Re: [RFC v2 4/9] of: add clock providers

[Grant Likely]

On Thu, Dec 15, 2011 at 8:13 AM, Shawn Guo <shawn.guo@xxxxxxxxxxxxx> wrote:
> On Thu, Dec 15, 2011 at 08:23:17AM -0600, Rob Herring wrote:
>>
>>
>> On 12/15/2011 07:51 AM, Shawn Guo wrote:
>> > On Tue, Dec 13, 2011 at 10:54:58AM -0700, Grant Likely wrote:
>> >> On Mon, Dec 12, 2011 at 4:29 PM, Jamie Iles <jamie@xxxxxxxxxxxxx> wrote:
>> >>> Hi Grant,
>> >>>
>> >>> I'm still going through these and trying to digest them but a couple of
>> >>> quick questions/comments.
>> >>>
>> >>> Jamie
>> >>>
>> >>> On Mon, Dec 12, 2011 at 03:02:04PM -0700, Grant Likely wrote:
>> >>>> diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
>> >>>> new file mode 100644
>> >>>> index 0000000..e40c436
>> >>>> --- /dev/null
>> >>>> +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
>> >>>> @@ -0,0 +1,114 @@
>> >>>> +This binding is a work-in-progress, and are based on some experimental
>> >>>> +work by benh[1].
>> >>>> +
>> >>>> +Sources of clock signal can be represented by any node in the device
>> >>>> +tree.  Those nodes are designated as clock providers.  Clock consumer
>> >>>> +nodes use a phandle and clock specifier pair to connect clock provider
>> >>>> +outputs to clock inputs.  Similar to the gpio specifiers, a clock
>> >>>> +specifier is an array of one more more cells identifying the clock
>> >>>> +output on a device.  The length of a clock specifier is defined by the
>> >>>> +value of a #clock-cells property in the clock provider node.
>> >>>> +
>> >>>> +[1] http://patchwork.ozlabs.org/patch/31551/
>> >>>> +
>> >>>> +==Clock providers==
>> >>>> +
>> >>>> +Required properties:
>> >>>> +#clock-cells:           Number of cells in a clock specifier; typically will be
>> >>>> +                set to 1
>> >>>
>> >>> I'm not sure I fully understand what the extra cells actually mean for
>> >>> clocks.  I think the first integer is the clock output to use but some
>> >>> of the versatile and highbank ones only have a phandle or is it more
>> >>> implementation defined?  The clock-output-names description hints at
>> >>> recommended, so I find this a little confusing, but that could just be
>> >>> me!
>> >>
>> >> I'm following convention here that has been established with
>> >> interrupts, gpios, and others.  Sometimes more information is needed
>> >> that just the clock number.  Using #clock-cells gives a clock provider
>> >> the option of having additional fields for clock flags or other data.
>> >> This is very much implementation defined.  Simple clock providers that
>> >> only have a single clock output can easily use #clock-cells = <0>.
>> >> Providers with multiple outputs will need to use 1 or more cells.
>> >>
>> > It totally destroys my understanding on #clock-cells :)
>> >
>> > I thought it's introduced to reduce the clock nodes in dts.  That said,
>> > #clock-cells stands for the number of clks we describe in the node.
>> > When #clock-cells > 1 for a node, the node becomes a clk blob which
>> > actually contains multiple clks.  I migrated the imx6 clock to your
>> > first post with this approach [1], using 70 nodes to describe 110
>> > clocks (~35% nodes reduced).
>> >
>> > Now, you are saying it's not designed for this purpose.  I'm pretty
>> > confused, because the only reasonable use of #clock-cells to me is
>> > just that way, and I fail to see why we need #clock-cells if we do
>> > not use it that way.
>> >
>> > http://comments.gmane.org/gmane.linux.drivers.devicetree/9631
>>
>> Think of clock-cells as the size of array elements (minus 1), not the
>> number of array elements. If you have more than 1 clock per node, then
>> you need more information on the clock input side than just a phandle to
>> describe which clock you are using. Typically this would just be the
>> phandle plus index of the clock you want. This is just like gpio where
>> you have controller phandle plus gpio line number.
>>
> It seems I misunderstood/misused the #clock-cells.  So even we have
> multiple clks embedded in a node, #clock-cells=1 works for most of the
> cases, since what really matters is just the index of the clk we want
> the phandle to point to.  And the clock driver has to figure out how
> many clks are in there by some other means.  Correct me please, if I
> still misunderstand it.

Yes, it sounds like you have it right.

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/