Re: [RFC 6/8] of: add clock providers

[Rob Herring]

On 11/09/2011 05:23 AM, Cousson, Benoit wrote:
> On 11/9/2011 10:13 AM, Sascha Hauer wrote:
>> On Tue, Nov 08, 2011 at 06:19:41PM -0700, Grant Likely wrote:
> 
> [...]
> 
>>> +Sources of clock signal can be represented by any node in the device
>>> +tree.  Those nodes are designated as clock providers.  Clock consumer
>>> +nodes use a phandle and clock specifier pair to connect clock provider
>>> +outputs to clock inputs.  Similar to the gpio specifiers, a clock
>>> +specifier is an array of one more more cells identifying the clock
>>> +output on a device.  The length of a clock specifier is defined by the
>>> +value of a #clock-cells property in the clock provider node.
>>> +
>>> +[1] http://patchwork.ozlabs.org/patch/31551/
>>> +
>>> +==Clock providers==
>>> +
>>> +Required properties:
>>> +#clock-cells:       Number of cells in a clock specifier; typically
>>> will be
>>> +           set to 1
>>> +
>>> +Optional properties:
>>> +clock-output-name: Recommended to be a list of strings of clock
>>> output signal
>>> +           names indexed by the first cell in the clock specifier.
>>> +           However, the meaning of clock-output-names is domain
>>> +           specific to the clock provider, and is only provided to
>>> +           encourage using the same meaning for the majority of clock
>>> +           providers.  This format may not work for clock providers
>>> +           using a complex clock specifier format.  In those cases it
>>> +           is recommended to omit this property and create a binding
>>> +           specific names property.
>>
>> If the clock-output-name property is omitted, does this mean a clock
>> provider only has a single output or does it mean that it's not known
>> how many clock outputs a provider actually has?
> 
> Allowing several outputs for a single clock node might lead to a lot of
> confusion. What will be the meaning of a clock rate if you have several
> outputs at different frequency?

You typically only have a frequency property for fixed clocks.

However, we should think about how to set frequency for programmable
clocks. Perhaps this is just making clock-frequency an array of
values in the same order as the outputs.

> I think it will be better to define a clock node as a single source of
> clock. If several outputs are needed, then we should define several
> clock nodes.
> If we let a clock node be any kind of big clock blob, we will never be
> able to define some generic reusable clock node API. Everybody will
> define its own custom clock blobs.
> 

Whether you decide to implement a blob or every single mux, divider, and
gate is independent from whether you use generic clock code or not. You
could simply define a clock controller node with lots of outputs yet
still use generic code to implement clock support in Linux. The reality
is you will probably have a mixture of generic and SOC-specific clocks.

What is our goal here? I'm skeptical we will ever get to the point that
we can fully describe the clock tree for a new SOC without any code
changes. Perhaps our goal is simply that clock differences across all
boards for an SOC can be described in DT.

Rob

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/