Re: [PATCH 2/5 v11] arm: omap: usb: ehci and ohci hwmod structuresfor omap3

[Munegowda, Keshava]

On Fri, Sep 30, 2011 at 2:02 PM, Paul Walmsley <paul@xxxxxxxxx> wrote:
> On Wed, 28 Sep 2011, Munegowda, Keshava wrote:
>
>> Thanks paul,
>>
>> But In USB Host case, there is a challenge!
>>
>> I need both usbhost_48m_fck and usbhost_120m_fck to be turned on when
>> I invoke pm_runtime_get_sync ; so there are couple of options to do this
>>
>> 1. use clk_get with hard coded  usbhost_120m_fck name in  usbhs driver
>>        enable this clock after invoking pm_runtime_get_sync
>>
>> 2. add an additional flag in hwmod ; so that pm_runtime_get_sync will enable
>>            main clock as well as optional clocks
>>
>> please comment on these two approaches..
>
> Looks like you picked approach #1 which is fine with me.
>
> Here's what I don't understand about how this clock is used, though.
> According to the 34xx TRM vZR Section 24.2.3.1.2 "High-Speed USB Host
> Subsystem Clocks", this is only used to "clock EHCI controller internal
> logic".  So if EHCI is not being used, it would seem to me that this clock
> shouldn't be enabled?  But patch #5 seems to enable and disable it
> unconditionally.  Am I missing something here?

OK. are you suggesting that this clock should be enabled/disabled; only
if atleast one port is selected for ehci?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/