Re: [PATCH v6 0/2] patch set about the MXS-DMA

From: Huang Shijie
Date: Tue Feb 28 2012 - 22:08:29 EST


Hi:

ping.

Any comment about this patch set?

thanks
Huang Shijie
> patch 1: move the mxs dma header to a more common place.
> Beside the mx23/mx28, the apbh-dma is also used by MX50 and MX6Q.
> So move the mxs dma header file to a more common place, and rename
> it to mxs-dma.h
>
> patch 2: rewrite the last parameter of mxs_dma_prep_slave_sg().
> In the new GPMI version, some hardware behavior changes.
> The WAIT4END bit should be set in the middle one of the ECC READ page DMA chain.
> The DMA chain should be set like this:
>
> +-----+ +-----+ +-----+
> | cmd | ------------> | cmd | ------------------> | cmd |
> +-----+ +-----+ +-----+
> ^ ^
> | |
> | |
> set WAIT4END here too set WAIT4END here
>
> So rewrite the last parameter of mxs_dma_prep_slave_sg(), use the
> dma_ctrl_flags to set the proper DMA bit for DMA Command Structure.
> And change the relative drivers with the dma_ctrl_flags.
>
> TEST:
> Tested the mxs-mmc driver and gpmi-nand drive with the two patches
> in MX28 board.
>
> v5 --> v6:
> [1] create this patch set based on the mainline.
>
> v4 --> v5:
> [1] remove GPMI_IS_MX6Q(), make the mxs and mx6q use the same code.
>
> v3 --> v4:
> [1] create a new folder include/linux/fsl/ for store the Freescale's
> header files.
> [2] add more CCs.
>
> v2 --> v3:
> [1] remove field gpmi_version, use GPMI_IS_MX6Q() instead.
>
> v1 --> v2:
> [1] squash the trial patches into single patch.
> [2] use the dma_ctrl_flags.
>
>
> Huang Shijie (2):
> mxs-dma : move the mxs dma.h to a more common place
> mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()
>
> drivers/dma/mxs-dma.c | 34 +++++++++++++++++---
> drivers/mmc/host/mxs-mmc.c | 12 +++---
> drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 19 +++++++---
> drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 2 +-
> .../mach/dma.h => include/linux/fsl/mxs-dma.h | 0
> sound/soc/mxs/mxs-pcm.c | 2 +-
> sound/soc/mxs/mxs-pcm.h | 2 +-
> sound/soc/mxs/mxs-saif.c | 2 +-
> 8 files changed, 52 insertions(+), 21 deletions(-)
> rename arch/arm/mach-mxs/include/mach/dma.h => include/linux/fsl/mxs-dma.h (100%)
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/