bus type pnp unregistered
> pci 0000:00:01.0: PCI bridge to [bus 01-01]
> pci 0000:00:01.0:   bridge window [io  0x8000-0xafff]
> pci 0000:00:01.0:   bridge window [mem 0xff000000-0xff0fffff]
> pci 0000:00:01.0:   bridge window [mem 0x9fe00000-0xbfdfffff pref]
> pci 0000:00:02.0: PCI bridge to [bus 02-02]
> pci 0000:00:02.0:   bridge window [mem 0xff100000-0xff1fffff]
> pci 0000:03:00.0: BAR 5: assigned [mem 0xff200000-0xff201fff]
> pci 0000:00:03.0: PCI bridge to [bus 03-03]
> pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
> pci 0000:00:03.0:   bridge window [mem 0xff200000-0xff2fffff]
> pci 0000:00:05.0: PCI bridge to [bus 04-04]
> pci 0000:00:05.0:   bridge window [mem 0xff300000-0xff3fffff]
> pci 0000:05:06.0: PCI bridge to [bus 06-06]
> pci 0000:05:06.0:   bridge window [io  0xc000-0xcfff]
> pci 0000:05:06.0:   bridge window [mem 0xff400000-0xff4fffff]
> pci 0000:00:06.0: PCI bridge to [bus 05-06]
> pci 0000:00:06.0:   bridge window [io  0xc000-0xdfff]
> pci 0000:00:06.0:   bridge window [mem 0xff400000-0xff5fffff]
> pci 0000:00:06.0:   bridge window [mem 0xbfe00000-0xbfefffff pref]
> pci 0000:00:05.0: setting latency timer to 64
> pci 0000:00:06.0: setting latency timer to 64
> pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
> pci_bus 0000:00: resource 5 [mem 0x9f000000-0xfcffffffff]
> pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:01: resource 0 [io  0x8000-0xafff]
> pci_bus 0000:01: resource 1 [mem 0xff000000-0xff0fffff]
> pci_bus 0000:01: resource 2 [mem 0x9fe00000-0xbfdfffff pref]
> pci_bus 0000:02: resource 1 [mem 0xff100000-0xff1fffff]
> pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
> pci_bus 0000:03: resource 1 [mem 0xff200000-0xff2fffff]
> pci_bus 0000:04: resource 1 [mem 0xff300000-0xff3fffff]
> pci_bus 0000:05: resource 0 [io  0xc000-0xdfff]
> pci_bus 0000:05: resource 1 [mem 0xff400000-0xff5fffff]
> pci_bus 0000:05: resource 2 [mem 0xbfe00000-0xbfefffff pref]
> pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
> pci_bus 0000:05: resource 5 [mem 0x9f000000-0xfcffffffff]
> pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
> pci_bus 0000:06: resource 1 [mem 0xff400000-0xff4fffff]
> NET: Registered protocol family 2
> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP: reno registered
> UDP hash table entries: 2048 (order: 4, 65536 bytes)
> UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
> NET: Registered protocol family 1
> pci 0000:00:00.0: Enabling HT MSI Mapping
> pci 0000:00:01.0: Enabling HT MSI Mapping
> pci 0000:00:02.0: Enabling HT MSI Mapping
> pci 0000:00:03.0: Enabling HT MSI Mapping
> Switching to clocksource acpi_pm
> pci 0000:01:00.0: Boot video device
> pci 0000:06:04.0: Firmware left e100 interrupts enabled; disabling
> pci 0000:06:05.0: Firmware left e100 interrupts enabled; disabling
> PCI: CLS 64 bytes, default 64
> HugeTLB registered 2 MB page size, pre-allocated 0 pages
> msgmni has been set to 4987
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> start plist test
> end plist test
> pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
> pcieport 0000:00:02.0: irq 57 for MSI/MSI-X
> pcieport 0000:00:03.0: irq 58 for MSI/MSI-X
> input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
> ACPI: Power Button [PWRB]
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> ACPI: Power Button [PWRF]
> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Non-volatile memory driver v1.3
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> ahci 0000:03:00.0: version 3.0
> ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
> scsi0 : ahci
> ata1: SATA max UDMA/133 abar m8192@0xff200000 port 0xff200100 irq 35
> PPP generic driver version 2.4.2
> i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> serio: i8042 KBD port at 0x60,0x64 irq 1
> mousedev: PS/2 mouse device common for all mice
> rtc_cmos 00:02: RTC can wake from S4
> rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one month, 114 bytes nvram
> cpuidle: using governor ladder
> cpuidle: using governor menu
> TCP: cubic registered
> NET: Registered protocol family 10
> NET: Registered protocol family 17
> Registering the dns_resolver key type
> registered taskstats version 1
> rtc_cmos 00:02: setting system clock to 2012-04-12 15:37:18 UTC (1334245038)
> input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
> ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> ata1.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>  sda: sda1 sda2 sda3
> sd 0:0:0:0: [sda] Attached SCSI disk
> EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
> EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
> EXT4-fs (sda1): INFO: recovery required on readonly filesystem
> EXT4-fs (sda1): write access will be enabled during recovery
> Refined TSC clocksource calibration: 2200.081 MHz.
> Switching to clocksource tsc
> EXT4-fs (sda1): orphan cleanup on readonly fs
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 922401
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 280767
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 262214
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285084
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285105
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285091
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285096
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 276141
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 263192
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285081
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285078
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285077
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 558852
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285074
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 262200
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285102
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 285098
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 281781
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 788827
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 809507
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 809505
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 820672
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 820576
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 919067
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 790424
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 794630
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 793823
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 922402
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 528027
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 820515
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 394027
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 528670
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1185453
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 800185
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 790730
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 790729
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 790728
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 921539
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 919123
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 926537
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 926535
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 926052
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 532972
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 264585
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 820716
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 791815
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 535282
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 810833
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 810818
> EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 810888
> EXT4-fs (sda1): 50 orphan inodes deleted
> EXT4-fs (sda1): recovery complete
> EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
> VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
> Freeing unused kernel memory: 396k freed
> Write protecting the kernel read-only data: 6144k
> Freeing unused kernel memory: 1124k freed
> Freeing unused kernel memory: 472k freed
> Linux agpgart interface v0.103
> agpgart-amd64 0000:00:04.0: AGP bridge [10b9/1689]
> agpgart-amd64 0000:00:04.0: aperture size 4096 MB is not right, using settings from NB
> agpgart-amd64 0000:00:04.0: setting up ULi AGP
> agpgart-amd64 0000:00:04.0: AGP aperture is 256M @ 0xd0000000
> input: PC Speaker as /devices/platform/pcspkr/input/input3
> ali1535_smbus 0000:00:07.1: enabling device (0000 -> 0001)
> ali1535_smbus 0000:00:07.1: ALI1535_smb region uninitialized - upgrade BIOS?
> ali1535_smbus 0000:00:07.1: ALI1535 not detected, module not inserted.
> ACPI Warning: 0x0000000000000400-0x000000000000040f SystemIO conflicts with Region \SMIO 1 (20120320/utaddress-251)
> ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> ali1563_smbus 0000:00:07.0: ALi1563 SMBus probe failed (-19)
> ali15x3_smbus 0000:00:07.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
> ali15x3_smbus 0000:00:07.1: ALI15X3 not detected, module not inserted.
> microcode: CPU0: family 15 not supported
> microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ (1 cpu cores) (version 2.20.00)
> powernow-k8: fid 0xe (2200 MHz), vid 0x6
> powernow-k8: fid 0xc (2000 MHz), vid 0x8
> powernow-k8: fid 0xa (1800 MHz), vid 0xa
> powernow-k8: fid 0x2 (1000 MHz), vid 0x12
> e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
> e100: Copyright(c) 1999-2006 Intel Corporation
> e100 0000:06:04.0: eth0: addr 0xff4ff000, irq 21, MAC addr 00:02:b3:bc:9f:dd
> e100 0000:06:05.0: eth1: addr 0xff4fe000, irq 22, MAC addr 00:02:b3:bc:9f:de
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> Linux media interface: v0.10
> parport_pc 00:06: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
> [drm] Initialized drm 1.1.0 20060810
> udevd[548]: renamed network interface eth0 to rename2
> udevd[546]: renamed network interface eth1 to eth0
> scsi1 : pata_ali
> scsi2 : pata_ali
> ata2: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
> ata3: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci_hcd 0000:00:13.3: EHCI Host Controller
> ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:13.3: debug port 1
> Linux video capture interface: v2.00
> udevd[548]: renamed network interface rename2 to eth1
> ehci_hcd 0000:00:13.3: irq 23, io mem 0xff6fcc00
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 3.4.0-rc2 ehci_hcd
> usb usb1: SerialNumber: 0000:00:13.3
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> ohci_hcd 0000:00:13.0: OHCI Host Controller
> ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:13.0: irq 20, io mem 0xff6ff000
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: OHCI Host Controller
> usb usb2: Manufacturer: Linux 3.4.0-rc2 ohci_hcd
> usb usb2: SerialNumber: 0000:00:13.0
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 3 ports detected
> sata_uli 0000:00:12.1: version 1.3
> scsi3 : sata_uli
> scsi4 : sata_uli
> ata4: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
> ata5: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
> ohci_hcd 0000:00:13.1: OHCI Host Controller
> ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:13.1: irq 21, io mem 0xff6fe000
> ata2.00: ATAPI: _NEC DVD_RW ND-4571A, 1-01, max UDMA/33
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: OHCI Host Controller
> usb usb3: Manufacturer: Linux 3.4.0-rc2 ohci_hcd
> usb usb3: SerialNumber: 0000:00:13.1
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 3 ports detected
> ohci_hcd 0000:00:13.2: OHCI Host Controller
> ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
> ohci_hcd 0000:00:13.2: irq 22, io mem 0xff6fd000
> ata2.00: configured for UDMA/33
> scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-4571A  1-01 PQ: 0 ANSI: 5
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: OHCI Host Controller
> usb usb4: Manufacturer: Linux 3.4.0-rc2 ohci_hcd
> usb usb4: SerialNumber: 0000:00:13.2
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 3 ports detected
> Marking TSC unstable due to cpufreq changes
> Switching to clocksource acpi_pm
> usb 3-1: new low-speed USB device number 2 using ohci_hcd
> sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> cdrom: Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> usb 3-1: New USB device found, idVendor=0592, idProduct=0002
> usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 3-1: Product: Powerware UPS
> usb 3-1: Manufacturer: Powerware
> bttv: driver version 0.9.19 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0)
> bttv: 0: Bt878 (rev 2) at 0000:05:07.0, irq: 22, latency: 64, mmio: 0xbfeff000
> bttv: 0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
> bttv: 0: using: Hauppauge (bt878) [card=10,autodetected]
> bttv: 0: Hauppauge/Voodoo msp34xx: reset line init [5]
> [drm] radeon kernel modesetting enabled.
> [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x1787:0x2271).
> [drm] register mmio base: 0xFF0F0000
> [drm] register mmio size: 65536
> ATOM BIOS: 113
> radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
> radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
> [drm] Detected VRAM RAM=512M, BAR=256M
> [drm] RAM width 64bits DDR
> [TTM] Zone  kernel: Available graphics memory: 1277822 kiB
> [TTM] Initializing pool allocator
> [TTM] Initializing DMA pool allocator
> [drm] radeon: 512M of VRAM memory ready
> [drm] radeon: 512M of GTT memory ready.
> [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [drm] Driver supports precise vblank timestamp query.
> radeon 0000:01:00.0: irq 59 for MSI/MSI-X
> radeon 0000:01:00.0: radeon: using MSI.
> [drm] radeon: irq initialized.
> [drm] GART: num cpu pages 131072, num gpu pages 131072
> tveeprom 0-0050: Hauppauge model 37284, rev B121, serial# 3520921
> tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
> tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
> tveeprom 0-0050: audio processor is MSP3410D (idx 5)
> tveeprom 0-0050: has radio
> bttv: 0: Hauppauge eeprom indicates model#37284
> bttv: 0: tuner type=5
> [drm] radeon: ib pool ready.
> [drm] Loading RV710 Microcode
> i2c-core: driver [msp3400] using legacy suspend method
> i2c-core: driver [msp3400] using legacy resume method
> msp3400 0-0040: MSP3410D-B4 found @ 0x80 (bt878 #0 [sw])
> msp3400 0-0040: msp3400 supports nicam, mode is autodetect
> usb 2-1: new full-speed USB device number 2 using ohci_hcd
> i2c-core: driver [tuner] using legacy suspend method
> i2c-core: driver [tuner] using legacy resume method
> usb 2-1: New USB device found, idVendor=03f0, idProduct=7404
> usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 2-1: Product: Deskjet 3740
> usb 2-1: Manufacturer: HP
> usb 2-1: SerialNumber: CN4CJ150T3040Q
> tda9887 0-0042: creating new instance
> tda9887 0-0042: tda988[5/6/7] found
> tuner 0-0042: Tuner 74 found with type(s) Radio TV.
> tuner 0-0061: Tuner -1 found with type(s) Radio TV.
> tuner-simple 0-0061: creating new instance
> tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
> bttv: 0: registered device video0
> bttv: 0: registered device vbi0
> bttv: 0: registered device radio0
> bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
> bttv: PLL set ok
> bt87x0: Using board 1, analog, digital (rate 32000 Hz)
> snd_emu10k1 0000:05:05.0: enabling device (0000 -> 0001)
> [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
> radeon 0000:01:00.0: WB enabled
> [drm] fence driver on ring 0 use gpu addr 0x20000c00 and cpu addr 0xffff88009afc4c00
> usb 2-2: new low-speed USB device number 3 using ohci_hcd
> [drm] ring test on 0 succeeded in 1 usecs
> [drm] ib test on ring 0 succeeded in 0 usecs
> [drm] Radeon Display Connectors
> [drm] Connector 0:
> [drm]   VGA
> [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
> [drm]   Encoders:
> [drm]     CRT2: INTERNAL_KLDSCP_DAC2
> [drm] Connector 1:
> [drm]   HDMI-A
> [drm]   HPD1
> [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
> [drm]   Encoders:
> [drm]     DFP1: INTERNAL_UNIPHY
> [drm] Connector 2:
> [drm]   DVI-I
> [drm]   HPD4
> [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
> [drm]   Encoders:
> [drm]     CRT1: INTERNAL_KLDSCP_DAC1
> [drm]     DFP2: INTERNAL_UNIPHY2
> [drm] Internal thermal controller with fan control
> [drm] radeon: power management initialized
> usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7404
> usbcore: registered new interface driver usblp
> [drm] fb mappable at 0xA0142000
> [drm] vram apper at 0xA0000000
> [drm] size 7680000
> [drm] fb depth is 24
> [drm]    pitch is 6400
> fbcon: radeondrmfb (fb0) is primary device
> usb 2-2: New USB device found, idVendor=046d, idProduct=c00c
> usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-2: Product: USB Mouse
> usb 2-2: Manufacturer: Logitech
> input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input4
> generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.0-2/input0
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> Console: switching to colour frame buffer device 200x75
> fb0: radeondrmfb frame buffer device
> drm: registered panic notifier
> [drm] Initialized radeon 2.15.0 20080528 for 0000:01:00.0 on minor 0
> hda-intel: Using LPIB position fix
> snd_hda_intel 0000:01:00.1: irq 60 for MSI/MSI-X
> hda-intel: Enable sync_write for stable communication
> HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
> input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input5
> Adding 4891788k swap on /dev/sda2.  Priority:-1 extents:1 across:4891788k
> EXT4-fs (sda1): re-mounted. Opts: (null)
> EXT4-fs (sda1): re-mounted. Opts: (null)
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx
> w83627hf: w83627hf: Found W83627HF chip at 0x290
> ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \SMIO 1 (20120320/utaddress-251)
> ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> 8021q: 802.1Q VLAN Support v1.8
> EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> e100 0000:06:05.0: eth0: NIC Link is Up 100 Mbps Full Duplex
> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> ip_tables: (C) 2000-2006 Netfilter Core Team
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> e100 0000:06:04.0: eth1: NIC Link is Up 100 Mbps Full Duplex
> ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> IPv6 over IPv4 tunneling driver
> fuse init (API version 7.18)
> input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6
> Netfilter messages via NETLINK v0.30.
> Bluetooth: Core ver 2.16
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: SCO socket layer initialized
> Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> Bluetooth: BNEP filters: protocol multicast
> Bluetooth: RFCOMM TTY layer initialized
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM ver 1.11
> lp0: using parport0 (interrupt-driven).
> ppdev: user-space parallel port driver
> tun: Universal TUN/TAP device driver, 1.6
> tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
> JFS: nTxBlock = 8192, nTxLock = 65536
> NTFS driver 2.1.30 [Flags: R/W MODULE].
>
> --
> Meelis Roos (mroos@xxxxxxxx)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/