[PATCH 3/3] cpupower tool: allow to build in a separate directory

From: Franck Bui-Huu
Date: Wed Feb 01 2012 - 06:08:32 EST

Next message: Will Deacon: "Re: [PATCH v2 3/8] ARM: tegra: rework Tegra secondary CPU corebringup"
Previous message: Franck Bui-Huu: "[PATCH 2/3] cpupower tool: makefile: simplify the recipe used to generate cpupower.pot target"
In reply to: Franck Bui-Huu: "[PATCH 2/3] cpupower tool: makefile: simplify the recipe used to generate cpupower.pot target"
Next in thread: Dominik Brodowski: "Re: [PATCH 0/3] cpupower tool: allow building output to be in aseparate directory"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This patch allows cpupower tool to generate its output files in a
seperate directory. This is now possible by passing the 'O=<path>' to
the command line.

This can be usefull for a normal user if the kernel source code is
located a in read only location.

This is patch stole some bits of the perf makefile.

Signed-off-by: Franck Bui-Huu <fbuihuu@xxxxxxxxx>
---
tools/power/cpupower/Makefile | 87 ++++++++++++++++++++++------------
tools/power/cpupower/bench/Makefile | 23 ++++++---
2 files changed, 71 insertions(+), 39 deletions(-)

diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index f1fe491..9b7725a 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -19,6 +19,16 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
+OUTPUT=./
+ifeq ("$(origin O)", "command line")
+ OUTPUT := $(O)/
+endif
+
+ifneq ($(OUTPUT),)
+# check that the output directory actually exists
+OUTDIR := $(shell cd $(OUTPUT) && /bin/pwd)
+$(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist))
+endif

# --- CONFIGURATION BEGIN ---

@@ -87,6 +97,7 @@ AR = $(CROSS)ar
STRIP = $(CROSS)strip
RANLIB = $(CROSS)ranlib
HOSTCC = gcc
+MKDIR = mkdir

# Now we set up the build system
@@ -95,7 +106,7 @@ HOSTCC = gcc
# set up PWD so that older versions of make will work with our build.
PWD = $(shell pwd)

-GMO_FILES = ${shell for HLANG in ${LANGUAGES}; do echo po/$$HLANG.gmo; done;}
+GMO_FILES = ${shell for HLANG in ${LANGUAGES}; do echo $(OUTPUT)po/$$HLANG.gmo; done;}

export CROSS CC AR STRIP RANLIB CFLAGS LDFLAGS LIB_OBJS

@@ -122,15 +133,18 @@ UTIL_OBJS = utils/helpers/amd.o utils/helpers/topology.o utils/helpers/msr.o \
utils/cpupower.o utils/cpufreq-info.o utils/cpufreq-set.o \
utils/cpupower-set.o utils/cpupower-info.o utils/cpuidle-info.o

+UTIL_SRC := $(UTIL_OBJS:.o=.c)
+
+UTIL_OBJS := $(addprefix $(OUTPUT),$(UTIL_OBJS))
+
UTIL_HEADERS = utils/helpers/helpers.h utils/idle_monitor/cpupower-monitor.h \
utils/helpers/bitmask.h \
utils/idle_monitor/idle_monitors.h utils/idle_monitor/idle_monitors.def

-UTIL_SRC := $(UTIL_OBJS:.o=.c)
-
LIB_HEADERS = lib/cpufreq.h lib/sysfs.h
LIB_SRC = lib/cpufreq.c lib/sysfs.c
LIB_OBJS = lib/cpufreq.o lib/sysfs.o
+LIB_OBJS := $(addprefix $(OUTPUT),$(LIB_OBJS))

CFLAGS += -pipe

@@ -168,79 +182,90 @@ endif

# the actual make rules

-all: libcpupower cpupower $(COMPILE_NLS) $(COMPILE_BENCH)
+all: libcpupower $(OUTPUT)cpupower $(COMPILE_NLS) $(COMPILE_BENCH)

-lib/%.o: $(LIB_SRC) $(LIB_HEADERS)
+$(OUTPUT)lib/%.o: $(LIB_SRC) $(LIB_HEADERS)
$(ECHO) " CC " $@
$(QUIET) $(CC) $(CFLAGS) -fPIC -o $@ -c lib/$*.c

-libcpupower.so.$(LIB_MAJ): $(LIB_OBJS)
+$(OUTPUT)libcpupower.so.$(LIB_MAJ): $(LIB_OBJS)
$(ECHO) " LD " $@
$(QUIET) $(CC) -shared $(CFLAGS) $(LDFLAGS) -o $@ \
-Wl,-soname,libcpupower.so.$(LIB_MIN) $(LIB_OBJS)
- @ln -sf $@ libcpupower.so
- @ln -sf $@ libcpupower.so.$(LIB_MIN)
+ @ln -sf $(@F) $(OUTPUT)libcpupower.so
+ @ln -sf $(@F) $(OUTPUT)libcpupower.so.$(LIB_MIN)

-libcpupower: libcpupower.so.$(LIB_MAJ)
+libcpupower: $(OUTPUT)libcpupower.so.$(LIB_MAJ)

# Let all .o files depend on its .c file and all headers
# Might be worth to put this into utils/Makefile at some point of time
$(UTIL_OBJS): $(UTIL_HEADERS)

-.c.o:
+$(OUTPUT)%.o: %.c
$(ECHO) " CC " $@
$(QUIET) $(CC) $(CFLAGS) -I./lib -I ./utils -o $@ -c $*.c

-cpupower: $(UTIL_OBJS) libcpupower.so.$(LIB_MAJ)
+$(OUTPUT)cpupower: $(UTIL_OBJS) $(OUTPUT)libcpupower.so.$(LIB_MAJ)
$(ECHO) " CC " $@
- $(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) -lcpupower -lrt -lpci -L. -o $@ $(UTIL_OBJS)
+ $(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) -lcpupower -lrt -lpci -L$(OUTPUT) -o $@ $(UTIL_OBJS)
$(QUIET) $(STRIPCMD) $@

-po/$(PACKAGE).pot: $(UTIL_SRC)
+$(OUTPUT)po/$(PACKAGE).pot: $(UTIL_SRC)
$(ECHO) " GETTEXT " $@
$(QUIET) xgettext --default-domain=$(PACKAGE) --add-comments \
--keyword=_ --keyword=N_ $(UTIL_SRC) -p $(@D) -o $(@F)

-po/%.gmo: po/%.po
+$(OUTPUT)po/%.gmo: po/%.po
$(ECHO) " MSGFMT " $@
$(QUIET) msgfmt -o $@ po/$*.po

create-gmo: ${GMO_FILES}

-update-po: po/$(PACKAGE).pot
+update-po: $(OUTPUT)po/$(PACKAGE).pot
$(ECHO) " MSGMRG " $@
$(QUIET) @for HLANG in $(LANGUAGES); do \
echo -n "Updating $$HLANG "; \
- if msgmerge po/$$HLANG.po po/$(PACKAGE).pot -o \
- po/$$HLANG.new.po; then \
- mv -f po/$$HLANG.new.po po/$$HLANG.po; \
+ if msgmerge po/$$HLANG.po $< -o \
+ $(OUTPUT)po/$$HLANG.new.po; then \
+ mv -f $(OUTPUT)po/$$HLANG.new.po $(OUTPUT)po/$$HLANG.po; \
else \
echo "msgmerge for $$HLANG failed!"; \
- rm -f po/$$HLANG.new.po; \
+ rm -f $(OUTPUT)po/$$HLANG.new.po; \
fi; \
done;

-compile-bench: libcpupower.so.$(LIB_MAJ)
- @V=$(V) confdir=$(confdir) $(MAKE) -C bench
+compile-bench: $(OUTPUT)libcpupower.so.$(LIB_MAJ)
+ @V=$(V) confdir=$(confdir) $(MAKE) -C bench O=$(OUTPUT)
+
+# we compile into subdirectories. if the target directory is not the
+# source directory, they might not exists. So we depend the various
+# files onto their directories.
+DIRECTORY_DEPS = $(LIB_OBJS) $(UTIL_OBJS) $(GMO_FILES)
+$(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS)))
+
+# In the second step, we make a rule to actually create these directories
+$(sort $(dir $(DIRECTORY_DEPS))):
+ $(ECHO) " MKDIR " $@
+ $(QUIET) $(MKDIR) -p $@ 2>/dev/null

clean:
- -find . $ -not -type d $ -and $ -name '*~' -o -name '*.[oas]' $ -type f -print \
+ -find $(OUTPUT) $ -not -type d $ -and $ -name '*~' -o -name '*.[oas]' $ -type f -print \
| xargs rm -f
- -rm -f cpupower
- -rm -f libcpupower.so*
- -rm -rf po/*.gmo po/*.pot
- $(MAKE) -C bench clean
+ -rm -f $(OUTPUT)cpupower
+ -rm -f $(OUTPUT)libcpupower.so*
+ -rm -rf $(OUTPUT)po/*.{gmo,pot}
+ $(MAKE) -C bench O=$(OUTPUT) clean

install-lib:
$(INSTALL) -d $(DESTDIR)${libdir}
- $(CP) libcpupower.so* $(DESTDIR)${libdir}/
+ $(CP) $(OUTPUT)libcpupower.so* $(DESTDIR)${libdir}/
$(INSTALL) -d $(DESTDIR)${includedir}
$(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h

install-tools:
$(INSTALL) -d $(DESTDIR)${bindir}
- $(INSTALL_PROGRAM) cpupower $(DESTDIR)${bindir}
+ $(INSTALL_PROGRAM) $(OUTPUT)cpupower $(DESTDIR)${bindir}

install-man:
$(INSTALL_DATA) -D man/cpupower.1 $(DESTDIR)${mandir}/man1/cpupower.1
@@ -253,13 +278,13 @@ install-man:
install-gmo:
$(INSTALL) -d $(DESTDIR)${localedir}
for HLANG in $(LANGUAGES); do \
- echo '$(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \
- $(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \
+ echo '$(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \
+ $(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \
done;

install-bench:
@#DESTDIR must be set from outside to survive
- @sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench install
+ @sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench O=$(OUTPUT) install

install: all install-lib install-tools install-man $(INSTALL_NLS) $(INSTALL_BENCH)

diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile
index 2b67606..7ec7021 100644
--- a/tools/power/cpupower/bench/Makefile
+++ b/tools/power/cpupower/bench/Makefile
@@ -1,29 +1,36 @@
-LIBS = -L../ -lm -lcpupower
+OUTPUT := ./
+ifeq ("$(origin O)", "command line")
+ifneq ($(O),)
+ OUTPUT := $(O)/
+endif
+endif

-OBJS = main.o parse.o system.o benchmark.o
+LIBS = -L../ -L$(OUTPUT) -lm -lcpupower
+
+OBJS = $(OUTPUT)main.o $(OUTPUT)parse.o $(OUTPUT)system.o $(OUTPUT)benchmark.o
CFLAGS += -D_GNU_SOURCE -I../lib -DDEFAULT_CONFIG_FILE=\"$(confdir)/cpufreq-bench.conf\"

-%.o : %.c
+$(OUTPUT)%.o : %.c
$(ECHO) " CC " $@
$(QUIET) $(CC) -c $(CFLAGS) $< -o $@

-cpufreq-bench: $(OBJS)
+$(OUTPUT)cpufreq-bench: $(OBJS)
$(ECHO) " CC " $@
$(QUIET) $(CC) -o $@ $(CFLAGS) $(OBJS) $(LIBS)

-all: cpufreq-bench
+all: $(OUTPUT)cpufreq-bench

install:
mkdir -p $(DESTDIR)/$(sbindir)
mkdir -p $(DESTDIR)/$(bindir)
mkdir -p $(DESTDIR)/$(docdir)
mkdir -p $(DESTDIR)/$(confdir)
- install -m 755 cpufreq-bench $(DESTDIR)/$(sbindir)/cpufreq-bench
+ install -m 755 $(OUTPUT)cpufreq-bench $(DESTDIR)/$(sbindir)/cpufreq-bench
install -m 755 cpufreq-bench_plot.sh $(DESTDIR)/$(bindir)/cpufreq-bench_plot.sh
install -m 644 README-BENCH $(DESTDIR)/$(docdir)/README-BENCH
install -m 755 cpufreq-bench_script.sh $(DESTDIR)/$(docdir)/cpufreq-bench_script.sh
install -m 644 example.cfg $(DESTDIR)/$(confdir)/cpufreq-bench.conf

clean:
- rm -f *.o
- rm -f cpufreq-bench
+ rm -f $(OUTPUT)*.o
+ rm -f $(OUTPUT)cpufreq-bench
--
1.7.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Will Deacon: "Re: [PATCH v2 3/8] ARM: tegra: rework Tegra secondary CPU corebringup"
Previous message: Franck Bui-Huu: "[PATCH 2/3] cpupower tool: makefile: simplify the recipe used to generate cpupower.pot target"
In reply to: Franck Bui-Huu: "[PATCH 2/3] cpupower tool: makefile: simplify the recipe used to generate cpupower.pot target"
Next in thread: Dominik Brodowski: "Re: [PATCH 0/3] cpupower tool: allow building output to be in aseparate directory"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]