[PATCH 24/37] atl1c: remove REG_PHY_STATUS

From: xiong
Date: Thu Apr 12 2012 - 20:18:39 EST


this register is used for l1e(dev=1026)
l1c/l1d/l2cb don't use it.

Signed-off-by: xiong <xiong@xxxxxxxxxxxxxxxx>
Tested-by: Liu David <dwliu@xxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 7 -------
drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 2 --
2 files changed, 0 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
index eaa1760..dfb1051 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
@@ -333,13 +333,6 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
#define MDIO_AP_EN 0x10000000
#define MDIO_WAIT_TIMES 10

-/* MII PHY Status Register */
-#define REG_PHY_STATUS 0x1418
-#define PHY_GENERAL_STATUS_MASK 0xFFFF
-#define PHY_STATUS_RECV_ENABLE 0x0001
-#define PHY_OE_PWSP_STATUS_MASK 0x07FF
-#define PHY_OE_PWSP_STATUS_SHIFT 16
-#define PHY_STATUS_LPW_STATE 0x80000000
/* BIST Control and Status Register0 (for the Packet Memory) */
#define REG_BIST0_CTRL 0x141c
#define BIST0_NOW 0x1
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 6534963..13aaf63 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -693,11 +693,9 @@ static void atl1c_set_mac_type(struct atl1c_hw *hw)

static int atl1c_setup_mac_funcs(struct atl1c_hw *hw)
{
- u32 phy_status_data;
u32 link_ctrl_data;

atl1c_set_mac_type(hw);
- AT_READ_REG(hw, REG_PHY_STATUS, &phy_status_data);
AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data);

hw->ctrl_flags = ATL1C_INTR_MODRT_ENABLE |
--
1.7.7

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/