Re: [PATCH 1/2] PM / devfreq: add min/max_freq limit requested byusers.

[mark gross]

On Thu, Jan 12, 2012 at 11:08:44AM +0900, MyungJoo Ham wrote:
> On Thu, Jan 12, 2012 at 9:20 AM, Turquette, Mike <mturquette@xxxxxx> wrote:
> > On Wed, Jan 11, 2012 at 2:02 AM, MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx> wrote:
> >> The frequency requested to devfreq device driver from devfreq governors
> >> is restricted by min_freq and max_freq input.
> >
> > Hello MyungJoo,
> >
> > This change appears to allow userspace to set min/max limits on
> > devfreq devices via sysfs.  Not everyone likes to expose this stuff
> > (similar to the discussions around controlling clocks from debugfs).
> >
> > Should it be wrapped in some new config option?  I think a sane
> > default is that if the sysfs config option for devfreq is selected
> > then it should include all of the read-only stuff.  A second config
> > option (which depends on the option in my previous sentence) should
> > allow the read-write stuff to be enabled separately.  Thoughts?
> >
> > Also, how are you using this feature in practice?  Is this just for
> > test or are you planning on more fine-grained control of device
> > frequencies from userspace?
> >
> > Mike
> 
> Hello Mike,
> 
> 
> Although turning off clocks inconsiderately usually crashes the
> system, setting min/max frequencies generally affects (if not always)
> only the performance and power consumption.
> 
> For the optional min/max freq, I think each device should be able to
> choose to use it or not. Thus, rather than adding a Kconfig option,
> I'll let "profile" (struct devfreq_dev_profile) include
> "expose_user_min_max_freq" option.
> 
> In practice, we have been using min/max to test DVFS behaviors and its
> side effects. And we are going to use them to 1. restrict power
> consumption forcibly by the platform software if it is too hot or the
> battery is low, and to 2. guarantee the minimum performance for
> specific tasks controlled by the platform software.
> 
> Anyway, the reason 2 could be tackled by pm-qos if we allow more
> options in pm-qos with 1. pm qos type to enforce DVFS response time.
what would pm_qos do with DVFS response time?  What power management
knob would it enable a constraint for?

pm_qos doesn't do anything but enable power throttling code to consider
a constraint on how far to throttle "something".  pm_qos has no
enforcement power.

> 2. pm qos type to enforce graphics performance. And adding a duration
> option to pm-qos requests will be helpful (sort of a helper function):
> i.e., pm_qos_timed_request(struct pm_qos_request *req, int
> pm_qos_class, s32 value, unsigned long duration_ms);

What would be good units for graphics throughput?
Where in the graphics driver would you insert the equivalent of cpufreq?
to control the GPU core frequency?

--mark

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/