[RFC PATCH 15/17] powerpc/e500: Fix up all remaining code uses of CONFIG_E500

From: Kyle Moffett
Date: Wed Nov 09 2011 - 19:09:21 EST

Next message: Kyle Moffett: "[RFC PATCH 17/17] powerpc/e500: Finally remove "CONFIG_E500""
Previous message: Kyle Moffett: "[RFC PATCH 14/17] powerpc/e500: Don't make kgdb use e500v1/e500v2 registers on e500mc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The CONFIG_E500 config option is ambiguous and used incorrectly in many
places to refer to some combination of e500v1/v2, e500mc, and e5500.

Fix up each reference to use the correct combinations of the following
config options:
CONFIG_FSL_E500_V1_V2
CONFIG_FSL_E500MC
CONFIG_FSL_E5500

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@xxxxxxxxxx>
---
arch/powerpc/Kconfig | 2 +-
arch/powerpc/include/asm/reg_booke.h | 17 ++++++++++-------
arch/powerpc/kernel/cputable.c | 8 ++++----
arch/powerpc/kernel/entry_32.S | 8 +++++---
arch/powerpc/kvm/Kconfig | 3 ++-
arch/powerpc/platforms/Kconfig.cputype | 22 ++++++++++------------
6 files changed, 32 insertions(+), 28 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e3412a1..53c5acf 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -288,7 +288,7 @@ config HUGETLB_PAGE_SIZE_VARIABLE

config MATH_EMULATION
bool "Math emulation"
- depends on 4xx || 8xx || FSL_E200 || PPC_MPC832x || E500
+ depends on 4xx || 8xx || FSL_E200 || PPC_MPC832x || FSL_E500_V1_V2
---help---
Some PowerPC chips designed for embedded applications do not have
a floating-point unit and therefore do not implement the
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 81cd987..845a069 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -206,12 +206,10 @@
#define PPC47x_MCSR_FPR 0x00800000 /* FPR parity error */
#define PPC47x_MCSR_IPR 0x00400000 /* Imprecise Machine Check Exception */

-#ifdef CONFIG_E500
-/* All e500 */
-#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
-#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */
-
/* e500v1/v2 */
+#ifdef CONFIG_FSL_E500_V1_V2
+#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
+#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */
#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */
#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */
#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */
@@ -222,8 +220,12 @@
#define MCSR_BUS_WBERR 0x00000004UL /* Write Data Bus Error */
#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */
#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */
+#endif

-/* e500mc */
+/* e500mc/e5500 */
+#if defined(CONFIG_FSL_E500MC) || defined(CONFIG_FSL_E5500)
+#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
+#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */
#define MCSR_DCPERR_MC 0x20000000UL /* D-Cache Parity Error */
#define MCSR_L2MMU_MHIT 0x04000000UL /* Hit on multiple TLB entries */
#define MCSR_NMI 0x00100000UL /* Non-Maskable Interrupt */
@@ -250,7 +252,8 @@
#endif

/* Bit definitions for the HID1 */
-#ifdef CONFIG_E500
+#if defined(CONFIG_FSL_E500_V1_V2) || defined(CONFIG_FSL_E500MC) \
+ || defined(CONFIG_FSL_E5500)
/* e500v1/v2 */
#define HID1_PLL_CFG_MASK 0xfc000000 /* PLL_CFG input pins */
#define HID1_RFXE 0x00020000 /* Read fault exception enable */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index a6f2544..3fd01ca 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -69,10 +69,10 @@ extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_power7(void);
extern void __restore_cpu_a2(void);
#endif /* CONFIG_PPC64 */
-#if defined(CONFIG_E500)
+#ifdef CONFIG_FSL_E5500
extern void __setup_cpu_e5500(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_e5500(void);
-#endif /* CONFIG_E500 */
+#endif /* CONFIG_FSL_E5500 */

/* This table only contains "desktop" CPUs, it need to be filled with embedded
* ones as well...
@@ -1975,7 +1975,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.platform = "ppce500mc",
},
#endif /* CONFIG_FSL_E500MC */
-#ifdef CONFIG_E500 /* FIXME */
+#ifdef CONFIG_FSL_E5500
{ /* e5500 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x80240000,
@@ -1994,7 +1994,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_e500mc,
.platform = "ppce5500",
},
-#endif /* CONFIG_E500 */
+#endif /* CONFIG_FSL_E5500 */

#ifdef CONFIG_PPC_A2
{ /* Standard A2 (>= DD2) + FPU core */
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 56212bc..373cdc4 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -178,14 +178,15 @@ transfer_to_handler:
cmplw r1,r9 /* if r1 <= ksp_limit */
ble- stack_ovf /* then the kernel stack overflowed */
5:
-#if defined(CONFIG_6xx) || defined(CONFIG_E500)
+#if defined(CONFIG_6xx) || defined(CONFIG_FSL_E500_V1_V2) \
+ || defined(CONFIG_FSL_E500MC)
rlwinm r9,r1,0,0,31-THREAD_SHIFT
tophys(r9,r9) /* check local flags */
lwz r12,TI_LOCAL_FLAGS(r9)
mtcrf 0x01,r12
bt- 31-TLF_NAPPING,4f
bt- 31-TLF_SLEEPING,7f
-#endif /* CONFIG_6xx || CONFIG_E500 */
+#endif
.globl transfer_to_handler_cont
transfer_to_handler_cont:
3:
@@ -236,7 +237,8 @@ reenable_mmu: /* re-enable mmu so we can */
RFI /* jump to handler, enable MMU */
#endif /* CONFIG_TRACE_IRQFLAGS */

-#if defined (CONFIG_6xx) || defined(CONFIG_E500)
+#if defined (CONFIG_6xx) || defined(CONFIG_FSL_E500_V1_V2) \
+ || defined(CONFIG_FSL_E500MC)
4: rlwinm r12,r12,0,~_TLF_NAPPING
stw r12,TI_LOCAL_FLAGS(r9)
b power_save_ppc32_restore
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 78133de..3f608bf 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -116,7 +116,8 @@ config KVM_EXIT_TIMING

config KVM_E500
bool "KVM support for PowerPC E500 processors"
- depends on EXPERIMENTAL && E500
+ depends on EXPERIMENTAL
+ depends on FSL_E500_V1_V2 || FSL_E500MC || FSL_E5500
select KVM
select KVM_MMIO
---help---
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index cff45e3..22df19d 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -159,7 +159,7 @@ config PPC_FPU

config FSL_EMB_PERFMON
bool "Freescale Embedded Perfmon"
- depends on E500 || PPC_83xx
+ depends on PPC_83xx || FSL_E500_V1_V2 || FSL_E500MC || FSL_E5500
help
This is the Performance Monitor support found on the e500 core
and some e300 cores (c3 and c4). Select this only if your
@@ -171,25 +171,23 @@ config FSL_EMB_PERF_EVENT
default y

config FSL_EMB_PERF_EVENT_E500
- bool
- depends on FSL_EMB_PERF_EVENT && E500
- default y
+ def_bool y
+ depends on FSL_EMB_PERF_EVENT
+ depends on FSL_E500_V1_V2 || FSL_E500MC || FSL_E5500

config 4xx
bool
depends on 40x || 44x
default y

-config BOOKE
- bool
- depends on FSL_E200 || E500 || 44x || PPC_BOOK3E
- default y
-
config FSL_BOOKE
- bool
- depends on FSL_E200 || (E500 && PPC32)
+ def_bool y
+ depends on FSL_E200 || FSL_E500_V1_V2 || FSL_E500MC
select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT
- default y
+
+config BOOKE
+ def_bool y
+ depends on FSL_BOOKE || 44x || PPC_BOOK3E

config FSL_CORENET
bool
--
1.7.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Kyle Moffett: "[RFC PATCH 17/17] powerpc/e500: Finally remove "CONFIG_E500""
Previous message: Kyle Moffett: "[RFC PATCH 14/17] powerpc/e500: Don't make kgdb use e500v1/e500v2 registers on e500mc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]