crash related to plugging in and unplugging of sd/mmc readers (andother storage media but not pendrives)

From: Piotr Gluszenia Slawinski
Date: Tue Nov 01 2011 - 14:07:50 EST


hello.
to be brief :
linux kernel versions affected :
from 3.1.0-rc4 down to 2.6.26 (did not test anything below)

hardware :
x86 32bit acer aspire 3690

steps to reproduce:
sometimes it works fine - every time.
all 'pendrive' sticks work fine.

yet sometimes plugging in ext hdd,
sdd/mmc card reader, digital camera etc. - yields in 100% cpu consumption,
and no task is listed to do that. unplugging it sometimes just cuts the problem. yet soometimes (attached) oops happens. - sometimes first time you unplug it, sometimes you're 'lucky'. sometimes it oopses on plugging it in.

when there is 'sometimes' period (phase of moon perhaps) - nothing helps. you can reboot, curse - it just does not work. so whatever causes it to either do work or not has to change somewhere in 'back stages' .

i've observed same behaviour on other computers - amd64 sempron with nforce2 chipset, ancient sis-chipset based athlon, and even ancient p3.
with those computers i can resolve it by turning machine off, and reordering pci cards. then it's either better or worse - for some time.
there is not any 'specific' card layout making it work - just change seems sufficient.



--i 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xd0444000-0xd04443ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-05]
pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:01.0: [14e4:170c] type 0 class 0x000200
pci 0000:06:01.0: reg 10: [mem 0xd0010000-0xd0011fff]
pci 0000:06:01.0: supports D1 D2
pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:01.0: PME# disabled
pci 0000:06:02.0: [168c:001a] type 0 class 0x000200
pci 0000:06:02.0: reg 10: [mem 0xd0000000-0xd000ffff]
pci 0000:06:04.0: [1524:1412] type 2 class 0x000607
pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:06:04.0: supports D1 D2
pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.0: PME# disabled
pci 0000:06:04.1: [1524:0530] type 0 class 0x000501
pci 0000:06:04.1: reg 10: [mem 0xd0013000-0xd001307f]
pci 0000:06:04.1: supports D1 D2
pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.1: PME# disabled
pci 0000:06:04.2: [1524:0550] type 0 class 0x000805
pci 0000:06:04.2: reg 10: [mem 0xd0013400-0xd00134ff]
pci 0000:06:04.2: supports D1 D2
pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.2: PME# disabled
pci 0000:06:04.3: [1524:0520] type 0 class 0x000501
pci 0000:06:04.3: reg 10: [mem 0xd0013800-0xd001387f]
pci 0000:06:04.3: supports D1 D2
pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.3: PME# disabled
pci 0000:06:04.4: [1524:0551] type 0 class 0x000501
pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff]
pci 0000:06:04.4: supports D1 D2
pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.4: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x60000000-0xfebfffff] (subtractive decode)
pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 000000005f680000 - 000000005fffffff
cfg80211: Calling CRDA to update world regulatory domain
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x60000000-0xfebfffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfed14000-0xfed17fff]
pnp 00:01: [mem 0xfed18000-0xfed18fff]
pnp 00:01: [mem 0xfed19000-0xfed19fff]
pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:05: [io 0x00f0]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x002e-0x002f]
pnp 00:06: [io 0x004e-0x004f]
pnp 00:06: [io 0x0061]
pnp 00:06: [io 0x0063]
pnp 00:06: [io 0x0065]
pnp 00:06: [io 0x0067]
pnp 00:06: [io 0x0070]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0092]
pnp 00:06: [io 0x00b2-0x00b3]
pnp 00:06: [io 0x0800-0x080f]
pnp 00:06: [io 0x1000-0x107f]
pnp 00:06: [io 0x1180-0x11bf]
pnp 00:06: [io 0x1640-0x164f]
pnp 00:06: [io 0xfe00-0xfefe]
pnp 00:06: [io 0xff2c-0xff2f]
system 00:06: [io 0x0800-0x080f] has been reserved
system 00:06: [io 0x1000-0x107f] has been reserved
system 00:06: [io 0x1180-0x11bf] has been reserved
system 00:06: [io 0x1640-0x164f] has been reserved
system 00:06: [io 0xfe00-0xfefe] has been reserved
system 00:06: [io 0xff2c-0xff2f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0070-0x0077]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs SYN0703 SYN0700 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:1e.0: BAR 9: assigned [mem 0x60000000-0x63ffffff pref]
pci 0000:00:1e.0: BAR 7: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.3: BAR 8: assigned [mem 0x64000000-0x641fffff]
pci 0000:00:1c.3: BAR 9: assigned [mem 0x64200000-0x643fffff 64bit pref]
pci 0000:00:1c.3: BAR 7: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.2: BAR 8: assigned [mem 0x64400000-0x645fffff]
pci 0000:00:1c.2: BAR 9: assigned [mem 0x64600000-0x647fffff 64bit pref]
pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.1: BAR 8: assigned [mem 0x64800000-0x649fffff]
pci 0000:00:1c.1: BAR 9: assigned [mem 0x64a00000-0x64bfffff 64bit pref]
pci 0000:00:1c.1: BAR 7: assigned [io 0x6000-0x6fff]
pci 0000:00:1c.0: BAR 8: assigned [mem 0x64c00000-0x64dfffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0x64e00000-0x64ffffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x7000-0x7fff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0x64c00000-0x64dfffff]
pci 0000:00:1c.0: bridge window [mem 0x64e00000-0x64ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.1: bridge window [mem 0x64800000-0x649fffff]
pci 0000:00:1c.1: bridge window [mem 0x64a00000-0x64bfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0x64400000-0x645fffff]
pci 0000:00:1c.2: bridge window [mem 0x64600000-0x647fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-05]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0x64000000-0x641fffff]
pci 0000:00:1c.3: bridge window [mem 0x64200000-0x643fffff 64bit pref]
pci 0000:06:04.0: BAR 9: assigned [mem 0x60000000-0x63ffffff pref]
pci 0000:06:04.0: BAR 10: assigned [mem 0x68000000-0x6bffffff]
pci 0000:06:04.0: BAR 0: assigned [mem 0xd0012000-0xd0012fff]
pci 0000:06:04.0: BAR 0: set to [mem 0xd0012000-0xd0012fff] (PCI address [0xd0012000-0xd0012fff])
pci 0000:06:04.0: BAR 7: assigned [io 0x2000-0x20ff]
pci 0000:06:04.0: BAR 8: assigned [io 0x2400-0x24ff]
pci 0000:06:04.4: BAR 0: assigned [mem 0xd0013100-0xd00131ff]
pci 0000:06:04.4: BAR 0: set to [mem 0xd0013100-0xd00131ff] (PCI address [0xd0013100-0xd00131ff])
pci 0000:06:04.0: CardBus bridge to [bus 07-0a]
pci 0000:06:04.0: bridge window [io 0x2000-0x20ff]
pci 0000:06:04.0: bridge window [io 0x2400-0x24ff]
pci 0000:06:04.0: bridge window [mem 0x60000000-0x63ffffff pref]
pci 0000:06:04.0: bridge window [mem 0x68000000-0x6bffffff]
pci 0000:00:1e.0: PCI bridge to [bus 06-07]
pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:1e.0: bridge window [mem 0x60000000-0x63ffffff pref]
pci 0000:00:1c.0: enabling device (0100 -> 0103)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:1c.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6
pci 0000:00:1c.1: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
pci 0000:00:1c.2: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: enabling device (0004 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:06:04.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x60000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:02: resource 1 [mem 0x64c00000-0x64dfffff]
pci_bus 0000:02: resource 2 [mem 0x64e00000-0x64ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:03: resource 1 [mem 0x64800000-0x649fffff]
pci_bus 0000:03: resource 2 [mem 0x64a00000-0x64bfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0x64400000-0x645fffff]
pci_bus 0000:04: resource 2 [mem 0x64600000-0x647fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0x64000000-0x641fffff]
pci_bus 0000:05: resource 2 [mem 0x64200000-0x643fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xd0000000-0xd00fffff]
pci_bus 0000:06: resource 2 [mem 0x60000000-0x63ffffff pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:06: resource 11 [mem 0x60000000-0xfebfffff]
pci_bus 0000:07: resource 0 [io 0x2000-0x20ff]
pci_bus 0000:07: resource 1 [io 0x2400-0x24ff]
pci_bus 0000:07: resource 2 [mem 0x60000000-0x63ffffff pref]
pci_bus 0000:07: resource 3 [mem 0x68000000-0x6bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
NET: Registered protocol family 1
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Btrfs loaded
msgmni has been set to 1734
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.3: setting latency timer to 64
intel_idle: MWAIT substates: 0x1110
intel_idle: does not run on family 6 model 14
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (51 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (51 C)
ERST: Table is not found!
ioatdma: Intel(R) QuickData Technology Driver 4.00
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
intel_rng: FWH not detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6
i915 0000:00:02.0: setting latency timer to 64
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: BAR 6: can't assign [??? 0x00000000 flags 0x0] (bogus alignment)
[drm] failed to find VBIOS tables
[drm] initialized overlay support
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
brd: module loaded
loop: module loaded
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
b44 0000:06:01.0: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
b44 0000:06:01.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
b44 0000:06:01.0: setting latency timer to 64
ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0
b44: b44.c:v2.0
b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:b3:56:cd
usbcore: registered new interface driver rtl8192cu
I2O subsystem v1.325
i2o: max drivers = 8
yenta_cardbus 0000:06:04.0: CardBus bridge found [1025:0090]
yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:06:04.0: TI: mfunc 0x90501212, devctl 0x44
ata1.00: ATA-8: RIDATA NSSD, 080826, max UDMA/100
ata1.00: 62521344 sectors, multi 0: LBA
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PP02, max UDMA/33
ata1.00: configured for UDMA/100
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA RIDATA NSSD 0808 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PP02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x00b8, PCI irq 6
ata1.00: configured for UDMA/100
ata1: EH complete
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-3: new high speed USB device number 4 using ehci_hcd
scsi2 : usb-storage 1-3:1.0
scsi 2:0:0:0: Direct-Access USB Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] 4096000 512-byte logical blocks: (2.09 GB/1.95 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
usb 1-3: USB disconnect, device number 4
scsi 2:0:0:0: [sdb] Unhandled error code
scsi 2:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
scsi 2:0:0:0: [sdb] CDB: cdb[0]=0x28: 28 00 00 3e 7f 80 00 00 08 00
end_request: I/O error, dev sdb, sector 4095872
Buffer I/O error on device sdb, logical block 511984
Buffer I/O error on device sdb, logical block 511984
Buffer I/O error on device sdb, logical block 511998
Buffer I/O error on device sdb, logical block 511998
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 511999
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 1
usb 1-3: new high speed USB device number 5 using ehci_hcd
scsi3 : usb-storage 1-3:1.0
scsi 3:0:0:0: Direct-Access USB Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 4096000 512-byte logical blocks: (2.09 GB/1.95 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI removable disk
usb 1-3: USB disconnect, device number 5
sd 3:0:0:0: [sdb] Unhandled error code
sd 3:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
sd 3:0:0:0: [sdb] CDB: cdb[0]=0x28: 28 00 00 3e 7f 80 00 00 08 00
end_request: I/O error, dev sdb, sector 4095872
quiet_error: 127 callbacks suppressed
Buffer I/O error on device sdb, logical block 511984
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 16
Buffer I/O error on device sdb, logical block 16
Buffer I/O error on device sdb, logical block 16
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 16
Buffer I/O error on device sdb, logical block 8
Buffer I/O error on device sdb, logical block 8
usb 1-3: new high speed USB device number 6 using ehci_hcd
scsi4 : usb-storage 1-3:1.0
scsi 4:0:0:0: Direct-Access USB Mass Storage Device PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdb] 4096000 512-byte logical blocks: (2.09 GB/1.95 GiB)
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usb 1-3: USB disconnect, device number 6
scsi 4:0:0:0: [sdb] Unhandled error code
scsi 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
scsi 4:0:0:0: [sdb] CDB: cdb[0]=0x28: 28 00 00 3e 7f 80 00 00 08 00
end_request: I/O error, dev sdb, sector 4095872
quiet_error: 64 callbacks suppressed
Buffer I/O error on device sdb, logical block 511984
BUG: unable to handle kernel paging request at 2d312f31
IP: [<2d312f31>] 0x2d312f30
*pde = 00000000
Oops: 0000 [#1] PREEMPT
Modules linked in: netconsole coretemp bridge ipv6 stp llc bnep bluetooth dm_mod usbhid snd_hda_codec_realtek snd_hda_intel snd_hda_codec ath5k gspca_m5602 iTCO_wdt iTCO_vendor_support snd_pcm snd_timer snd acer_wmi sparse_keymap gspca_main videodev sdhci_pci pcspkr uhci_hcd sdhci ath tpm_tis tpm serio_raw joydev snd_page_alloc i2c_i801 tpm_bios wmi container [last unloaded: netconsole]

Pid: 3, comm: ksoftirqd/0 Not tainted 3.0.4-debug #3
EIP: 0060:[<2d312f31>] EFLAGS: 00010002 CPU: 0
EIP is at 0x2d312f31
EAX: f67c2360 EBX: f58f3ba0 ECX: 2d312f31 EDX: f677fb60
ESI: f677fb60 EDI: 00000000 EBP: f643be44 ESP: f643be3c
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process ksoftirqd/0 (pid: 3, ti=f643a000 task=f64346e0 task.ti=f643a000)
Stack:
c030997c f67c2360 f643be58 c030b521 f677fb60 f5a9d43c 00000000 f643be88
c030b731 00000000 00000d24 f677fb60 fffffffb f643be78 c03b9264 fffffffb
fffffffb 00000246 f677fb60 f643bea0 c030c5be 00000000 f677fb60 fffffffb
Call Trace:
[<c030997c>] ? elv_completed_request+0x3c/0x50
[<c030b521>] __blk_put_request+0x31/0xc0
[<c030b731>] blk_finish_request+0x181/0x200
[<c03b9264>] ? add_disk_randomness+0x24/0x30
[<c030c5be>] blk_end_bidi_request+0x4e/0x80
[<c030c632>] blk_end_request+0x12/0x20
[<c030c667>] blk_end_request_err+0x27/0x50
[<c042f09e>] scsi_io_completion+0x38e/0x6a0
[<c0427252>] scsi_finish_command+0x92/0xf0
[<c042e799>] scsi_softirq_done+0x109/0x130
[<c012f517>] ? irq_exit+0x77/0x80
[<c057755a>] ? __kfree_skb+0x3a/0x90
[<c031112a>] blk_done_softirq+0x5a/0x70
[<c012f692>] __do_softirq+0x72/0x110
[<c012f7ce>] run_ksoftirqd+0x9e/0x170
[<c012f730>] ? __do_softirq+0x110/0x110
[<c01434e4>] kthread+0x74/0x80
[<c0143470>] ? flush_kthread_worker+0xb0/0xb0
[<c065c1b6>] kernel_thread_helper+0x6/0xd
Code: Bad EIP value.
EIP: [<2d312f31>] 0x2d312f31 SS:ESP 0068:f643be3c
CR2: 000000002d312f31
---[ end trace 749e430365d8f6a4 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 3, comm: ksoftirqd/0 Tainted: G D 3.0.4-debug #3
Call Trace:
[<c06594be>] panic+0x61/0x14f
[<c0105392>] oops_end+0x82/0x90
[<c011ae9e>] no_context+0xbe/0x150
[<c011afc7>] __bad_area_nosemaphore+0x97/0x130
[<c012498b>] ? default_wake_function+0xb/0x10
[<c0143a0b>] ? autoremove_wake_function+0x1b/0x40
[<c0143a79>] ? wake_bit_function+0x49/0x50
[<c011b072>] bad_area_nosemaphore+0x12/0x20
[<c011b479>] do_page_fault+0x249/0x360
[<c017e37e>] ? mempool_free_slab+0xe/0x10
[<c017e938>] ? mempool_free+0xa8/0xc0
[<c01dd1a8>] ? bio_free+0x38/0x40
[<c01dd1be>] ? bio_fs_destructor+0xe/0x10
[<c01dc31c>] ? bio_put+0x2c/0x40
[<c011b230>] ? mm_fault_error+0x130/0x130
[<c065ba20>] error_code+0x58/0x60
[<c011b230>] ? mm_fault_error+0x130/0x130
[<c030997c>] ? elv_completed_request+0x3c/0x50
[<c030b521>] __blk_put_request+0x31/0xc0
[<c030b731>] blk_finish_request+0x181/0x200
[<c03b9264>] ? add_disk_randomness+0x24/0x30
[<c030c5be>] blk_end_bidi_request+0x4e/0x80
[<c030c632>] blk_end_request+0x12/0x20
[<c030c667>] blk_end_request_err+0x27/0x50
[<c042f09e>] scsi_io_completion+0x38e/0x6a0
[<c0427252>] scsi_finish_command+0x92/0xf0
[<c042e799>] scsi_softirq_done+0x109/0x130
[<c012f517>] ? irq_exit+0x77/0x80
[<c057755a>] ? __kfree_skb+0x3a/0x90
[<c031112a>] blk_done_softirq+0x5a/0x70
[<c012f692>] __do_softirq+0x72/0x110
[<c012f7ce>] run_ksoftirqd+0x9e/0x170
[<c012f730>] ? __do_softirq+0x110/0x110
[<c01434e4>] kthread+0x74/0x80
[<c0143470>] ? flush_kthread_worker+0xb0/0xb0
[<c065c1b6>] kernel_thread_helper+0x6/0xd
panic occurred, switching back to text console