3.2.0-rc7+: WARNING: at arch/x86/mm/pageattr.c:877change_page_attr_set_clr+0x243/0x354()

From: Ralf Hildebrandt
Date: Sat Dec 31 2011 - 06:37:50 EST


>From today's git pull:

...
[ 6.369829] ACPI: Power Button [PWRF]
[ 6.381614] hpwdt 0000:01:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.381700] hpwdt: New timer passed in is 30 seconds.
[ 6.381855] ------------[ cut here ]------------
[ 6.381914] WARNING: at arch/x86/mm/pageattr.c:877 change_page_attr_set_clr+0x243/0x354()
[ 6.381991] Hardware name: ProLiant DL360 G5
[ 6.382063] Modules linked in: thermal(+) hpwdt(+) psmouse(+) container
[ 6.382220] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.382222] ACPI: Thermal Zone [THM0] (8 C)
[ 6.382386] button processor
[ 6.382503] Pid: 676, comm: modprobe Not tainted 3.2.0-rc7+ #18
[ 6.382559] Call Trace:
[ 6.382622] [<c102babc>] ? warn_slowpath_common+0x6c/0x95
[ 6.382678] [<c101c7c5>] ? change_page_attr_set_clr+0x243/0x354
[ 6.382735] [<c101c7c5>] ? change_page_attr_set_clr+0x243/0x354
[ 6.382793] [<c102bb00>] ? warn_slowpath_null+0x1b/0x1f
[ 6.382849] [<c101c7c5>] ? change_page_attr_set_clr+0x243/0x354
[ 6.382906] [<c101b7b5>] ? __ioremap_caller+0x365/0x45c
[ 6.382961] [<c101c92d>] ? set_memory_x+0x57/0x5b
[ 6.383022] [<f842c5b8>] ? hpwdt_init_one+0x207/0x3c2 [hpwdt]
[ 6.383081] [<c115dd06>] ? pci_device_probe+0x47/0x68
[ 6.383140] [<c11aa177>] ? driver_probe_device+0x4a/0x13a
[ 6.383207] [<c115dbd4>] ? pci_match_device+0xf/0x8a
[ 6.383262] [<c11aa2c9>] ? __driver_attach+0x62/0x64
[ 6.383318] [<c11aa267>] ? driver_probe_device+0x13a/0x13a
[ 6.383374] [<c11a9613>] ? bus_for_each_dev+0x3e/0x62
[ 6.383430] [<c115dc72>] ? pci_dev_put+0xd/0xd
[ 6.383484] [<c11a9f39>] ? driver_attach+0x19/0x1e
[ 6.383539] [<c11aa267>] ? driver_probe_device+0x13a/0x13a
[ 6.383595] [<c11a9cbb>] ? bus_add_driver+0x17d/0x24d
[ 6.383650] [<c115dc72>] ? pci_dev_put+0xd/0xd
[ 6.383705] [<c11aa4a9>] ? driver_register+0x57/0xec
[ 6.383760] [<c115e0bf>] ? __pci_register_driver+0x31/0x92
[ 6.383818] [<c1001027>] ? do_one_initcall+0x27/0x150
[ 6.383875] [<c101c99e>] ? set_memory_nx+0x57/0x5b
[ 6.383931] [<f8431000>] ? 0xf8430fff
[ 6.383986] [<c1054446>] ? sys_init_module+0xdff/0x1a14
[ 6.384051] [<c126fa97>] ? sysenter_do_call+0x12/0x26
[ 6.384108] ---[ end trace d99102c5cb722e75 ]---
[ 6.384170] hpwdt: CRU Base Address: 0xfff69800
[ 6.384171] hpwdt: CRU Offset Address: 0x0
[ 6.384172] hpwdt: CRU Length: 0x8000
[ 6.384173] hpwdt: CRU Mapped Address: f842e0dc
[ 6.384176] hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST).
[ 6.384351] hpwdt 0000:01:04.0: HP Watchdog Timer Driver: 1.3.0, timer margin: 30 seconds (nowayout=0).

--
Ralf Hildebrandt
GeschÃftsbereich IT | Abteilung Netzwerk
Charità - UniversitÃtsmedizin Berlin
Campus Benjamin Franklin
Hindenburgdamm 30 | D-12203 Berlin
Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962
ralf.hildebrandt@xxxxxxxxxx | http://www.charite.de

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/