[PATCH 1/2] powerpc/44x: Fix PCI MSI support for APM821xx SoC and Bluestone board

[Mai La]

This patch consists of:
- Enable PCI MSI as default for Bluestone board 
- Define number of MSI interrupt for Maui APM821xx
- Fix returning ENODEV as finding MSI node
- Fix MSI physical high and low address
- Keep MSI data logically

Signed-off-by: Mai La <mla@xxxxxxx>
---
 arch/powerpc/platforms/44x/Kconfig |    2 ++
 arch/powerpc/sysdev/ppc4xx_msi.c   |   28 ++++++++++++++++++----------
 2 files changed, 20 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index fcf6bf2..9f04ce3 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -23,6 +23,8 @@ config BLUESTONE
 	default n
 	select PPC44x_SIMPLE
 	select APM821xx
+	select PCI_MSI
+	select PPC4xx_MSI
 	select IBM_EMAC_RGMII
 	help
 	  This option enables support for the APM APM821xx Evaluation board.
diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c b/arch/powerpc/sysdev/ppc4xx_msi.c
index 1c2d7af..6103908 100644
--- a/arch/powerpc/sysdev/ppc4xx_msi.c
+++ b/arch/powerpc/sysdev/ppc4xx_msi.c
@@ -31,7 +31,7 @@
 #include <asm/prom.h>
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
-#include <boot/dcr.h>
+#include <asm/dcr.h>
 #include <asm/dcr-regs.h>
 #include <asm/msi_bitmap.h>
 
@@ -43,7 +43,12 @@
 #define PEIH_FLUSH0	0x30
 #define PEIH_FLUSH1	0x38
 #define PEIH_CNTRST	0x48
+
+#ifdef CONFIG_APM821xx
+#define NR_MSI_IRQS	8
+#else
 #define NR_MSI_IRQS	4
+#endif
 
 struct ppc4xx_msi {
 	u32 msi_addr_lo;
@@ -150,12 +155,11 @@ static int ppc4xx_setup_pcieh_hw(struct platform_device *dev,
 	if (!sdr_addr)
 		return -1;
 
-	SDR0_WRITE(sdr_addr, (u64)res.start >> 32);	 /*HIGH addr */
-	SDR0_WRITE(sdr_addr + 1, res.start & 0xFFFFFFFF); /* Low addr */
-
+	mtdcri(SDR0, *sdr_addr, res.start >> 32);	/*HIGH addr */
+	mtdcri(SDR0, *sdr_addr + 1, res.start & 0xFFFFFFFF);/* Low addr */
 
 	msi->msi_dev = of_find_node_by_name(NULL, "ppc4xx-msi");
-	if (msi->msi_dev)
+	if (!msi->msi_dev)
 		return -ENODEV;
 
 	msi->msi_regs = of_iomap(msi->msi_dev, 0);
@@ -167,9 +171,12 @@ static int ppc4xx_setup_pcieh_hw(struct platform_device *dev,
 		(u32) (msi->msi_regs + PEIH_TERMADH), (u32) (msi->msi_regs));
 
 	msi_virt = dma_alloc_coherent(&dev->dev, 64, &msi_phys, GFP_KERNEL);
-	msi->msi_addr_hi = 0x0;
-	msi->msi_addr_lo = (u32) msi_phys;
-	dev_dbg(&dev->dev, "PCIE-MSI: msi address 0x%x\n", msi->msi_addr_lo);
+	if (!msi_virt)
+		return -ENOMEM;
+	msi->msi_addr_hi = (u32)(msi_phys >> 32);
+	msi->msi_addr_lo = (u32)(msi_phys & 0xffffffff);
+	dev_dbg(&dev->dev, "PCIE-MSI: msi address high 0x%x, low 0x%x\n",
+		msi->msi_addr_hi, msi->msi_addr_lo);
 
 	/* Progam the Interrupt handler Termination addr registers */
 	out_be32(msi->msi_regs + PEIH_TERMADH, msi->msi_addr_hi);
@@ -185,6 +192,8 @@ static int ppc4xx_setup_pcieh_hw(struct platform_device *dev,
 	out_be32(msi->msi_regs + PEIH_MSIED, *msi_data);
 	out_be32(msi->msi_regs + PEIH_MSIMK, *msi_mask);
 
+	dma_free_coherent(&dev->dev, 64, msi_virt, msi_phys);
+
 	return 0;
 }
 
@@ -215,8 +224,6 @@ static int __devinit ppc4xx_msi_probe(struct platform_device *dev)
 	struct resource res;
 	int err = 0;
 
-	msi = &ppc4xx_msi;/*keep the msi data for further use*/
-
 	dev_dbg(&dev->dev, "PCIE-MSI: Setting up MSI support...\n");
 
 	msi = kzalloc(sizeof(struct ppc4xx_msi), GFP_KERNEL);
@@ -242,6 +249,7 @@ static int __devinit ppc4xx_msi_probe(struct platform_device *dev)
 		dev_err(&dev->dev, "Error allocating MSI bitmap\n");
 		goto error_out;
 	}
+	ppc4xx_msi = *msi;
 
 	ppc_md.setup_msi_irqs = ppc4xx_setup_msi_irqs;
 	ppc_md.teardown_msi_irqs = ppc4xx_teardown_msi_irqs;
-- 
1.7.3.4

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, 
is for the sole use of the intended recipient(s) and contains information 
that is confidential and proprietary to AppliedMicro Corporation or its subsidiaries. 
It is to be used solely for the purpose of furthering the parties' business relationship. 
All unauthorized review, use, disclosure or distribution is prohibited. 
If you are not the intended recipient, please contact the sender by reply e-mail 
and destroy all copies of the original message.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/