Re: [PATCH v4 2/2] dma/imx-sdma: convert _raw_readl/_raw_writel to readl/writel
From: Eric Miao
Date: Mon Jan 09 2012 - 08:25:37 EST
On Mon, Jan 9, 2012 at 7:51 PM, Russell King - ARM Linux
<linux@xxxxxxxxxxxxxxxx> wrote:
> On Sun, Jan 08, 2012 at 10:44:22PM +0800, Richard Zhao wrote:
>> readl/writel is more genric. And if CONFIG_ARM_DMA_MEM_BUFFERABLE,
>> they includes necessary memory barriers.
>
> In a DMA engine driver, you need to use the barrier accessors when:
>
> 1. You finally enable the DMA engine to perform a transfer.
> Â The included barrier ensures that writes to the descriptors are visible
> Â to the DMA engine.
>
> 2. You read from a status register before examining the descriptors.
> Â This ensures that the descriptor accesses won't be ordered before the
> Â status register read.
>
> Provided other accesses are within the same 1K region, the remainder of
> them do not have to be the strictly ordered accessors, and you can use
> the _relaxed variants (but only in ARM specific drivers.)
Russell,
Does this also mean when endian conversion is not necessary, the __raw_*
version will be better here? Or generally the _relaxed variants are more
recommended as endian conversion will be optimized away anyway with
these AMBA accesses as both sides are little-endian?
>
> So, if your DMA engine has a control register, and a descriptor pointer
> register, you can write the descriptor pointer register with a
> writel_relaxed(). ÂWhen you write the control register to enable the
> transfer, use writel() to ensure there's a barrier so the descriptors
> are visible.
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/