[PATCH 1/6] ARM: at91/at91sam9x5: overall definition

From: Nicolas Ferre
Date: Thu Jan 26 2012 - 12:13:09 EST

From: Dan Liang <dan.liang@xxxxxxxxx>

Add the definitions of peripheral and system registers for sam9x5 chips family.

Signed-off-by: Dan Liang <dan.liang@xxxxxxxxx>
Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
---
arch/arm/mach-at91/include/mach/at91sam9x5.h | 80 ++++++++++++++++++++
.../arm/mach-at91/include/mach/at91sam9x5_matrix.h | 53 +++++++++++++
2 files changed, 133 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5.h
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h

diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
new file mode 100644
index 0000000..8476871
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -0,0 +1,80 @@
+/*
+ * Chip-specific header file for the AT91SAM9x5 family
+ *
+ * Copyright (C) 2009-2012 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9x5 datasheet.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef AT91SAM9X5_H
+#define AT91SAM9X5_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91SAM9X5_ID_PIOAB 2 /* Parallel I/O Controller A and B */
+#define AT91SAM9X5_ID_PIOCD 3 /* Parallel I/O Controller C and D */
+#define AT91SAM9X5_ID_SMD 4 /* SMD Soft Modem (SMD) */
+#define AT91SAM9X5_ID_USART0 5 /* USART 0 */
+#define AT91SAM9X5_ID_USART1 6 /* USART 1 */
+#define AT91SAM9X5_ID_USART2 7 /* USART 2 */
+#define AT91SAM9X5_ID_USART3 8 /* USART 3 */
+#define AT91SAM9X5_ID_TWI0 9 /* Two-Wire Interface 0 */
+#define AT91SAM9X5_ID_TWI1 10 /* Two-Wire Interface 1 */
+#define AT91SAM9X5_ID_TWI2 11 /* Two-Wire Interface 2 */
+#define AT91SAM9X5_ID_MCI0 12 /* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9X5_ID_SPI0 13 /* Serial Peripheral Interface 0 */
+#define AT91SAM9X5_ID_SPI1 14 /* Serial Peripheral Interface 1 */
+#define AT91SAM9X5_ID_UART0 15 /* UART 0 */
+#define AT91SAM9X5_ID_UART1 16 /* UART 1 */
+#define AT91SAM9X5_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9X5_ID_PWM 18 /* Pulse Width Modulation Controller */
+#define AT91SAM9X5_ID_ADC 19 /* ADC Controller */
+#define AT91SAM9X5_ID_DMA0 20 /* DMA Controller 0 */
+#define AT91SAM9X5_ID_DMA1 21 /* DMA Controller 1 */
+#define AT91SAM9X5_ID_UHPHS 22 /* USB Host High Speed */
+#define AT91SAM9X5_ID_UDPHS 23 /* USB Device High Speed */
+#define AT91SAM9X5_ID_EMAC0 24 /* Ethernet MAC0 */
+#define AT91SAM9X5_ID_LCDC 25 /* LCD Controller */
+#define AT91SAM9X5_ID_ISI 25 /* Image Sensor Interface */
+#define AT91SAM9X5_ID_MCI1 26 /* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9X5_ID_EMAC1 27 /* Ethernet MAC1 */
+#define AT91SAM9X5_ID_SSC 28 /* Synchronous Serial Controller */
+#define AT91SAM9X5_ID_CAN0 29 /* CAN Controller 0 */
+#define AT91SAM9X5_ID_CAN1 30 /* CAN Controller 1 */
+#define AT91SAM9X5_ID_IRQ0 31 /* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9X5_BASE_USART0 0xf801c000
+#define AT91SAM9X5_BASE_USART1 0xf8020000
+#define AT91SAM9X5_BASE_USART2 0xf8024000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_DDRSDRC0 (0xffffe800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+
+/*
+ * Base addresses for early serial code (uncompress.h)
+ */
+#define AT91_DBGU AT91_BASE_DBGU0
+#define AT91_USART0 AT91SAM9X5_BASE_USART0
+#define AT91_USART1 AT91SAM9X5_BASE_USART1
+#define AT91_USART2 AT91SAM9X5_BASE_USART2
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9X5_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9X5_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
+
+#define AT91SAM9X5_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9X5_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
new file mode 100644
index 0000000..a606d39
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
@@ -0,0 +1,53 @@
+/*
+ * Matrix-centric header file for the AT91SAM9x5 family
+ *
+ * Copyright (C) 2009-2012 Atmel Corporation.
+ *
+ * Only EBI related registers.
+ * Write Protect register definitions may be useful.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef AT91SAM9X5_MATRIX_H
+#define AT91SAM9X5_MATRIX_H
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
+#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
+#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
+#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
+#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
+#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
+#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
+#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
+#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
+#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
+#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
+#define AT91_MATRIX_MP_OFF (0 << 25)
+#define AT91_MATRIX_MP_ON (1 << 25)
+
+#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
+#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
+#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
+#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
+#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
+#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
+#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
+#define AT91_MATRIX_WPSR_WPV (1 << 0)
+#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
+
+#endif
--
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/