Re: [REGRESSION][PATCH] bpf_jit drops the ball on indirect negativemem references

From: Jan Seiffert
Date: Thu Mar 29 2012 - 08:27:00 EST

Eric Dumazet schrieb:
> On Wed, 2012-03-28 at 22:26 +0200, Jan Seiffert wrote:
> [snip]
>> Say you have a UDP socket, and you want to filter for bogus source
>> addresses (drop already in kernel to save the context switch).
>> To have only one bpf program for ipv4 and ipv6 (you have to checked
>> the same bogus v4 addresses in mapped space), there is a point where
>> it elegant to have a negative offset saved in the X register.
> Cool, thats a valid use, thanks.
>
>
> Problem is you slow down the jit in its normal use, for a very specific
> use.
>
> Please rework your patch so that absolute loads of positive offsets
> (known at compile time) dont have to test negative offsets at run time.
>
> You add two instructions per load, and thats not good.
>
> Something like :
>
> sk_load_word:
> .globl sk_load_word
>
> test %esi,%esi
> js bpf_slow_path_word_neg
>
> sk_load_word_positive_offset:
> .globl sk_load_word_positive_offset
>
> mov %r9d,%eax # hlen
> sub %esi,%eax # hlen - offset
> cmp $3,%eax
>
> ...
>
>
>
Ok, to keep the ball rolling here is a V2 with the changes you suggested:

Consider the following test program:

#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <pcap-bpf.h>

#define die(x) do {perror(x); return 1;} while (0)
struct bpf_insn udp_filter[] = {
/* 0 */ BPF_STMT(BPF_LDX|BPF_W|BPF_IMM, -1048576+(0)), /* leax net[0] */
/* 1 */ BPF_STMT(BPF_LD|BPF_B|BPF_IND, 0), /* ldb [x+0] */
/* 2 */ BPF_STMT(BPF_RET|BPF_A, 0), /* ret a */
};

int main(int argc, char *argv[])
{
char buf[512];
struct sockaddr_in addr;
struct bpf_program prg;
socklen_t addr_s;
ssize_t res;
int fd;

addr.sin_family = AF_INET;
addr.sin_port = htons(5000);
addr.sin_addr.s_addr = 0;
addr_s = sizeof(addr);
prg.bf_len = sizeof(udp_filter)/sizeof(udp_filter[0]);
prg.bf_insns = udp_filter;
if(-1 == (fd = socket(AF_INET, SOCK_DGRAM, 0)))
die("socket");
if(-1 == bind(fd, (struct sockaddr *)&addr, sizeof(addr)))
die("bind");
if(-1 == setsockopt(fd, SOL_SOCKET, SO_ATTACH_FILTER, &prg, sizeof(prg)))
die("setsockopt");
res = recvfrom(fd, buf, sizeof(buf), 0, (struct sockaddr *)&addr, &addr_s);
if(res != -1)
printf("packet received: %zi bytes\n", res);
else
die("recvfrom");
return 0;
}

when used with the bpf jit disabled works:
console 1 $ ./bpf
console 2 $ echo "hello" | nc -u localhost 5000
console 1: packet received: 6 bytes

When the bpf jit gets enabled (echo 100 >
/proc/sys/net/core/bpf_jit_enable) the same program stops working:
console 1 $ ./bpf
console 2 $ echo "hello" | nc -u localhost 5000
console 1:

The reason is that both jits (x86 and powerpc) do not handle negative
memory references like SKF_NET_OFF or SKF_LL_OFF, only the simple
ancillary data references are supported (by mapping to special
instructions).
In the case of an absolute reference, the jit aborts the translation
if a negative reference is seen, also a negative k on the indirect
load aborts the translation, but if X is negative to begin with, only
the error handler is reached at runtime which drops the whole packet.

I propose the following patch to fix this situation.
Lightly tested on x86, but the powerpc asm part is prop. wrong.


Signed-of-by: Jan Seiffert <kaffeemonster@xxxxxxxxxxxxxx>

diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
index af1ab5e..e9b57b3 100644
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -49,6 +49,10 @@
* Assembly helpers from arch/powerpc/net/bpf_jit.S:
*/
extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
+extern u8 sk_load_word_positive_offset[], sk_load_half_positive_offset[];
+extern u8 sk_load_byte_positive_offset[], sk_load_byte_msh_positive_offset[];
+extern u8 sk_load_word_negative_offset[], sk_load_half_negative_offset[];
+extern u8 sk_load_byte_negative_offset[], sk_load_byte_msh_negative_offset[];

#define FUNCTION_DESCR_SIZE 24

diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S
index ff4506e..e590aa5 100644
--- a/arch/powerpc/net/bpf_jit_64.S
+++ b/arch/powerpc/net/bpf_jit_64.S
@@ -31,14 +31,13 @@
* then branch directly to slow_path_XXX if required. (In fact, could
* load a spare GPR with the address of slow_path_generic and pass size
* as an argument, making the call site a mtlr, li and bllr.)
- *
- * Technically, the "is addr < 0" check is unnecessary & slowing down
- * the ABS path, as it's statically checked on generation.
*/
.globl sk_load_word
sk_load_word:
cmpdi r_addr, 0
- blt bpf_error
+ blt bpf_slow_path_word_neg
+ .globl sk_load_word_positive_offset
+sk_load_word_positive_offset:
/* Are we accessing past headlen? */
subi r_scratch1, r_HL, 4
cmpd r_scratch1, r_addr
@@ -51,7 +50,9 @@ sk_load_word:
.globl sk_load_half
sk_load_half:
cmpdi r_addr, 0
- blt bpf_error
+ blt bpf_slow_path_half_neg
+ .globl sk_load_half_positive_offset
+sk_load_half_positive_offset:
subi r_scratch1, r_HL, 2
cmpd r_scratch1, r_addr
blt bpf_slow_path_half
@@ -61,7 +62,9 @@ sk_load_half:
.globl sk_load_byte
sk_load_byte:
cmpdi r_addr, 0
- blt bpf_error
+ blt bpf_slow_path_byte_neg
+ .globl sk_load_byte_positive_offset
+sk_load_byte_positive_offset:
cmpd r_HL, r_addr
ble bpf_slow_path_byte
lbzx r_A, r_D, r_addr
@@ -69,22 +72,20 @@ sk_load_byte:

/*
* BPF_S_LDX_B_MSH: ldxb 4*([offset]&0xf)
- * r_addr is the offset value, already known positive
+ * r_addr is the offset value
*/
.globl sk_load_byte_msh
sk_load_byte_msh:
+ cmpdi r_addr, 0
+ blt bpf_slow_path_byte_msh_neg
+ .globl sk_load_byte_msh_positive_offset
+sk_load_byte_msh_positive_offset:
cmpd r_HL, r_addr
ble bpf_slow_path_byte_msh
lbzx r_X, r_D, r_addr
rlwinm r_X, r_X, 2, 32-4-2, 31-2
blr

-bpf_error:
- /* Entered with cr0 = lt */
- li r3, 0
- /* Generated code will 'blt epilogue', returning 0. */
- blr
-
/* Call out to skb_copy_bits:
* We'll need to back up our volatile regs first; we have
* local variable space at r1+(BPF_PPC_STACK_BASIC).
@@ -136,3 +137,85 @@ bpf_slow_path_byte_msh:
lbz r_X, BPF_PPC_STACK_BASIC+(2*8)(r1)
rlwinm r_X, r_X, 2, 32-4-2, 31-2
blr
+
+/* Call out to bpf_internal_load_pointer_neg_helper:
+ * We'll need to back up our volatile regs first; we have
+ * local variable space at r1+(BPF_PPC_STACK_BASIC).
+ * Allocate a new stack frame here to remain ABI-compliant in
+ * stashing LR.
+ */
+#define sk_negative_common(SIZE) \
+ mflr r0; \
+ std r0, 16(r1); \
+ /* R3 goes in parameter space of caller's frame */ \
+ std r_skb, (BPF_PPC_STACKFRAME+48)(r1); \
+ std r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \
+ std r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \
+ stdu r1, -BPF_PPC_SLOWPATH_FRAME(r1); \
+ /* R3 = r_skb, as passed */ \
+ mr r4, r_addr; \
+ li r5, SIZE; \
+ bl bpf_internal_load_pointer_neg_helper; \
+ /* R3 != 0 on success */ \
+ addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \
+ ld r0, 16(r1); \
+ ld r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \
+ ld r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \
+ mtlr r0; \
+ cmpldi r3, 0; \
+ beq bpf_error_slow; /* cr0 = EQ */ \
+ mr r_addr, r3; \
+ ld r_skb, (BPF_PPC_STACKFRAME+48)(r1); \
+ /* Great success! */
+
+bpf_slow_path_word_neg:
+ lis r_scratch1,-32 /* SKF_LL_OFF */
+ cmpd r_addr, r_scratch1 /* addr < SKF_* */
+ blt bpf_error /* cr0 = LT */
+ .globl sk_load_word_negative_offset
+sk_load_word_negative_offset:
+ sk_negative_common(4)
+ lwz r_A, 0(r_addr)
+ blr
+
+bpf_slow_path_half_neg:
+ lis r_scratch1,-32 /* SKF_LL_OFF */
+ cmpd r_addr, r_scratch1 /* addr < SKF_* */
+ blt bpf_error /* cr0 = LT */
+ .globl sk_load_half_negative_offset
+sk_load_half_negative_offset:
+ sk_negative_common(2)
+ lhz r_A, 0(r_addr)
+ blr
+
+bpf_slow_path_byte_neg:
+ lis r_scratch1,-32 /* SKF_LL_OFF */
+ cmpd r_addr, r_scratch1 /* addr < SKF_* */
+ blt bpf_error /* cr0 = LT */
+ .globl sk_load_byte_negative_offset
+sk_load_byte_negative_offset:
+ sk_negative_common(1)
+ lbz r_A, 0(r_addr)
+ blr
+
+bpf_slow_path_byte_msh_neg:
+ lis r_scratch1,-32 /* SKF_LL_OFF */
+ cmpd r_addr, r_scratch1 /* addr < SKF_* */
+ blt bpf_error /* cr0 = LT */
+ .globl sk_load_byte_msh_negative_offset
+sk_load_byte_msh_negative_offset:
+ sk_negative_common(1)
+ lbz r_X, 0(r_addr)
+ rlwinm r_X, r_X, 2, 32-4-2, 31-2
+ blr
+
+bpf_error_slow:
+ /* fabricate a cr0 = lt */
+ li r_scratch1, -1
+ cmpdi r_scratch1, 0
+bpf_error:
+ /* Entered with cr0 = lt */
+ li r3, 0
+ /* Generated code will 'blt epilogue', returning 0. */
+ blr
+
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index 73619d3..2dc8b14 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -127,6 +127,9 @@ static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
PPC_BLR();
}

+#define CHOOSE_LOAD_FUNC(K, func) \
+ ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
+
/* Assemble the body code between the prologue & epilogue. */
static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
struct codegen_context *ctx,
@@ -391,21 +394,16 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,

/*** Absolute loads from packet header/data ***/
case BPF_S_LD_W_ABS:
- func = sk_load_word;
+ func = CHOOSE_LOAD_FUNC(K, sk_load_word);
goto common_load;
case BPF_S_LD_H_ABS:
- func = sk_load_half;
+ func = CHOOSE_LOAD_FUNC(K, sk_load_half);
goto common_load;
case BPF_S_LD_B_ABS:
- func = sk_load_byte;
+ func = CHOOSE_LOAD_FUNC(K, sk_load_byte);
common_load:
- /*
- * Load from [K]. Reference with the (negative)
- * SKF_NET_OFF/SKF_LL_OFF offsets is unsupported.
- */
+ /* Load from [K]. */
ctx->seen |= SEEN_DATAREF;
- if ((int)K < 0)
- return -ENOTSUPP;
PPC_LI64(r_scratch1, func);
PPC_MTLR(r_scratch1);
PPC_LI32(r_addr, K);
@@ -429,7 +427,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
common_load_ind:
/*
* Load from [X + K]. Negative offsets are tested for
- * in the helper functions, and result in a 'ret 0'.
+ * in the helper functions.
*/
ctx->seen |= SEEN_DATAREF | SEEN_XREG;
PPC_LI64(r_scratch1, func);
@@ -443,13 +441,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
break;

case BPF_S_LDX_B_MSH:
- /*
- * x86 version drops packet (RET 0) when K<0, whereas
- * interpreter does allow K<0 (__load_pointer, special
- * ancillary data). common_load returns ENOTSUPP if K<0,
- * so we fall back to interpreter & filter works.
- */
- func = sk_load_byte_msh;
+ func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh);
goto common_load;
break;

diff --git a/arch/x86/net/bpf_jit.S b/arch/x86/net/bpf_jit.S
index 6687022..63ae130 100644
--- a/arch/x86/net/bpf_jit.S
+++ b/arch/x86/net/bpf_jit.S
@@ -18,17 +18,18 @@
* r9d : hlen = skb->len - skb->data_len
*/
#define SKBDATA %r8
+#define SKF_MAX_NEG_OFF $(-0x200000) /* SKF_LL_OFF from filter.h */

-sk_load_word_ind:
- .globl sk_load_word_ind
-
- add %ebx,%esi /* offset += X */
-# test %esi,%esi /* if (offset < 0) goto bpf_error; */
- js bpf_error
-
+ .p2align 1
sk_load_word:
.globl sk_load_word

+ test %esi,%esi
+ js bpf_slow_path_word_neg
+
+sk_load_word_positive_offset:
+ .globl sk_load_word_positive_offset
+
mov %r9d,%eax # hlen
sub %esi,%eax # hlen - offset
cmp $3,%eax
@@ -37,16 +38,16 @@ sk_load_word:
bswap %eax /* ntohl() */
ret

-
-sk_load_half_ind:
- .globl sk_load_half_ind
-
- add %ebx,%esi /* offset += X */
- js bpf_error
-
+ .p2align 1
sk_load_half:
.globl sk_load_half

+ test %esi,%esi
+ js bpf_slow_path_half_neg
+
+sk_load_half_positive_offset:
+ .globl sk_load_half_positive_offset
+
mov %r9d,%eax
sub %esi,%eax # hlen - offset
cmp $1,%eax
@@ -55,14 +56,16 @@ sk_load_half:
rol $8,%ax # ntohs()
ret

-sk_load_byte_ind:
- .globl sk_load_byte_ind
- add %ebx,%esi /* offset += X */
- js bpf_error
-
+ .p2align 1
sk_load_byte:
.globl sk_load_byte

+ test %esi,%esi
+ js bpf_slow_path_byte_neg
+
+sk_load_byte_positive_offset:
+ .globl sk_load_byte_positive_offset
+
cmp %esi,%r9d /* if (offset >= hlen) goto bpf_slow_path_byte */
jle bpf_slow_path_byte
movzbl (SKBDATA,%rsi),%eax
@@ -73,25 +76,22 @@ sk_load_byte:
*
* Implements BPF_S_LDX_B_MSH : ldxb 4*([offset]&0xf)
* Must preserve A accumulator (%eax)
- * Inputs : %esi is the offset value, already known positive
+ * Inputs : %esi is the offset value
*/
-ENTRY(sk_load_byte_msh)
- CFI_STARTPROC
+ .p2align 1
+sk_load_byte_msh:
+ .globl sk_load_byte_msh
+ test %esi,%esi
+ js bpf_slow_path_byte_msh_neg
+
+sk_load_byte_msh_positive_offset:
+ .globl sk_load_byte_msh_positive_offset
cmp %esi,%r9d /* if (offset >= hlen) goto bpf_slow_path_byte_msh */
jle bpf_slow_path_byte_msh
movzbl (SKBDATA,%rsi),%ebx
and $15,%bl
shl $2,%bl
ret
- CFI_ENDPROC
-ENDPROC(sk_load_byte_msh)
-
-bpf_error:
-# force a return 0 from jit handler
- xor %eax,%eax
- mov -8(%rbp),%rbx
- leaveq
- ret

/* rsi contains offset and can be scratched */
#define bpf_slow_path_common(LEN) \
@@ -108,6 +108,7 @@ bpf_error:
pop %rdi


+ .p2align 1
bpf_slow_path_word:
bpf_slow_path_common(4)
js bpf_error
@@ -115,6 +116,7 @@ bpf_slow_path_word:
bswap %eax
ret

+ .p2align 1
bpf_slow_path_half:
bpf_slow_path_common(2)
js bpf_error
@@ -123,12 +125,14 @@ bpf_slow_path_half:
movzwl %ax,%eax
ret

+ .p2align 1
bpf_slow_path_byte:
bpf_slow_path_common(1)
js bpf_error
movzbl -12(%rbp),%eax
ret

+ .p2align 1
bpf_slow_path_byte_msh:
xchg %eax,%ebx /* dont lose A , X is about to be scratched */
bpf_slow_path_common(1)
@@ -138,3 +142,73 @@ bpf_slow_path_byte_msh:
shl $2,%al
xchg %eax,%ebx
ret
+
+#define sk_negative_common(SIZE) \
+ push %rdi; /* save skb */ \
+ push %r9; \
+ push SKBDATA; \
+/* rsi already has offset */ \
+ mov $SIZE,%ecx; /* size */ \
+ call bpf_internal_load_pointer_neg_helper; \
+ test %rax,%rax; \
+ pop SKBDATA; \
+ pop %r9; \
+ pop %rdi; \
+ jz bpf_error
+
+
+ .p2align 1
+bpf_slow_path_word_neg:
+ cmp SKF_MAX_NEG_OFF, %esi /* test range */
+ jl bpf_error /* offset lower -> error */
+sk_load_word_negative_offset:
+ .globl sk_load_word_negative_offset
+ sk_negative_common(4)
+ mov (%rax), %eax
+ bswap %eax
+ ret
+
+ .p2align 1
+bpf_slow_path_half_neg:
+ cmp SKF_MAX_NEG_OFF, %esi
+ jl bpf_error
+sk_load_half_negative_offset:
+ .globl sk_load_half_negative_offset
+ sk_negative_common(2)
+ mov (%rax),%ax
+ rol $8,%ax
+ movzwl %ax,%eax
+ ret
+
+ .p2align 1
+bpf_slow_path_byte_neg:
+ cmp SKF_MAX_NEG_OFF, %esi
+ jl bpf_error
+sk_load_byte_negative_offset:
+ .globl sk_load_byte_negative_offset
+ sk_negative_common(1)
+ movzbl (%rax), %eax
+ ret
+
+ .p2align 1
+bpf_slow_path_byte_msh_neg:
+ cmp SKF_MAX_NEG_OFF, %esi
+ jl bpf_error
+sk_load_byte_msh_negative_offset:
+ .globl sk_load_byte_msh_negative_offset
+ xchg %eax,%ebx /* dont lose A , X is about to be scratched */
+ sk_negative_common(1)
+ movzbl (%rax),%eax
+ and $15,%al
+ shl $2,%al
+ xchg %eax,%ebx
+ ret
+
+ .p2align 1
+bpf_error:
+# force a return 0 from jit handler
+ xor %eax,%eax
+ mov -8(%rbp),%rbx
+ leaveq
+ ret
+
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 5671752..c20374f 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -30,7 +30,10 @@ int bpf_jit_enable __read_mostly;
* assembly code in arch/x86/net/bpf_jit.S
*/
extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
-extern u8 sk_load_word_ind[], sk_load_half_ind[], sk_load_byte_ind[];
+extern u8 sk_load_word_positive_offset[], sk_load_half_positive_offset[];
+extern u8 sk_load_byte_positive_offset[], sk_load_byte_msh_positive_offset[];
+extern u8 sk_load_word_negative_offset[], sk_load_half_negative_offset[];
+extern u8 sk_load_byte_negative_offset[], sk_load_byte_msh_negative_offset[];

static inline u8 *emit_code(u8 *ptr, u32 bytes, unsigned int len)
{
@@ -117,6 +120,8 @@ static inline void bpf_flush_icache(void *start, void *end)
set_fs(old_fs);
}

+#define CHOOSE_LOAD_FUNC(K, func) \
+ ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)

void bpf_jit_compile(struct sk_filter *fp)
{
@@ -473,44 +478,42 @@ void bpf_jit_compile(struct sk_filter *fp)
#endif
break;
case BPF_S_LD_W_ABS:
- func = sk_load_word;
+ func = CHOOSE_LOAD_FUNC(K, sk_load_word);
common_load: seen |= SEEN_DATAREF;
- if ((int)K < 0) {
- /* Abort the JIT because __load_pointer() is needed. */
- goto out;
- }
t_offset = func - (image + addrs[i]);
EMIT1_off32(0xbe, K); /* mov imm32,%esi */
EMIT1_off32(0xe8, t_offset); /* call */
break;
case BPF_S_LD_H_ABS:
- func = sk_load_half;
+ func = CHOOSE_LOAD_FUNC(K, sk_load_half);
goto common_load;
case BPF_S_LD_B_ABS:
- func = sk_load_byte;
+ func = CHOOSE_LOAD_FUNC(K, sk_load_byte);
goto common_load;
case BPF_S_LDX_B_MSH:
- if ((int)K < 0) {
- /* Abort the JIT because __load_pointer() is needed. */
- goto out;
- }
+ func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh);
seen |= SEEN_DATAREF | SEEN_XREG;
- t_offset = sk_load_byte_msh - (image + addrs[i]);
+ t_offset = func - (image + addrs[i]);
EMIT1_off32(0xbe, K); /* mov imm32,%esi */
EMIT1_off32(0xe8, t_offset); /* call sk_load_byte_msh */
break;
case BPF_S_LD_W_IND:
- func = sk_load_word_ind;
+ func = sk_load_word;
common_load_ind: seen |= SEEN_DATAREF | SEEN_XREG;
t_offset = func - (image + addrs[i]);
- EMIT1_off32(0xbe, K); /* mov imm32,%esi */
+ if (K) {
+ EMIT2(0x8d, 0xb3); /* lea imm32(%rbx),%esi */
+ EMIT(K, 4);
+ } else {
+ EMIT2(0x89,0xde); /* mov %ebx,%esi */
+ }
EMIT1_off32(0xe8, t_offset); /* call sk_load_xxx_ind */
break;
case BPF_S_LD_H_IND:
- func = sk_load_half_ind;
+ func = sk_load_half;
goto common_load_ind;
case BPF_S_LD_B_IND:
- func = sk_load_byte_ind;
+ func = sk_load_byte;
goto common_load_ind;
case BPF_S_JMP_JA:
t_offset = addrs[i + K] - addrs[i];
diff --git a/net/core/filter.c b/net/core/filter.c
index 5dea452..04ca613 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -41,7 +41,7 @@
#include <linux/ratelimit.h>

/* No hurry in this branch */
-static void *__load_pointer(const struct sk_buff *skb, int k, unsigned int size)
+void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb, int k, unsigned int size)
{
u8 *ptr = NULL;

@@ -54,13 +54,14 @@ static void *__load_pointer(const struct sk_buff *skb, int k, unsigned int size)
return ptr;
return NULL;
}
+EXPORT_SYMBOL(bpf_internal_load_pointer_neg_helper);

static inline void *load_pointer(const struct sk_buff *skb, int k,
unsigned int size, void *buffer)
{
if (k >= 0)
return skb_header_pointer(skb, k, size, buffer);
- return __load_pointer(skb, k, size);
+ return bpf_internal_load_pointer_neg_helper(skb, k, size);
}

/**

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/