Re: mmc sdhci mmcblk0: error -110 sending status command, retrying

[Jeff Chua]

On Mon, Feb 13, 2012 at 1:20 PM, Jeff Chua <jeff.chua.linux@xxxxxxxxx> wrote:
> On Mon, Feb 13, 2012 at 1:16 PM, Jeff Chua <jeff.chua.linux@xxxxxxxxx> wrote:
>> On Mon, Feb 13, 2012 at 12:41 PM, Jeff Chua <jeff.chua.linux@xxxxxxxxx> wrote:
>>> I ran tests for frequency that works dd out 1G of data from 8MHz to
>>> 16MHz, and it seems frequency less than 8.4MHz can only transfer at
>>> rate of 14.3MB/s and above 8.4MHz, speed goes up to 18.3 MB/s. Above
>>> 17MHz, errors encounters.
>>>
>>> hz1  8000000  73.5029 s  14.3 MB/s
>>> hz2  8000000  73.4740 s  14.3 MB/s
>>> hz3  8000000  73.3982 s  14.3 MB/s
>>> hz1  8200000  71.9677 s  14.6 MB/s
>>> hz2  8200000  73.4936 s  14.3 MB/s
>>> hz3  8200000  73.3462 s  14.3 MB/s
>>> hz1  8400000  56.6296 s  18.5 MB/s
>>> hz2  8400000  56.7616 s  18.5 MB/s
>>> hz3  8400000  56.7926 s  18.5 MB/s
>>> hz1  8600000  56.6622 s  18.5 MB/s
>>> hz2  8600000  56.7201 s  18.5 MB/s
>>> hz3  8600000  56.6476 s  18.5 MB/s
>>> hz1  8800000  56.8846 s  18.4 MB/s
>>> hz2  8800000  56.8226 s  18.5 MB/s
>>> hz3  8800000  56.7070 s  18.5 MB/s
>>
>> I've turned on write, and there's no error writing. But speed is
>> slower than accessing it via USB2 SD card reader. Same SD.
>>
>
> Via SD PCI
> 18.779 sec  4.04 %cpu
>
> Via USB2.0 Card Reader
> 12.205 sec  2.04 %cpu
>
> Via USB3.0 Card Reader
> 11.427 sec  2.01 %cpu
>
>
> Shouldn't PCI SD be faster? Same SD used for all tests.


Are there any thoughts on this or I should give up hope on the SD :((
Or is there something else I should try?


Thanks,
Jeff
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/