[PATCH] W1: OMAP HDQ1W: use 32-bit register accesses

From: Paul Walmsley
Date: Sun Jan 22 2012 - 15:26:49 EST



HDQ/1-wire registers are 32 bits long, even if the register contents
fit into 8 bits, so accesses must be 32-bit aligned. Evidently the
OMAP2/3 interconnects allowed the driver to get away with 8 bit accesses,
but the OMAP4 puts a stop to that:

[ 1.488800] Driver for 1-wire Dallas network protocol.
[ 1.495025] Bad mode in data abort handler detected
[ 1.500122] Internal error: Oops - bad mode: 0 [#1] SMP
[ 1.505615] Modules linked in:
[ 1.508819] CPU: 0 Not tainted (3.3.0-rc1-00008-g45030e9 #992)
[ 1.515289] PC is at 0xffff0018
[ 1.518615] LR is at omap_hdq_probe+0xd4/0x2cc

The OMAP4430 ES2 Rev X TRM does warn about this restriction in section
23.2.6.2 "HDQ/1-Wire Registers".

Fixes the crash on OMAP4430 ES2 Pandaboard. Tested also on OMAP34xx and
OMAP2420; it seems to work fine on those chips, although due to the lack
of boards with HDQ/1-wire devices here, a more indepth test was not
possible.

---
Intended for the v3.4 merge window.

drivers/w1/masters/omap_hdq.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 63e3eda..291897c 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -100,20 +100,20 @@ static struct w1_bus_master omap_w1_master = {
/* HDQ register I/O routines */
static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset)
{
- return __raw_readb(hdq_data->hdq_base + offset);
+ return __raw_readl(hdq_data->hdq_base + offset);
}

static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val)
{
- __raw_writeb(val, hdq_data->hdq_base + offset);
+ __raw_writel(val, hdq_data->hdq_base + offset);
}

static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
u8 val, u8 mask)
{
- u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask)
+ u8 new_val = (__raw_readl(hdq_data->hdq_base + offset) & ~mask)
| (val & mask);
- __raw_writeb(new_val, hdq_data->hdq_base + offset);
+ __raw_writel(new_val, hdq_data->hdq_base + offset);

return new_val;
}
--
1.7.8.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/