[PATCH V3 1/2] mfd: Add driver for STA2X11 MFD block
From: Alessandro Rubini
Date: Thu Apr 12 2012 - 04:49:06 EST
This also introduces <asm/sta2x11.h> to export a function that is in
the base sta2x11 support patches. The header will increase with other
prototypes and constants over time.
Signed-off-by: Alessandro Rubini <rubini@xxxxxxxxx>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@xxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxx>
---
arch/x86/include/asm/sta2x11.h | 12 +
drivers/mfd/Kconfig | 6 +
drivers/mfd/Makefile | 1 +
drivers/mfd/sta2x11-mfd.c | 467 +++++++++++++++++++++++++++++++++++++++
include/linux/mfd/sta2x11-mfd.h | 324 +++++++++++++++++++++++++++
5 files changed, 810 insertions(+), 0 deletions(-)
create mode 100644 arch/x86/include/asm/sta2x11.h
create mode 100644 drivers/mfd/sta2x11-mfd.c
create mode 100644 include/linux/mfd/sta2x11-mfd.h
diff --git a/arch/x86/include/asm/sta2x11.h b/arch/x86/include/asm/sta2x11.h
new file mode 100644
index 0000000..e9d32df
--- /dev/null
+++ b/arch/x86/include/asm/sta2x11.h
@@ -0,0 +1,12 @@
+/*
+ * Header file for STMicroelectronics ConneXt (STA2X11) IOHub
+ */
+#ifndef __ASM_STA2X11_H
+#define __ASM_STA2X11_H
+
+#include <linux/pci.h>
+
+/* This needs to be called from the MFD to configure its sub-devices */
+struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev);
+
+#endif /* __ASM_STA2X11_H */
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 29f463c..c194c67 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -873,6 +873,12 @@ config MFD_RC5T583
Additional drivers must be enabled in order to use the
different functionality of the device.
+config MFD_STA2X11
+ bool "STA2X11 multi function device support"
+ depends on STA2X11
+ select MFD_CORE
+ select GPIO_STA2X11
+
config MFD_ANATOP
bool "Support for Freescale i.MX on-chip ANATOP controller"
depends on SOC_IMX6Q
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 05fa538..7cd8f02 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
obj-$(CONFIG_MFD_TI_SSP) += ti-ssp.o
+obj-$(CONFIG_MFD_STA2X11) += sta2x11-mfd.o
obj-$(CONFIG_MFD_STMPE) += stmpe.o
obj-$(CONFIG_STMPE_I2C) += stmpe-i2c.o
obj-$(CONFIG_STMPE_SPI) += stmpe-spi.o
diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c
new file mode 100644
index 0000000..14a79e6
--- /dev/null
+++ b/drivers/mfd/sta2x11-mfd.c
@@ -0,0 +1,467 @@
+/*
+ * Copyright (c) 2009-2011 Wind River Systems, Inc.
+ * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/sta2x11-mfd.h>
+
+#include <asm/sta2x11.h>
+
+/* This describes STA2X11 MFD chip for us, we may have several */
+struct sta2x11_mfd {
+ struct sta2x11_instance *instance;
+ spinlock_t lock;
+ struct list_head list;
+ void __iomem *sctl_regs;
+ void __iomem *apbreg_regs;
+};
+
+static LIST_HEAD(sta2x11_mfd_list);
+
+/* Three functions to act on the list */
+static struct sta2x11_mfd *sta2x11_mfd_find(struct pci_dev *pdev)
+{
+ struct sta2x11_instance *instance;
+ struct sta2x11_mfd *mfd;
+
+ if (!pdev && !list_empty(&sta2x11_mfd_list)) {
+ pr_warning("%s: Unspecified device, "
+ "using first instance\n", __func__);
+ return list_entry(sta2x11_mfd_list.next,
+ struct sta2x11_mfd, list);
+ }
+
+ instance = sta2x11_get_instance(pdev);
+ if (!instance)
+ return NULL;
+ list_for_each_entry(mfd, &sta2x11_mfd_list, list) {
+ if (mfd->instance == instance)
+ return mfd;
+ }
+ return NULL;
+}
+
+static int __devinit sta2x11_mfd_add(struct pci_dev *pdev, gfp_t flags)
+{
+ struct sta2x11_mfd *mfd = sta2x11_mfd_find(pdev);
+ struct sta2x11_instance *instance;
+
+ if (mfd)
+ return -EBUSY;
+ instance = sta2x11_get_instance(pdev);
+ if (!instance)
+ return -EINVAL;
+ mfd = kzalloc(sizeof(*mfd), flags);
+ if (!mfd)
+ return -ENOMEM;
+ INIT_LIST_HEAD(&mfd->list);
+ spin_lock_init(&mfd->lock);
+ mfd->instance = instance;
+ list_add(&mfd->list, &sta2x11_mfd_list);
+ return 0;
+}
+
+static int __devexit mfd_remove(struct pci_dev *pdev)
+{
+ struct sta2x11_mfd *mfd = sta2x11_mfd_find(pdev);
+
+ if (!mfd)
+ return -ENODEV;
+ list_del(&mfd->list);
+ kfree(mfd);
+ return 0;
+}
+
+/* These two functions are exported and are not expected to fail */
+u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val)
+{
+ struct sta2x11_mfd *mfd = sta2x11_mfd_find(pdev);
+ u32 r;
+ unsigned long flags;
+
+ if (!mfd) {
+ dev_warn(&pdev->dev, ": can't access sctl regs\n");
+ return 0;
+ }
+ if (!mfd->sctl_regs) {
+ dev_warn(&pdev->dev, ": system ctl not initialized\n");
+ return 0;
+ }
+ spin_lock_irqsave(&mfd->lock, flags);
+ r = readl(mfd->sctl_regs + reg);
+ r &= ~mask;
+ r |= val;
+ if (mask)
+ writel(r, mfd->sctl_regs + reg);
+ spin_unlock_irqrestore(&mfd->lock, flags);
+ return r;
+}
+EXPORT_SYMBOL(sta2x11_sctl_mask);
+
+u32 sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val)
+{
+ struct sta2x11_mfd *mfd = sta2x11_mfd_find(pdev);
+ u32 r;
+ unsigned long flags;
+
+ if (!mfd) {
+ dev_warn(&pdev->dev, ": can't access apb regs\n");
+ return 0;
+ }
+ if (!mfd->apbreg_regs) {
+ dev_warn(&pdev->dev, ": apb bridge not initialized\n");
+ return 0;
+ }
+ spin_lock_irqsave(&mfd->lock, flags);
+ r = readl(mfd->apbreg_regs + reg);
+ r &= ~mask;
+ r |= val;
+ if (mask)
+ writel(r, mfd->apbreg_regs + reg);
+ spin_unlock_irqrestore(&mfd->lock, flags);
+ return r;
+}
+EXPORT_SYMBOL(sta2x11_apbreg_mask);
+
+/* Two debugfs files, for our registers (FIXME: one instance only) */
+#define REG(regname) {.name = #regname, .offset = SCTL_ ## regname}
+static struct debugfs_reg32 sta2x11_sctl_regs[] = {
+ REG(SCCTL), REG(ARMCFG), REG(SCPLLCTL), REG(SCPLLFCTRL),
+ REG(SCRESFRACT), REG(SCRESCTRL1), REG(SCRESXTRL2), REG(SCPEREN0),
+ REG(SCPEREN1), REG(SCPEREN2), REG(SCGRST), REG(SCPCIPMCR1),
+ REG(SCPCIPMCR2), REG(SCPCIPMSR1), REG(SCPCIPMSR2), REG(SCPCIPMSR3),
+ REG(SCINTREN), REG(SCRISR), REG(SCCLKSTAT0), REG(SCCLKSTAT1),
+ REG(SCCLKSTAT2), REG(SCRSTSTA),
+};
+#undef REG
+
+static struct debugfs_regset32 sctl_regset = {
+ .regs = sta2x11_sctl_regs,
+ .nregs = ARRAY_SIZE(sta2x11_sctl_regs),
+};
+
+#define REG(regname) {.name = #regname, .offset = regname}
+static struct debugfs_reg32 sta2x11_apbreg_regs[] = {
+ REG(APBREG_BSR), REG(APBREG_PAER), REG(APBREG_PWAC), REG(APBREG_PRAC),
+ REG(APBREG_PCG), REG(APBREG_PUR), REG(APBREG_EMU_PCG),
+};
+#undef REG
+
+static struct debugfs_regset32 apbreg_regset = {
+ .regs = sta2x11_apbreg_regs,
+ .nregs = ARRAY_SIZE(sta2x11_apbreg_regs),
+};
+
+static struct dentry *sta2x11_sctl_debugfs;
+static struct dentry *sta2x11_apbreg_debugfs;
+
+/* Probe for the two platform devices */
+static int sta2x11_sctl_probe(struct platform_device *dev)
+{
+ struct pci_dev **pdev;
+ struct sta2x11_mfd *mfd;
+ struct resource *res;
+
+ pdev = dev->dev.platform_data;
+ mfd = sta2x11_mfd_find(*pdev);
+ if (!mfd)
+ return -ENODEV;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENOMEM;
+
+ if (!request_mem_region(res->start, resource_size(res),
+ "sta2x11-sctl"))
+ return -EBUSY;
+
+ mfd->sctl_regs = ioremap(res->start, resource_size(res));
+ if (!mfd->sctl_regs) {
+ release_mem_region(res->start, resource_size(res));
+ return -ENOMEM;
+ }
+ sctl_regset.base = mfd->sctl_regs;
+ sta2x11_sctl_debugfs = debugfs_create_regset32("sta2x11-sctl",
+ S_IFREG | S_IRUGO,
+ NULL, &sctl_regset);
+ return 0;
+}
+
+static int sta2x11_apbreg_probe(struct platform_device *dev)
+{
+ struct pci_dev **pdev;
+ struct sta2x11_mfd *mfd;
+ struct resource *res;
+
+ pdev = dev->dev.platform_data;
+ dev_dbg(&dev->dev, "%s: pdata is %p\n", __func__, pdev);
+ dev_dbg(&dev->dev, "%s: *pdata is %p\n", __func__, *pdev);
+
+ mfd = sta2x11_mfd_find(*pdev);
+ if (!mfd)
+ return -ENODEV;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENOMEM;
+
+ if (!request_mem_region(res->start, resource_size(res),
+ "sta2x11-apbreg"))
+ return -EBUSY;
+
+ mfd->apbreg_regs = ioremap(res->start, resource_size(res));
+ if (!mfd->apbreg_regs) {
+ release_mem_region(res->start, resource_size(res));
+ return -ENOMEM;
+ }
+ dev_dbg(&dev->dev, "%s: regbase %p\n", __func__, mfd->apbreg_regs);
+
+ apbreg_regset.base = mfd->apbreg_regs;
+ sta2x11_apbreg_debugfs = debugfs_create_regset32("sta2x11-apbreg",
+ S_IFREG | S_IRUGO,
+ NULL, &apbreg_regset);
+ return 0;
+}
+
+/* The two platform drivers */
+static struct platform_driver sta2x11_sctl_platform_driver = {
+ .driver = {
+ .name = "sta2x11-sctl",
+ .owner = THIS_MODULE,
+ },
+ .probe = sta2x11_sctl_probe,
+};
+
+static int __init sta2x11_sctl_init(void)
+{
+ pr_info("%s\n", __func__);
+ return platform_driver_register(&sta2x11_sctl_platform_driver);
+}
+
+static struct platform_driver sta2x11_platform_driver = {
+ .driver = {
+ .name = "sta2x11-apbreg",
+ .owner = THIS_MODULE,
+ },
+ .probe = sta2x11_apbreg_probe,
+};
+
+static int __init sta2x11_apbreg_init(void)
+{
+ pr_info("%s\n", __func__);
+ return platform_driver_register(&sta2x11_platform_driver);
+}
+
+/*
+ * What follows is the PCI device that hosts the above two pdevs.
+ * Each logic block is 4kB and they are all consecutive: we use this info.
+ */
+
+/* Bar 0 */
+enum bar0_cells {
+ GPIO_0 = 0,
+ GPIO_1,
+ GPIO_2,
+ GPIO_3,
+ SCTL,
+ SCR,
+ TIME,
+};
+/* Bar 1 */
+enum bar1_cells {
+ APBREG = 0,
+};
+#define CELL_4K(_name, _cell) { \
+ .name = _name, \
+ .start = _cell * 4096, .end = _cell * 4096 + 4095, \
+ .flags = IORESOURCE_MEM, \
+ }
+
+static const __devinitconst struct resource gpio_resources[] = {
+ {
+ .name = "sta2x11_gpio", /* 4 consecutive cells, 1 driver */
+ .start = 0,
+ .end = (4 * 4096) - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+static const __devinitconst struct resource sctl_resources[] = {
+ CELL_4K("sta2x11-sctl", SCTL),
+};
+static const __devinitconst struct resource scr_resources[] = {
+ CELL_4K("sta2x11-scr", SCR),
+};
+static const __devinitconst struct resource time_resources[] = {
+ CELL_4K("sta2x11-time", TIME),
+};
+
+static const __devinitconst struct resource apbreg_resources[] = {
+ CELL_4K("sta2x11-apbreg", APBREG),
+};
+
+#define DEV(_name, _r) \
+ { .name = _name, .num_resources = ARRAY_SIZE(_r), .resources = _r, }
+
+static __devinitdata struct mfd_cell sta2x11_mfd_bar0[] = {
+ DEV("sta2x11-gpio", gpio_resources), /* offset 0: we add pdata later */
+ DEV("sta2x11-sctl", sctl_resources),
+ DEV("sta2x11-scr", scr_resources),
+ DEV("sta2x11-time", time_resources),
+};
+
+static __devinitdata struct mfd_cell sta2x11_mfd_bar1[] = {
+ DEV("sta2x11-apbreg", apbreg_resources),
+};
+
+static int sta2x11_mfd_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int sta2x11_mfd_resume(struct pci_dev *pdev)
+{
+ int err;
+
+ pci_set_power_state(pdev, 0);
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+ pci_restore_state(pdev);
+
+ return 0;
+}
+
+static int __devinit sta2x11_mfd_probe(struct pci_dev *pdev,
+ const struct pci_device_id *pci_id)
+{
+ int err, i;
+ struct sta2x11_gpio_pdata *gpio_data;
+
+ dev_info(&pdev->dev, "%s\n", __func__);
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Can't enable device.\n");
+ return err;
+ }
+
+ err = pci_enable_msi(pdev);
+ if (err)
+ dev_info(&pdev->dev, "Enable msi failed\n");
+
+ /* Read gpio config data as pci device's platform data */
+ gpio_data = dev_get_platdata(&pdev->dev);
+ if (!gpio_data)
+ dev_warn(&pdev->dev, "no gpio configuration\n");
+
+ dev_dbg(&pdev->dev, "%s, gpio_data = %p (%p)\n", __func__,
+ gpio_data, &gpio_data);
+ dev_dbg(&pdev->dev, "%s, pdev = %p (%p)\n", __func__,
+ pdev, &pdev);
+
+ /* platform data is the pci device for all of them */
+ for (i = 0; i < ARRAY_SIZE(sta2x11_mfd_bar0); i++) {
+ sta2x11_mfd_bar0[i].pdata_size = sizeof(pdev);
+ sta2x11_mfd_bar0[i].platform_data = &pdev;
+ }
+ sta2x11_mfd_bar1[0].pdata_size = sizeof(pdev);
+ sta2x11_mfd_bar1[0].platform_data = &pdev;
+
+ /* Record this pdev before mfd_add_devices: their probe looks for it */
+ sta2x11_mfd_add(pdev, GFP_ATOMIC);
+
+
+ err = mfd_add_devices(&pdev->dev, -1,
+ sta2x11_mfd_bar0,
+ ARRAY_SIZE(sta2x11_mfd_bar0),
+ &pdev->resource[0],
+ 0);
+ if (err) {
+ dev_err(&pdev->dev, "mfd_add_devices[0] failed: %d\n", err);
+ goto err_disable;
+ }
+
+ err = mfd_add_devices(&pdev->dev, -1,
+ sta2x11_mfd_bar1,
+ ARRAY_SIZE(sta2x11_mfd_bar1),
+ &pdev->resource[1],
+ 0);
+ if (err) {
+ dev_err(&pdev->dev, "mfd_add_devices[1] failed: %d\n", err);
+ goto err_disable;
+ }
+
+ return 0;
+
+err_disable:
+ mfd_remove_devices(&pdev->dev);
+ pci_disable_device(pdev);
+ pci_disable_msi(pdev);
+ return err;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(sta2x11_mfd_tbl) = {
+ {PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_GPIO)},
+ {0,},
+};
+
+static struct pci_driver sta2x11_mfd_driver = {
+ .name = "sta2x11-mfd",
+ .id_table = sta2x11_mfd_tbl,
+ .probe = sta2x11_mfd_probe,
+ .suspend = sta2x11_mfd_suspend,
+ .resume = sta2x11_mfd_resume,
+};
+
+static int __init sta2x11_mfd_init(void)
+{
+ pr_info("%s\n", __func__);
+ return pci_register_driver(&sta2x11_mfd_driver);
+}
+
+/*
+ * All of this must be ready before "normal" devices like MMCI appear.
+ * But MFD (the pci device) can't be too early. The following choice
+ * prepares platform drivers very early and probe the PCI device later,
+ * but before other PCI devices.
+ */
+subsys_initcall(sta2x11_apbreg_init);
+subsys_initcall(sta2x11_sctl_init);
+rootfs_initcall(sta2x11_mfd_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Wind River");
+MODULE_DESCRIPTION("STA2x11 mfd for GPIO, SCTL and APBREG");
+MODULE_DEVICE_TABLE(pci, sta2x11_mfd_tbl);
diff --git a/include/linux/mfd/sta2x11-mfd.h b/include/linux/mfd/sta2x11-mfd.h
new file mode 100644
index 0000000..d179227
--- /dev/null
+++ b/include/linux/mfd/sta2x11-mfd.h
@@ -0,0 +1,324 @@
+/*
+ * Copyright (c) 2009-2011 Wind River Systems, Inc.
+ * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * The STMicroelectronics ConneXt (STA2X11) chip has several unrelated
+ * functions in one PCI endpoint functions. This driver simply
+ * registers the platform devices in this iomemregion and exports a few
+ * functions to access common registers
+ */
+
+#ifndef __STA2X11_MFD_H
+#define __STA2X11_MFD_H
+#include <linux/types.h>
+#include <linux/pci.h>
+
+/*
+ * The MFD PCI block includes the GPIO peripherals and other register blocks.
+ * For GPIO, we have 32*4 bits (I use "gsta" for "gpio sta2x11".)
+ */
+#define GSTA_GPIO_PER_BLOCK 32
+#define GSTA_NR_BLOCKS 4
+#define GSTA_NR_GPIO (GSTA_GPIO_PER_BLOCK * GSTA_NR_BLOCKS)
+
+/* Pinconfig is set by the board definition: altfunc, pull-up, pull-down */
+struct sta2x11_gpio_pdata {
+ unsigned pinconfig[GSTA_NR_GPIO];
+};
+
+/* Macros below lifted from sh_pfc.h, with minor differences */
+#define PINMUX_TYPE_NONE 0
+#define PINMUX_TYPE_FUNCTION 1
+#define PINMUX_TYPE_OUTPUT_LOW 2
+#define PINMUX_TYPE_OUTPUT_HIGH 3
+#define PINMUX_TYPE_INPUT 4
+#define PINMUX_TYPE_INPUT_PULLUP 5
+#define PINMUX_TYPE_INPUT_PULLDOWN 6
+
+/* Give names to GPIO pins, like PXA does, taken from the manual */
+#define STA2X11_GPIO0 0
+#define STA2X11_GPIO1 1
+#define STA2X11_GPIO2 2
+#define STA2X11_GPIO3 3
+#define STA2X11_GPIO4 4
+#define STA2X11_GPIO5 5
+#define STA2X11_GPIO6 6
+#define STA2X11_GPIO7 7
+#define STA2X11_GPIO8_RGBOUT_RED7 8
+#define STA2X11_GPIO9_RGBOUT_RED6 9
+#define STA2X11_GPIO10_RGBOUT_RED5 10
+#define STA2X11_GPIO11_RGBOUT_RED4 11
+#define STA2X11_GPIO12_RGBOUT_RED3 12
+#define STA2X11_GPIO13_RGBOUT_RED2 13
+#define STA2X11_GPIO14_RGBOUT_RED1 14
+#define STA2X11_GPIO15_RGBOUT_RED0 15
+#define STA2X11_GPIO16_RGBOUT_GREEN7 16
+#define STA2X11_GPIO17_RGBOUT_GREEN6 17
+#define STA2X11_GPIO18_RGBOUT_GREEN5 18
+#define STA2X11_GPIO19_RGBOUT_GREEN4 19
+#define STA2X11_GPIO20_RGBOUT_GREEN3 20
+#define STA2X11_GPIO21_RGBOUT_GREEN2 21
+#define STA2X11_GPIO22_RGBOUT_GREEN1 22
+#define STA2X11_GPIO23_RGBOUT_GREEN0 23
+#define STA2X11_GPIO24_RGBOUT_BLUE7 24
+#define STA2X11_GPIO25_RGBOUT_BLUE6 25
+#define STA2X11_GPIO26_RGBOUT_BLUE5 26
+#define STA2X11_GPIO27_RGBOUT_BLUE4 27
+#define STA2X11_GPIO28_RGBOUT_BLUE3 28
+#define STA2X11_GPIO29_RGBOUT_BLUE2 29
+#define STA2X11_GPIO30_RGBOUT_BLUE1 30
+#define STA2X11_GPIO31_RGBOUT_BLUE0 31
+#define STA2X11_GPIO32_RGBOUT_VSYNCH 32
+#define STA2X11_GPIO33_RGBOUT_HSYNCH 33
+#define STA2X11_GPIO34_RGBOUT_DEN 34
+#define STA2X11_GPIO35_ETH_CRS_DV 35
+#define STA2X11_GPIO36_ETH_TXD1 36
+#define STA2X11_GPIO37_ETH_TXD0 37
+#define STA2X11_GPIO38_ETH_TX_EN 38
+#define STA2X11_GPIO39_MDIO 39
+#define STA2X11_GPIO40_ETH_REF_CLK 40
+#define STA2X11_GPIO41_ETH_RXD1 41
+#define STA2X11_GPIO42_ETH_RXD0 42
+#define STA2X11_GPIO43_MDC 43
+#define STA2X11_GPIO44_CAN_TX 44
+#define STA2X11_GPIO45_CAN_RX 45
+#define STA2X11_GPIO46_MLB_DAT 46
+#define STA2X11_GPIO47_MLB_SIG 47
+#define STA2X11_GPIO48_SPI0_CLK 48
+#define STA2X11_GPIO49_SPI0_TXD 49
+#define STA2X11_GPIO50_SPI0_RXD 50
+#define STA2X11_GPIO51_SPI0_FRM 51
+#define STA2X11_GPIO52_SPI1_CLK 52
+#define STA2X11_GPIO53_SPI1_TXD 53
+#define STA2X11_GPIO54_SPI1_RXD 54
+#define STA2X11_GPIO55_SPI1_FRM 55
+#define STA2X11_GPIO56_SPI2_CLK 56
+#define STA2X11_GPIO57_SPI2_TXD 57
+#define STA2X11_GPIO58_SPI2_RXD 58
+#define STA2X11_GPIO59_SPI2_FRM 59
+#define STA2X11_GPIO60_I2C0_SCL 60
+#define STA2X11_GPIO61_I2C0_SDA 61
+#define STA2X11_GPIO62_I2C1_SCL 62
+#define STA2X11_GPIO63_I2C1_SDA 63
+#define STA2X11_GPIO64_I2C2_SCL 64
+#define STA2X11_GPIO65_I2C2_SDA 65
+#define STA2X11_GPIO66_I2C3_SCL 66
+#define STA2X11_GPIO67_I2C3_SDA 67
+#define STA2X11_GPIO68_MSP0_RCK 68
+#define STA2X11_GPIO69_MSP0_RXD 69
+#define STA2X11_GPIO70_MSP0_RFS 70
+#define STA2X11_GPIO71_MSP0_TCK 71
+#define STA2X11_GPIO72_MSP0_TXD 72
+#define STA2X11_GPIO73_MSP0_TFS 73
+#define STA2X11_GPIO74_MSP0_SCK 74
+#define STA2X11_GPIO75_MSP1_CK 75
+#define STA2X11_GPIO76_MSP1_RXD 76
+#define STA2X11_GPIO77_MSP1_FS 77
+#define STA2X11_GPIO78_MSP1_TXD 78
+#define STA2X11_GPIO79_MSP2_CK 79
+#define STA2X11_GPIO80_MSP2_RXD 80
+#define STA2X11_GPIO81_MSP2_FS 81
+#define STA2X11_GPIO82_MSP2_TXD 82
+#define STA2X11_GPIO83_MSP3_CK 83
+#define STA2X11_GPIO84_MSP3_RXD 84
+#define STA2X11_GPIO85_MSP3_FS 85
+#define STA2X11_GPIO86_MSP3_TXD 86
+#define STA2X11_GPIO87_MSP4_CK 87
+#define STA2X11_GPIO88_MSP4_RXD 88
+#define STA2X11_GPIO89_MSP4_FS 89
+#define STA2X11_GPIO90_MSP4_TXD 90
+#define STA2X11_GPIO91_MSP5_CK 91
+#define STA2X11_GPIO92_MSP5_RXD 92
+#define STA2X11_GPIO93_MSP5_FS 93
+#define STA2X11_GPIO94_MSP5_TXD 94
+#define STA2X11_GPIO95_SDIO3_DAT3 95
+#define STA2X11_GPIO96_SDIO3_DAT2 96
+#define STA2X11_GPIO97_SDIO3_DAT1 97
+#define STA2X11_GPIO98_SDIO3_DAT0 98
+#define STA2X11_GPIO99_SDIO3_CLK 99
+#define STA2X11_GPIO100_SDIO3_CMD 100
+#define STA2X11_GPIO101 101
+#define STA2X11_GPIO102 102
+#define STA2X11_GPIO103 103
+#define STA2X11_GPIO104 104
+#define STA2X11_GPIO105_SDIO2_DAT3 105
+#define STA2X11_GPIO106_SDIO2_DAT2 106
+#define STA2X11_GPIO107_SDIO2_DAT1 107
+#define STA2X11_GPIO108_SDIO2_DAT0 108
+#define STA2X11_GPIO109_SDIO2_CLK 109
+#define STA2X11_GPIO110_SDIO2_CMD 110
+#define STA2X11_GPIO111 111
+#define STA2X11_GPIO112 112
+#define STA2X11_GPIO113 113
+#define STA2X11_GPIO114 114
+#define STA2X11_GPIO115_SDIO1_DAT3 115
+#define STA2X11_GPIO116_SDIO1_DAT2 116
+#define STA2X11_GPIO117_SDIO1_DAT1 117
+#define STA2X11_GPIO118_SDIO1_DAT0 118
+#define STA2X11_GPIO119_SDIO1_CLK 119
+#define STA2X11_GPIO120_SDIO1_CMD 120
+#define STA2X11_GPIO121 121
+#define STA2X11_GPIO122 122
+#define STA2X11_GPIO123 123
+#define STA2X11_GPIO124 124
+#define STA2X11_GPIO125_UART2_TXD 125
+#define STA2X11_GPIO126_UART2_RXD 126
+#define STA2X11_GPIO127_UART3_TXD 127
+
+/*
+ * The APB bridge has its own registers, needed by our users as well.
+ * They are accessed with the following read/mask/write function.
+ */
+u32 sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val);
+
+/* CAN and MLB */
+#define APBREG_BSR 0x00 /* Bridge Status Reg */
+#define APBREG_PAER 0x08 /* Peripherals Address Error Reg */
+#define APBREG_PWAC 0x20 /* Peripheral Write Access Control reg */
+#define APBREG_PRAC 0x40 /* Peripheral Read Access Control reg */
+#define APBREG_PCG 0x60 /* Peripheral Clock Gating Reg */
+#define APBREG_PUR 0x80 /* Peripheral Under Reset Reg */
+#define APBREG_EMU_PCG 0xA0 /* Emulator Peripheral Clock Gating Reg */
+
+#define APBREG_CAN (1 << 1)
+#define APBREG_MLB (1 << 3)
+
+/* SARAC */
+#define APBREG_BSR_SARAC 0x100 /* Bridge Status Reg */
+#define APBREG_PAER_SARAC 0x108 /* Peripherals Address Error Reg */
+#define APBREG_PWAC_SARAC 0x120 /* Peripheral Write Access Control reg */
+#define APBREG_PRAC_SARAC 0x140 /* Peripheral Read Access Control reg */
+#define APBREG_PCG_SARAC 0x160 /* Peripheral Clock Gating Reg */
+#define APBREG_PUR_SARAC 0x180 /* Peripheral Under Reset Reg */
+#define APBREG_EMU_PCG_SARAC 0x1A0 /* Emulator Peripheral Clock Gating Reg */
+
+#define APBREG_SARAC (1 << 2)
+
+/*
+ * The system controller has its own registers. Some of these are accessed
+ * by out users as well, using the following read/mask/write/function
+ */
+u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val);
+
+#define SCTL_SCCTL 0x00 /* System controller control register */
+#define SCTL_ARMCFG 0x04 /* ARM configuration register */
+#define SCTL_SCPLLCTL 0x08 /* PLL control status register */
+#define SCTL_SCPLLFCTRL 0x0c /* PLL frequency control register */
+#define SCTL_SCRESFRACT 0x10 /* PLL fractional input register */
+#define SCTL_SCRESCTRL1 0x14 /* Peripheral reset control 1 */
+#define SCTL_SCRESXTRL2 0x18 /* Peripheral reset control 2 */
+#define SCTL_SCPEREN0 0x1c /* Peripheral clock enable register 0 */
+#define SCTL_SCPEREN1 0x20 /* Peripheral clock enable register 1 */
+#define SCTL_SCPEREN2 0x24 /* Peripheral clock enable register 2 */
+#define SCTL_SCGRST 0x28 /* Peripheral global reset */
+#define SCTL_SCPCIPMCR1 0x30 /* PCI power management control 1 */
+#define SCTL_SCPCIPMCR2 0x34 /* PCI power management control 2 */
+#define SCTL_SCPCIPMSR1 0x38 /* PCI power management status 1 */
+#define SCTL_SCPCIPMSR2 0x3c /* PCI power management status 2 */
+#define SCTL_SCPCIPMSR3 0x40 /* PCI power management status 3 */
+#define SCTL_SCINTREN 0x44 /* Interrupt enable */
+#define SCTL_SCRISR 0x48 /* RAW interrupt status */
+#define SCTL_SCCLKSTAT0 0x4c /* Peripheral clocks status 0 */
+#define SCTL_SCCLKSTAT1 0x50 /* Peripheral clocks status 1 */
+#define SCTL_SCCLKSTAT2 0x54 /* Peripheral clocks status 2 */
+#define SCTL_SCRSTSTA 0x58 /* Reset status register */
+
+#define SCTL_SCRESCTRL1_USB_PHY_POR (1 << 0)
+#define SCTL_SCRESCTRL1_USB_OTG (1 << 1)
+#define SCTL_SCRESCTRL1_USB_HRST (1 << 2)
+#define SCTL_SCRESCTRL1_USB_PHY_HOST (1 << 3)
+#define SCTL_SCRESCTRL1_SATAII (1 << 4)
+#define SCTL_SCRESCTRL1_VIP (1 << 5)
+#define SCTL_SCRESCTRL1_PER_MMC0 (1 << 6)
+#define SCTL_SCRESCTRL1_PER_MMC1 (1 << 7)
+#define SCTL_SCRESCTRL1_PER_GPIO0 (1 << 8)
+#define SCTL_SCRESCTRL1_PER_GPIO1 (1 << 9)
+#define SCTL_SCRESCTRL1_PER_GPIO2 (1 << 10)
+#define SCTL_SCRESCTRL1_PER_GPIO3 (1 << 11)
+#define SCTL_SCRESCTRL1_PER_MTU0 (1 << 12)
+#define SCTL_SCRESCTRL1_KER_SPI0 (1 << 13)
+#define SCTL_SCRESCTRL1_KER_SPI1 (1 << 14)
+#define SCTL_SCRESCTRL1_KER_SPI2 (1 << 15)
+#define SCTL_SCRESCTRL1_KER_MCI0 (1 << 16)
+#define SCTL_SCRESCTRL1_KER_MCI1 (1 << 17)
+#define SCTL_SCRESCTRL1_PRE_HSI2C0 (1 << 18)
+#define SCTL_SCRESCTRL1_PER_HSI2C1 (1 << 19)
+#define SCTL_SCRESCTRL1_PER_HSI2C2 (1 << 20)
+#define SCTL_SCRESCTRL1_PER_HSI2C3 (1 << 21)
+#define SCTL_SCRESCTRL1_PER_MSP0 (1 << 22)
+#define SCTL_SCRESCTRL1_PER_MSP1 (1 << 23)
+#define SCTL_SCRESCTRL1_PER_MSP2 (1 << 24)
+#define SCTL_SCRESCTRL1_PER_MSP3 (1 << 25)
+#define SCTL_SCRESCTRL1_PER_MSP4 (1 << 26)
+#define SCTL_SCRESCTRL1_PER_MSP5 (1 << 27)
+#define SCTL_SCRESCTRL1_PER_MMC (1 << 28)
+#define SCTL_SCRESCTRL1_KER_MSP0 (1 << 29)
+#define SCTL_SCRESCTRL1_KER_MSP1 (1 << 30)
+#define SCTL_SCRESCTRL1_KER_MSP2 (1 << 31)
+
+#define SCTL_SCPEREN0_UART0 (1 << 0)
+#define SCTL_SCPEREN0_UART1 (1 << 1)
+#define SCTL_SCPEREN0_UART2 (1 << 2)
+#define SCTL_SCPEREN0_UART3 (1 << 3)
+#define SCTL_SCPEREN0_MSP0 (1 << 4)
+#define SCTL_SCPEREN0_MSP1 (1 << 5)
+#define SCTL_SCPEREN0_MSP2 (1 << 6)
+#define SCTL_SCPEREN0_MSP3 (1 << 7)
+#define SCTL_SCPEREN0_MSP4 (1 << 8)
+#define SCTL_SCPEREN0_MSP5 (1 << 9)
+#define SCTL_SCPEREN0_SPI0 (1 << 10)
+#define SCTL_SCPEREN0_SPI1 (1 << 11)
+#define SCTL_SCPEREN0_SPI2 (1 << 12)
+#define SCTL_SCPEREN0_I2C0 (1 << 13)
+#define SCTL_SCPEREN0_I2C1 (1 << 14)
+#define SCTL_SCPEREN0_I2C2 (1 << 15)
+#define SCTL_SCPEREN0_I2C3 (1 << 16)
+#define SCTL_SCPEREN0_SVDO_LVDS (1 << 17)
+#define SCTL_SCPEREN0_USB_HOST (1 << 18)
+#define SCTL_SCPEREN0_USB_OTG (1 << 19)
+#define SCTL_SCPEREN0_MCI0 (1 << 20)
+#define SCTL_SCPEREN0_MCI1 (1 << 21)
+#define SCTL_SCPEREN0_MCI2 (1 << 22)
+#define SCTL_SCPEREN0_MCI3 (1 << 23)
+#define SCTL_SCPEREN0_SATA (1 << 24)
+#define SCTL_SCPEREN0_ETHERNET (1 << 25)
+#define SCTL_SCPEREN0_VIC (1 << 26)
+#define SCTL_SCPEREN0_DMA_AUDIO (1 << 27)
+#define SCTL_SCPEREN0_DMA_SOC (1 << 28)
+#define SCTL_SCPEREN0_RAM (1 << 29)
+#define SCTL_SCPEREN0_VIP (1 << 30)
+#define SCTL_SCPEREN0_ARM (1 << 31)
+
+#define SCTL_SCPEREN1_UART0 (1 << 0)
+#define SCTL_SCPEREN1_UART1 (1 << 1)
+#define SCTL_SCPEREN1_UART2 (1 << 2)
+#define SCTL_SCPEREN1_UART3 (1 << 3)
+#define SCTL_SCPEREN1_MSP0 (1 << 4)
+#define SCTL_SCPEREN1_MSP1 (1 << 5)
+#define SCTL_SCPEREN1_MSP2 (1 << 6)
+#define SCTL_SCPEREN1_MSP3 (1 << 7)
+#define SCTL_SCPEREN1_MSP4 (1 << 8)
+#define SCTL_SCPEREN1_MSP5 (1 << 9)
+#define SCTL_SCPEREN1_SPI0 (1 << 10)
+#define SCTL_SCPEREN1_SPI1 (1 << 11)
+#define SCTL_SCPEREN1_SPI2 (1 << 12)
+#define SCTL_SCPEREN1_I2C0 (1 << 13)
+#define SCTL_SCPEREN1_I2C1 (1 << 14)
+#define SCTL_SCPEREN1_I2C2 (1 << 15)
+#define SCTL_SCPEREN1_I2C3 (1 << 16)
+#define SCTL_SCPEREN1_USB_PHY (1 << 17)
+
+#endif /* __STA2X11_MFD_H */
--
1.7.7.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/