Re: [PATCH 02/23] PCI, sysfs: create rescan_bridge under/sys/.../pci/devices/... for pci bridges

From: Bjorn Helgaas
Date: Thu Mar 08 2012 - 19:52:25 EST


On Tue, Mar 6, 2012 at 12:13 AM, Yinghai Lu <yinghai@xxxxxxxxxx> wrote:
> Current code will create rescan for every pci device under parent bus.
> that is not right. the device is already there, there is no reason to rescan it.
>
> We could have rescan for pci bridges. less confusing.

Yes, but now we have *three* rescan attributes for a single bridge/bus:

/sys/devices/pci0000:00/0000:00:01.0/pci_bus/0000:01/rescan
/sys/devices/pci0000:00/0000:00:01.0/rescan_bridge
/sys/devices/pci0000:00/0000:00:01.0/rescan

and this for an endpoint:

/sys/devices/pci0000:00/0000:00:05.0/rescan

I think endpoints should not have a "rescan" attribute at all, and
bridges should have only a "rescan" attribute (not "rescan" and
"rescan_bridge").

I'm not sure about "pci_bus/.../rescan". I know you didn't add that,
but I'm not sure it makes sense to have both that and a "rescan" on
the bridge device. If we have both, what's the difference between
them?

> Need to move rescan attr to pci dev bridge attribute group.
> And We should rescan bridge's secondary bus instead of primary bus.
>
> -v3: Use device_type for pci dev.
> -v4: Seperate pci device type change out
> -v5: add rescan_bridge for bridge type, and still keep the old rescan.
>        may remove the old rescan later.
>
> Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
> Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> ---
>  Documentation/ABI/testing/sysfs-bus-pci |   10 ++++++++++
>  drivers/pci/pci-sysfs.c                 |   24 ++++++++++++++++++++++++
>  2 files changed, 34 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
> index 34f5110..95f0f37 100644
> --- a/Documentation/ABI/testing/sysfs-bus-pci
> +++ b/Documentation/ABI/testing/sysfs-bus-pci
> @@ -111,6 +111,16 @@ Description:
>                from this part of the device tree.
>                Depends on CONFIG_HOTPLUG.
>
> +What:          /sys/bus/pci/devices/.../rescan_bridge
> +Date:          February 2012
> +Contact:       Linux PCI developers <linux-pci@xxxxxxxxxxxxxxx>
> +Description:
> +               Writing a non-zero value to this attribute will
> +               force a rescan of the bridge and all child buses, and
> +               re-discover devices removed earlier from this part of
> +               the device tree.
> +               Depends on CONFIG_HOTPLUG.
> +
>  What:          /sys/bus/pci/devices/.../reset
>  Date:          July 2009
>  Contact:       Michael S. Tsirkin <mst@xxxxxxxxxx>
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 39d15e6..d5c8ffb 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -325,6 +325,27 @@ dev_rescan_store(struct device *dev, struct device_attribute *attr,
>        return count;
>  }
>
> +static ssize_t
> +dev_bridge_rescan_store(struct device *dev, struct device_attribute *attr,
> +                const char *buf, size_t count)
> +{
> +       unsigned long val;
> +       struct pci_dev *pdev = to_pci_dev(dev);
> +
> +       if (kstrtoul(buf, 0, &val) < 0)
> +               return -EINVAL;
> +
> +       if (val) {
> +               mutex_lock(&pci_remove_rescan_mutex);
> +               pci_rescan_bus(pdev->subordinate);
> +               mutex_unlock(&pci_remove_rescan_mutex);
> +       }
> +       return count;
> +}
> +
> +static struct device_attribute pci_dev_bridge_rescan_attr =
> +       __ATTR(rescan_bridge, (S_IWUSR|S_IWGRP), NULL, dev_bridge_rescan_store);
> +
>  static void remove_callback(struct device *dev)
>  {
>        struct pci_dev *pdev = to_pci_dev(dev);
> @@ -1337,6 +1358,9 @@ static int __init pci_sysfs_init(void)
>  late_initcall(pci_sysfs_init);
>
>  static struct attribute *pci_dev_bridge_attrs[] = {
> +#ifdef CONFIG_HOTPLUG
> +       &pci_dev_bridge_rescan_attr.attr,
> +#endif
>        NULL,
>  };
>
> --
> 1.7.7
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/