Re: [REPOST RFC PATCH 0/3] New "gpio-poweroff" driver to turn offplatform devices with GPIOs

[Moffett, Kyle D]

On Dec 13, 2011, at 14:10, Rob Herring wrote:
> On 12/13/2011 12:23 PM, Kyle Moffett wrote:
>> 
>> I posted this patch series a few weeks ago and saw no responses, so I
>> tweaked the CC list and am reposting it again for review.
>> 
>> I'm working on support for some custom hardware of ours, and part of
>> the support code is the ability for the software to shutdown the power
>> supply using GPIOs (via an I2C GPIO controller).
>> 
>> I previously had this in my platform code, but it seemed generically
>> useful, so I split it out into a separate module for others to use.
>> 
>> The first two patches are generic of_gpio enhancements, providing some
>> new library functions for requesting lots of GPIOs at once.
>> 
>> The third patch is the actual driver itself.  The driver can be used to
>> instantiate a platform device as a whole-machine-poweroff device as we
>> use it on our hardware.  Alternatively it can instantiate multiple
>> platform devs at specific locations on the device tree which trigger
>> from the platform_driver->shutdown() callback.
>> 
>> For architectures which are still stuck in the dark ages, this driver
>> also supports being instantiated via legacy platform_data.
> 
> Leave them there... :)

Mostly this was out of convenience and imitating the other OF platform
drivers.  I wrote it and ended up with a struct full of probe data being
passed between functions, so I just called it "platform_data" :-D.


>> The OpenFirmware binding documentation is added in the third patch.
>> Since this is my first cut, it's a little rough, so please be gentle.
>> 
>> I'm interested to know what you all think.
> 
> Does the regulator framework gpio-regulator not work for this?

Well, when I initially wrote this code, the regulator framework didn't
exist :-D.

I looked at it a bit when I was generalizing my code, but it seemed
dramatically more complicated than I needed, and I couldn't see any
reasonable way to hook it from the machine_poweroff() code.

There's also the fact that I was looking for a pure-device-tree type
of driver and the regulator framework does not seem to support the
standard OF-platform probe system.

I will admit that there's probably some value in having a more generic
GPIO-power-control (instead of just poweroff), but I don't have the
target use-case to be able to design for it.


> The DT gpio patches look useful on their own.

Yeah, it seemed like a fairly generic extension of the existing API.

Thanks for the comments!

Cheers,
Kyle Moffett

--
Curious about my work on the Debian powerpcspe port?
I'm keeping a blog here: http://pureperl.blogspot.com/


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/