[PATCH v2 1/2] dma/ep93xx_dma: fix initialization of M2M control register

[Mika Westerberg]

From: Rafal Prylowski <prylowski@xxxxxxxxxxx>

Setting the flags in case of IDE didn't have any effect since the control
register is overwritten few lines below. So move these to be after the control
register is initialized.

Signed-off-by: Rafal Prylowski <prylowski@xxxxxxxxxxx>
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxx>
Acked-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
---
 drivers/dma/ep93xx_dma.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
index b47e2b8..6181811 100644
--- a/drivers/dma/ep93xx_dma.c
+++ b/drivers/dma/ep93xx_dma.c
@@ -459,10 +459,6 @@ static int m2m_hw_setup(struct ep93xx_dma_chan *edmac)
 		 * This IDE part is totally untested. Values below are taken
 		 * from the EP93xx Users's Guide and might not be correct.
 		 */
-		control |= M2M_CONTROL_NO_HDSK;
-		control |= M2M_CONTROL_RSS_IDE;
-		control |= M2M_CONTROL_PW_16;
-
 		if (data->direction == DMA_TO_DEVICE) {
 			/* Worst case from the UG */
 			control = (3 << M2M_CONTROL_PWSC_SHIFT);
@@ -473,6 +469,10 @@ static int m2m_hw_setup(struct ep93xx_dma_chan *edmac)
 			control |= M2M_CONTROL_SAH;
 			control |= M2M_CONTROL_TM_RX;
 		}
+
+		control |= M2M_CONTROL_NO_HDSK;
+		control |= M2M_CONTROL_RSS_IDE;
+		control |= M2M_CONTROL_PW_16;
 		break;
 
 	default:
-- 
1.7.7

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/