Re: [RFC 6/8] of: add clock providers

[Rob Herring]

On 11/08/2011 07:19 PM, Grant Likely wrote:
> Based on work by Ben Herrenschmidt and Jeremy Kerr, this patch adds an
> of_clk_get function to allow platforms to retrieve clock data from the
> device tree.
> 
> Platform register a provider through of_clk_add_provider, which will be
> called when a device references the provider's OF node for a clock
> reference.
> 
> Signed-off-by: Grant Likely <grant.likely@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/clock/clock-bindings.txt   |  109 +++++++++++++++++
>  drivers/of/Kconfig                                 |    6 +
>  drivers/of/Makefile                                |    1 +
>  drivers/of/clock.c                                 |  129 ++++++++++++++++++++
>  include/linux/of_clk.h                             |   37 ++++++
>  5 files changed, 282 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/clock-bindings.txt
>  create mode 100644 drivers/of/clock.c
>  create mode 100644 include/linux/of_clk.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
> new file mode 100644
> index 0000000..4770c7e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
> @@ -0,0 +1,109 @@
> +This binding is a work-in-progress, and are based on some experimental
> +work by benh[1].
> +
> +Sources of clock signal can be represented by any node in the device
> +tree.  Those nodes are designated as clock providers.  Clock consumer
> +nodes use a phandle and clock specifier pair to connect clock provider
> +outputs to clock inputs.  Similar to the gpio specifiers, a clock
> +specifier is an array of one more more cells identifying the clock
> +output on a device.  The length of a clock specifier is defined by the
> +value of a #clock-cells property in the clock provider node.
> +
> +[1] http://patchwork.ozlabs.org/patch/31551/
> +
> +==Clock providers==
> +
> +Required properties:
> +#clock-cells:	   Number of cells in a clock specifier; typically will be
> +		   set to 1
> +
> +Optional properties:
> +clock-output-name: Recommended to be a list of strings of clock output signal
> +		   names indexed by the first cell in the clock specifier.
> +		   However, the meaning of clock-output-names is domain
> +		   specific to the clock provider, and is only provided to
> +		   encourage using the same meaning for the majority of clock
> +		   providers.  This format may not work for clock providers
> +		   using a complex clock specifier format.  In those cases it
> +		   is recommended to omit this property and create a binding
> +		   specific names property.
> +
> +		   Clock consumer nodes must never directly reference
> +		   the provider's clock-output-names property.
> +
> +For example:
> +
> +    oscillator {
> +        #clock-cells = <1>;
> +        clock-output-name = "ckil", "ckih";
> +    };
> +
> +- this node defines a device with two clock outputs, the first named
> +  "ckil" and the second named "ckih".  Consumer nodes always reference
> +  clocks by index. The names should reflect the clock output signal
> +  names for the device.
> +
> +==Clock consumers==
> +
> +Required properties:
> +clock-input:	List of phandle and clock specifier pairs, one pair
> +		for each clock input to the device.
> +clock-input-name: List of clock input name strings sorted in the same
> +		order as the clock-input property.  Consumers drivers
> +		will use clock-input-name to match clock input names
> +		with clock-input specifiers.
> +
> +For example:
> +
> +    uart {
> +        clock-input = <&osc 1> <&ref 0>;
> +        clock-input-name = "baud", "register";
> +    };

This is duplicated below.

> +
> +
> +This represents a device with two clock inputs, named "baud" and "register".
> +The baud clock is connected to output 1 of the &osc device, and the register
> +clock is connected to output 0 of the &ref.
> +
> +==Example==
> +
> +    /* external oscillator */
> +    osc: oscillator {
> +        compatible = "fixed-clock";
> +        #clock-cells = <1>;
> +        frequency  = <32678>;

The code is using "clock-frequency" here.

> +        clock-output-name = "osc";
> +    };
> +
> +    /* phase-locked-loop device, generates a higher frequency clock
> +     * from the external oscillator reference */
> +    pll: pll {
> +        compatible = "some-pll-interface"
> +        #clock-cells = <1>;
> +        clock-input = <&osc 0>;

There's a mismatch in #clock-cells size and this.

> +        clock-input-name = "ref";
> +        reg = <0x4c000 0x1000>;
> +        clock-output-name = "pll", "pll-switched";
> +    };
> +
> +    /* UART, using the low frequency oscillator for the baud clock,
> +     * and the high frequency switched PLL output for register
> +     * clocking */
> +    uart {
> +        compatible = "fsl,imx-uart";
> +        reg = <0xa000 0x1000>;
> +        interrupts = <33>;
> +        clock-input = <&osc 0>, <&pll 1>;
> +        clock-input-name = "baud", "register";
> +    };
> +
> +This DT fragment defines three devices: an external oscillator to provide a
> +low-frequency reference clock, a PLL device to generate a higher frequency
> +clock signal, and a UART.
> +
> +* The oscillator is fixed-frequency, and provides one clock output, named "osc".
> +* The PLL is both a clock provider and a clock consumer. It uses the clock
> +  signal generated by the external oscillator, and provides two output signals
> +  ("pll" and "pll-switched").
> +* The UART has its baud clock connected the external oscillator and its
> +  register clock connected to the PLL clock (the "pll-switched" signal)
> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
> index 268163d..b49ab9c 100644
> --- a/drivers/of/Kconfig
> +++ b/drivers/of/Kconfig
> @@ -47,6 +47,12 @@ config OF_IRQ
>  	def_bool y
>  	depends on !SPARC
>  
> +config OF_CLOCK
> +	def_bool y
> +	depends on HAVE_CLK
> +	help
> +	  OpenFirmware clock accessors
> +
>  config OF_DEVICE
>  	def_bool y
>  
> diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> index a73f5a5..e7ad1e9 100644
> --- a/drivers/of/Makefile
> +++ b/drivers/of/Makefile
> @@ -5,6 +5,7 @@ obj-$(CONFIG_OF_ADDRESS)  += address.o
>  obj-$(CONFIG_OF_IRQ)    += irq.o
>  obj-$(CONFIG_OF_DEVICE) += device.o platform.o
>  obj-$(CONFIG_OF_GPIO)   += gpio.o
> +obj-$(CONFIG_OF_CLOCK)	+= clock.o
>  obj-$(CONFIG_OF_I2C)	+= of_i2c.o
>  obj-$(CONFIG_OF_NET)	+= of_net.o
>  obj-$(CONFIG_OF_SPI)	+= of_spi.o
> diff --git a/drivers/of/clock.c b/drivers/of/clock.c
> new file mode 100644
> index 0000000..542b9e4
> --- /dev/null
> +++ b/drivers/of/clock.c
> @@ -0,0 +1,129 @@
> +/*
> + * Clock infrastructure for device tree platforms
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_clk.h>
> +#include <linux/list.h>
> +#include <linux/mutex.h>
> +#include <linux/slab.h>
> +#include <linux/device.h>
> +
> +/**
> + * struct of_clk_provider - Clock provider registration structure
> + * @link: Entry in global list of clock providers
> + * @node: Pointer to device tree node of clock provider
> + * @get: Get clock callback.  Returns NULL or a struct clk for the
> + *       given clock specifier
> + * @data: context pointer to be passed into @get callback
> + */
> +struct of_clk_provider {
> +	struct list_head link;
> +
> +	struct device_node *node;
> +	struct clk *(*get)(struct of_phandle_args *clkspec, void *data);
> +	void *data;
> +};
> +
> +static LIST_HEAD(of_clk_providers);
> +static DEFINE_MUTEX(of_clk_lock);
> +
> +/**
> + * of_clk_add_provider() - Register a clock provider for a node
> + * @np: Device node pointer associated with clock provider
> + * @clk_src_get: callback for decoding clock
> + * @data: context pointer for @clk_src_get callback.
> + */
> +int of_clk_add_provider(struct device_node *np,
> +			struct clk *(*clk_src_get)(struct of_phandle_args *clkspec,
> +						   void *data),
> +			void *data)
> +{
> +	struct of_clk_provider *cp;
> +
> +	cp = kzalloc(sizeof(struct of_clk_provider), GFP_KERNEL);
> +	if (!cp)
> +		return -ENOMEM;
> +
> +	cp->node = of_node_get(np);
> +	cp->data = data;
> +	cp->get = clk_src_get;
> +
> +	mutex_lock(&of_clk_lock);
> +	list_add(&cp->link, &of_clk_providers);
> +	mutex_unlock(&of_clk_lock);
> +	pr_debug("Added clock from %s\n", np->full_name);
> +
> +	return 0;
> +}
> +
> +/**
> + * of_clk_del_provider() - Remove a previously registered clock provider
> + * @np: Device node pointer associated with clock provider
> + */
> +void of_clk_del_provider(struct device_node *np)
> +{
> +	struct of_clk_provider *cp;
> +
> +	mutex_lock(&of_clk_lock);
> +	list_for_each_entry(cp, &of_clk_providers, link) {
> +		if (cp->node == np) {
> +			list_del(&cp->link);
> +			of_node_put(cp->node);
> +			kfree(cp);
> +			break;
> +		}
> +	}
> +	mutex_unlock(&of_clk_lock);
> +}
> +
> +static struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec)
> +{
> +	struct of_clk_provider *provider;
> +	struct clk *clk = NULL;
> +
> +	/* Check if we have such a provider in our array */
> +	mutex_lock(&of_clk_lock);
> +	list_for_each_entry(provider, &of_clk_providers, link) {
> +		if (provider->node == clkspec->np)
> +			clk = provider->get(clkspec, provider->data);

How about:

if (provider->get)
	clk = provider->get(clkspec, provider->data);
else
	clk = provider->data;


Or a default get function can do this.

> +		if (clk)
> +			break;
> +	}
> +	mutex_unlock(&of_clk_lock);
> +
> +	return clk;
> +}
> +
> +struct clk *of_clk_get(struct device_node *np, int index)
> +{
> +	struct of_phandle_args clkspec;
> +	struct clk *clk;
> +	int rc;
> +
> +	if (index < 0)
> +		return NULL;
> +
> +	rc = of_parse_phandle_with_args(np, "clock", "#clock-cells", index,
> +					&clkspec);
> +	if (rc)
> +		return NULL;
> +
> +	clk = __of_clk_get_from_provider(&clkspec);
> +	of_node_put(clkspec.np);
> +	return clk;
> +}
> +
> +struct clk *of_clk_get_by_name(struct device_node *np, const char *name)
> +{
> +	int index = 0;
> +
> +	if (name)
> +		index = of_property_match_string(np, "clock-input-names", name);
> +	return of_clk_get(np, index);
> +}
> +
> diff --git a/include/linux/of_clk.h b/include/linux/of_clk.h
> new file mode 100644
> index 0000000..e476a5f
> --- /dev/null
> +++ b/include/linux/of_clk.h
> @@ -0,0 +1,37 @@
> +/*
> + * Clock infrastructure for device tree platforms
> + */
> +#ifndef __OF_CLK_H
> +#define __OF_CLK_H
> +
> +struct device;
> +struct clk;
> +
> +#ifdef CONFIG_OF_CLOCK
> +
> +struct device_node;
> +
> +int of_clk_add_provider(struct device_node *np,
> +			struct clk *(*clk_src_get)(struct of_phandle_args *args,
> +						   void *data),
> +			void *data);
> +
> +void of_clk_del_provider(struct device_node *np);
> +
> +struct clk *of_clk_get(struct device_node *np, int index);
> +struct clk *of_clk_get_by_name(struct device_node *np, const char *name);
> +
> +#else
> +static struct clk *of_clk_get(struct device_node *np, int index);
> +{
> +	return NULL;
> +}
> +
> +static struct clk *of_clk_get_by_name(struct device_node *np, const char *name)
> +{
> +	return NULL;
> +}
> +#endif
> +
> +#endif /* __OF_CLK_H */
> +

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/