Re: dramatic I/O slowdown after upgrading 2.6.38->3.0+

From: Michael Tokarev
Date: Tue Apr 10 2012 - 02:00:37 EST


On 10.04.2012 06:26, Dave Chinner wrote:

> Barriers. Turn them off, and see if that fixes your problem.

Thank you Dave for a hint. And nope, that's not it, not at all... ;)
While turning off barriers helps a tiny bit, to gain a few %% from
the huge slowdown, it does not cure the issue.

Meanwhile, I observed the following:

1) the issue persists on more recent kernels too, I tried 3.3
and it is also as slow as 3.0.

2) at least 2.6.38 kernel works fine, as fast as 2.6.32, I'll
try 2.6.39 next.

I updated $subject accordingly.

3) the most important thing I think: this is general I/O speed
issue. Here's why:

2.6.38:
# dd if=/dev/sdb of=/dev/null bs=1M iflag=direct count=100
100+0 records in
100+0 records out
104857600 bytes (105 MB) copied, 1.73126 s, 60.6 MB/s

3.0:
# dd if=/dev/sdb of=/dev/null bs=1M iflag=direct count=100
100+0 records in
100+0 records out
104857600 bytes (105 MB) copied, 29.4508 s, 3.6 MB/s

That's about 20 times difference on direct read from the
same - idle - device!!

Preparing for another bisect attempt, slowly.....

Thank you!

/mjt
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/