Re: [PATCH 07/10] spi, serial: move to dma_transfer_direction

From: Vinod Koul
Date: Sun Oct 16 2011 - 04:10:06 EST


On Sat, 2011-10-15 at 22:00 +0300, Mika Westerberg wrote:
> On Fri, Oct 14, 2011 at 11:08:22AM +0530, Vinod Koul wrote:
>
> > diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
> > index 1cf6454..8754a39 100644
> > --- a/drivers/spi/spi-ep93xx.c
> > +++ b/drivers/spi/spi-ep93xx.c
> > @@ -550,6 +550,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
> > struct dma_async_tx_descriptor *txd;
> > enum dma_slave_buswidth buswidth;
> > struct dma_slave_config conf;
> > + enum dma_transfer_direction slave_dirn;
> > struct scatterlist *sg;
> > struct sg_table *sgt;
> > struct dma_chan *chan;
> > @@ -572,6 +573,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
> >
> > conf.src_addr = espi->sspdr_phys;
> > conf.src_addr_width = buswidth;
> > + slave_dirn = DEV_TO_MEM;
> > } else {
> > chan = espi->dma_tx;
> > buf = t->tx_buf;
> > @@ -579,6 +581,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
> >
> > conf.dst_addr = espi->sspdr_phys;
> > conf.dst_addr_width = buswidth;
> > + slave_dirn = MEM_TO_DEV;
> > }
> >
> > ret = dmaengine_slave_config(chan, &conf);
> > @@ -630,7 +633,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
> > return ERR_PTR(-ENOMEM);
> >
> > txd = chan->device->device_prep_slave_sg(chan, sgt->sgl, nents,
> > - dir, DMA_CTRL_ACK);
> > + slave_dirn, DMA_CTRL_ACK);
> > if (!txd) {
> > dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir);
> > return ERR_PTR(-ENOMEM);
>
> Can you also change the ep93xx_spi_setup_dma() function to use these new
> values? Like the patch below.
>
> Otherwise,
>
> Acked-by: Mika Westerberg <mika.westerberg@xxxxxx>
Thanks, I will add the below patche as well.

>
> diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
> index 66c3d9b..d97583f 100644
> --- a/drivers/spi/spi-ep93xx.c
> +++ b/drivers/spi/spi-ep93xx.c
> @@ -982,7 +982,7 @@ static int ep93xx_spi_setup_dma(struct ep93xx_spi *espi)
> dma_cap_set(DMA_SLAVE, mask);
>
> espi->dma_rx_data.port = EP93XX_DMA_SSP;
> - espi->dma_rx_data.direction = DMA_FROM_DEVICE;
> + espi->dma_rx_data.direction = DEV_TO_MEM;
> espi->dma_rx_data.name = "ep93xx-spi-rx";
>
> espi->dma_rx = dma_request_channel(mask, ep93xx_spi_dma_filter,
> @@ -993,7 +993,7 @@ static int ep93xx_spi_setup_dma(struct ep93xx_spi *espi)
> }
>
> espi->dma_tx_data.port = EP93XX_DMA_SSP;
> - espi->dma_tx_data.direction = DMA_TO_DEVICE;
> + espi->dma_tx_data.direction = MEM_TO_DEV;
> espi->dma_tx_data.name = "ep93xx-spi-tx";
>
> espi->dma_tx = dma_request_channel(mask, ep93xx_spi_dma_filter,


--
~Vinod

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/