[54/65] net: bpf_jit: fix divide by 0 generation

From: Greg KH
Date: Wed Feb 01 2012 - 16:43:28 EST


3.0-stable review patch. If anyone has any objections, please let me know.

------------------


From: Eric Dumazet <eric.dumazet@xxxxxxxxx>

[ Upstream commit d00a9dd21bdf7908b70866794c8313ee8a5abd5c ]

Several problems fixed in this patch :

1) Target of the conditional jump in case a divide by 0 is performed
by a bpf is wrong.

2) Must 'generate' the full function prologue/epilogue at pass=0,
or else we can stop too early in pass=1 if the proglen doesnt change.
(if the increase of prologue/epilogue equals decrease of all
instructions length because some jumps are converted to near jumps)

3) Change the wrong length detection at the end of code generation to
issue a more explicit message, no need for a full stack trace.

Reported-by: Phil Oester <kernel@xxxxxxxxxxxx>
Signed-off-by: Eric Dumazet <eric.dumazet@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/x86/net/bpf_jit_comp.c | 36 ++++++++++++++++++++++--------------
1 file changed, 22 insertions(+), 14 deletions(-)

--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -151,17 +151,18 @@ void bpf_jit_compile(struct sk_filter *f
cleanup_addr = proglen; /* epilogue address */

for (pass = 0; pass < 10; pass++) {
+ u8 seen_or_pass0 = (pass == 0) ? (SEEN_XREG | SEEN_DATAREF | SEEN_MEM) : seen;
/* no prologue/epilogue for trivial filters (RET something) */
proglen = 0;
prog = temp;

- if (seen) {
+ if (seen_or_pass0) {
EMIT4(0x55, 0x48, 0x89, 0xe5); /* push %rbp; mov %rsp,%rbp */
EMIT4(0x48, 0x83, 0xec, 96); /* subq $96,%rsp */
/* note : must save %rbx in case bpf_error is hit */
- if (seen & (SEEN_XREG | SEEN_DATAREF))
+ if (seen_or_pass0 & (SEEN_XREG | SEEN_DATAREF))
EMIT4(0x48, 0x89, 0x5d, 0xf8); /* mov %rbx, -8(%rbp) */
- if (seen & SEEN_XREG)
+ if (seen_or_pass0 & SEEN_XREG)
CLEAR_X(); /* make sure we dont leek kernel memory */

/*
@@ -170,7 +171,7 @@ void bpf_jit_compile(struct sk_filter *f
* r9 = skb->len - skb->data_len
* r8 = skb->data
*/
- if (seen & SEEN_DATAREF) {
+ if (seen_or_pass0 & SEEN_DATAREF) {
if (offsetof(struct sk_buff, len) <= 127)
/* mov off8(%rdi),%r9d */
EMIT4(0x44, 0x8b, 0x4f, offsetof(struct sk_buff, len));
@@ -260,9 +261,14 @@ void bpf_jit_compile(struct sk_filter *f
case BPF_S_ALU_DIV_X: /* A /= X; */
seen |= SEEN_XREG;
EMIT2(0x85, 0xdb); /* test %ebx,%ebx */
- if (pc_ret0 != -1)
- EMIT_COND_JMP(X86_JE, addrs[pc_ret0] - (addrs[i] - 4));
- else {
+ if (pc_ret0 > 0) {
+ /* addrs[pc_ret0 - 1] is start address of target
+ * (addrs[i] - 4) is the address following this jmp
+ * ("xor %edx,%edx; div %ebx" being 4 bytes long)
+ */
+ EMIT_COND_JMP(X86_JE, addrs[pc_ret0 - 1] -
+ (addrs[i] - 4));
+ } else {
EMIT_COND_JMP(X86_JNE, 2 + 5);
CLEAR_A();
EMIT1_off32(0xe9, cleanup_addr - (addrs[i] - 4)); /* jmp .+off32 */
@@ -335,12 +341,12 @@ void bpf_jit_compile(struct sk_filter *f
}
/* fallinto */
case BPF_S_RET_A:
- if (seen) {
+ if (seen_or_pass0) {
if (i != flen - 1) {
EMIT_JMP(cleanup_addr - addrs[i]);
break;
}
- if (seen & SEEN_XREG)
+ if (seen_or_pass0 & SEEN_XREG)
EMIT4(0x48, 0x8b, 0x5d, 0xf8); /* mov -8(%rbp),%rbx */
EMIT1(0xc9); /* leaveq */
}
@@ -483,8 +489,9 @@ common_load: seen |= SEEN_DATAREF;
goto common_load;
case BPF_S_LDX_B_MSH:
if ((int)K < 0) {
- if (pc_ret0 != -1) {
- EMIT_JMP(addrs[pc_ret0] - addrs[i]);
+ if (pc_ret0 > 0) {
+ /* addrs[pc_ret0 - 1] is the start address */
+ EMIT_JMP(addrs[pc_ret0 - 1] - addrs[i]);
break;
}
CLEAR_A();
@@ -599,13 +606,14 @@ cond_branch: f_offset = addrs[i + filt
* use it to give the cleanup instruction(s) addr
*/
cleanup_addr = proglen - 1; /* ret */
- if (seen)
+ if (seen_or_pass0)
cleanup_addr -= 1; /* leaveq */
- if (seen & SEEN_XREG)
+ if (seen_or_pass0 & SEEN_XREG)
cleanup_addr -= 4; /* mov -8(%rbp),%rbx */

if (image) {
- WARN_ON(proglen != oldproglen);
+ if (proglen != oldproglen)
+ pr_err("bpb_jit_compile proglen=%u != oldproglen=%u\n", proglen, oldproglen);
break;
}
if (proglen == oldproglen) {


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/