[195/244] [SCSI] lpfc 8.3.25: Miscellaneous Bug fixes and code cleanup

From: Greg KH
Date: Wed Sep 28 2011 - 18:57:24 EST

3.0-stable review patch. If anyone has any objections, please let us know.

------------------

From: James Smart <james.smart@xxxxxxxxxx>

commit 88a2cfbb8bf3802ca5a90c7d1567a1e542e6ef0c upstream.

Miscellaneous Bug fixes and code cleanup

- Fix 16G link speed reporting by adding check for 16G check.
- Change the check and enforcement of MAILBOX_EXT_SIZE (2048B)
to the check and enforcement of BSG_MBOX_SIZE - sizeof(MAILBOX_t) (3840B).
- Instead of waiting for a fixed amount of time after performing firmware
reset, the driver shall wait for the Lancer SLIPORT_STATUS register for the
readiness of the firmware for bring up.
- Add logging to indicate when dynamic parameters are changed.
- Add revision and date to the firmware image format.
- Use revision instead of rev_name to check firmware image version.
- Update temporary offset after memcopy is complete for firmware update.
- Consolidated the use of the macros to get rid of duplicated register
offset definitions.
- Removed the unused second parameter in routine lpfc_bsg_diag_mode_enter()
- Enable debugfs when debugfs is enabled.
- Update function comments for lpfc_sli4_alloc_xri and lpfc_sli4_init_rpi_hdrs.

Signed-off-by: Alex Iannicelli <alex.iannicelli@xxxxxxxxxx>
Signed-off-by: James Smart <james.smart@xxxxxxxxxx>
Signed-off-by: James Bottomley <JBottomley@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
drivers/scsi/lpfc/lpfc.h | 5 +++
drivers/scsi/lpfc/lpfc_attr.c | 67 +++++++++++++++++++++++++++++++++++++++++-
drivers/scsi/lpfc/lpfc_bsg.c | 37 +++++++++++++----------
drivers/scsi/lpfc/lpfc_hw4.h | 21 +++++--------
drivers/scsi/lpfc/lpfc_init.c | 34 +++++++++++----------
drivers/scsi/lpfc/lpfc_sli.c | 17 +++++-----
drivers/scsi/lpfc/lpfc_sli4.h | 2 +
7 files changed, 129 insertions(+), 54 deletions(-)

--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -20,6 +20,11 @@
*******************************************************************/

#include <scsi/scsi_host.h>
+
+#if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_SCSI_LPFC_DEBUG_FS)
+#define CONFIG_SCSI_LPFC_DEBUG_FS
+#endif
+
struct lpfc_sli2_slim;

#define LPFC_PCI_DEV_LP 0x1
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -755,6 +755,47 @@ lpfc_issue_reset(struct device *dev, str
}

/**
+ * lpfc_sli4_pdev_status_reg_wait - Wait for pdev status register for readyness
+ * @phba: lpfc_hba pointer.
+ *
+ * Description:
+ * SLI4 interface type-2 device to wait on the sliport status register for
+ * the readyness after performing a firmware reset.
+ *
+ * Returns:
+ * zero for success
+ **/
+static int
+lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba)
+{
+ struct lpfc_register portstat_reg;
+ int i;
+
+
+ lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
+ &portstat_reg.word0);
+
+ /* wait for the SLI port firmware ready after firmware reset */
+ for (i = 0; i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT; i++) {
+ msleep(10);
+ lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
+ &portstat_reg.word0);
+ if (!bf_get(lpfc_sliport_status_err, &portstat_reg))
+ continue;
+ if (!bf_get(lpfc_sliport_status_rn, &portstat_reg))
+ continue;
+ if (!bf_get(lpfc_sliport_status_rdy, &portstat_reg))
+ continue;
+ break;
+ }
+
+ if (i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT)
+ return 0;
+ else
+ return -EIO;
+}
+
+/**
* lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc
* @phba: lpfc_hba pointer.
*
@@ -805,7 +846,10 @@ lpfc_sli4_pdev_reg_request(struct lpfc_h
readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET);

/* delay driver action following IF_TYPE_2 reset */
- msleep(100);
+ rc = lpfc_sli4_pdev_status_reg_wait(phba);
+
+ if (rc)
+ return -EIO;

init_completion(&online_compl);
rc = lpfc_workq_post_event(phba, &status, &online_compl,
@@ -895,6 +939,10 @@ lpfc_board_mode_store(struct device *dev

if (!phba->cfg_enable_hba_reset)
return -EACCES;
+
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "3050 lpfc_board_mode set to %s\n", buf);
+
init_completion(&online_compl);

if(strncmp(buf, "online", sizeof("online") - 1) == 0) {
@@ -1290,6 +1338,10 @@ lpfc_poll_store(struct device *dev, stru
if (phba->sli_rev == LPFC_SLI_REV4)
val = 0;

+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "3051 lpfc_poll changed from %d to %d\n",
+ phba->cfg_poll, val);
+
spin_lock_irq(&phba->hbalock);

old_val = phba->cfg_poll;
@@ -1605,6 +1657,9 @@ static int \
lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \
{ \
if (val >= minval && val <= maxval) {\
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
+ "3052 lpfc_" #attr " changed from %d to %d\n", \
+ phba->cfg_##attr, val); \
phba->cfg_##attr = val;\
return 0;\
}\
@@ -1762,6 +1817,9 @@ static int \
lpfc_##attr##_set(struct lpfc_vport *vport, uint val) \
{ \
if (val >= minval && val <= maxval) {\
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \
+ "3053 lpfc_" #attr " changed from %d to %d\n", \
+ vport->cfg_##attr, val); \
vport->cfg_##attr = val;\
return 0;\
}\
@@ -2678,6 +2736,9 @@ lpfc_topology_store(struct device *dev,
if (nolip)
return strlen(buf);

+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "3054 lpfc_topology changed from %d to %d\n",
+ prev_val, val);
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
if (err) {
phba->cfg_topology = prev_val;
@@ -3101,6 +3162,10 @@ lpfc_link_speed_store(struct device *dev
if (sscanf(val_buf, "%i", &val) != 1)
return -EINVAL;

+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "3055 lpfc_link_speed changed from %d to %d %s\n",
+ phba->cfg_link_speed, val, nolip ? "(nolip)" : "(lip)");
+
if (((val == LPFC_USER_LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
((val == LPFC_USER_LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
((val == LPFC_USER_LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1471,13 +1471,12 @@ send_mgmt_rsp_exit:
/**
* lpfc_bsg_diag_mode_enter - process preparing into device diag loopback mode
* @phba: Pointer to HBA context object.
- * @job: LPFC_BSG_VENDOR_DIAG_MODE
*
* This function is responsible for preparing driver for diag loopback
* on device.
*/
static int
-lpfc_bsg_diag_mode_enter(struct lpfc_hba *phba, struct fc_bsg_job *job)
+lpfc_bsg_diag_mode_enter(struct lpfc_hba *phba)
{
struct lpfc_vport **vports;
struct Scsi_Host *shost;
@@ -1521,7 +1520,6 @@ lpfc_bsg_diag_mode_enter(struct lpfc_hba
/**
* lpfc_bsg_diag_mode_exit - exit process from device diag loopback mode
* @phba: Pointer to HBA context object.
- * @job: LPFC_BSG_VENDOR_DIAG_MODE
*
* This function is responsible for driver exit processing of setting up
* diag loopback mode on device.
@@ -1586,7 +1584,7 @@ lpfc_sli3_bsg_diag_loopback_mode(struct
goto job_error;
}

- rc = lpfc_bsg_diag_mode_enter(phba, job);
+ rc = lpfc_bsg_diag_mode_enter(phba);
if (rc)
goto job_error;

@@ -1758,7 +1756,7 @@ lpfc_sli4_bsg_diag_loopback_mode(struct
goto job_error;
}

- rc = lpfc_bsg_diag_mode_enter(phba, job);
+ rc = lpfc_bsg_diag_mode_enter(phba);
if (rc)
goto job_error;

@@ -1982,7 +1980,7 @@ lpfc_sli4_bsg_link_diag_test(struct fc_b
goto job_error;
}

- rc = lpfc_bsg_diag_mode_enter(phba, job);
+ rc = lpfc_bsg_diag_mode_enter(phba);
if (rc)
goto job_error;

@@ -3511,7 +3509,7 @@ lpfc_bsg_sli_cfg_read_cmd_ext(struct lpf
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
"2947 Issued SLI_CONFIG ext-buffer "
"maibox command, rc:x%x\n", rc);
- return 1;
+ return SLI_CONFIG_HANDLED;
}
lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
"2948 Failed to issue SLI_CONFIG ext-buffer "
@@ -3549,7 +3547,7 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lp
LPFC_MBOXQ_t *pmboxq = NULL;
MAILBOX_t *pmb;
uint8_t *mbx;
- int rc = 0, i;
+ int rc = SLI_CONFIG_NOT_HANDLED, i;

mbox_req =
(struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd;
@@ -3660,7 +3658,7 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lp
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
"2955 Issued SLI_CONFIG ext-buffer "
"maibox command, rc:x%x\n", rc);
- return 1;
+ return SLI_CONFIG_HANDLED;
}
lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
"2956 Failed to issue SLI_CONFIG ext-buffer "
@@ -3668,6 +3666,11 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lp
rc = -EPIPE;
}

+ /* wait for additoinal external buffers */
+ job->reply->result = 0;
+ job->job_done(job);
+ return SLI_CONFIG_HANDLED;
+
job_error:
if (pmboxq)
mempool_free(pmboxq, phba->mbox_mem_pool);
@@ -3959,7 +3962,7 @@ lpfc_bsg_write_ebuf_set(struct lpfc_hba
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
"2969 Issued SLI_CONFIG ext-buffer "
"maibox command, rc:x%x\n", rc);
- return 1;
+ return SLI_CONFIG_HANDLED;
}
lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
"2970 Failed to issue SLI_CONFIG ext-buffer "
@@ -4039,14 +4042,14 @@ lpfc_bsg_handle_sli_cfg_ext(struct lpfc_
struct lpfc_dmabuf *dmabuf)
{
struct dfc_mbox_req *mbox_req;
- int rc;
+ int rc = SLI_CONFIG_NOT_HANDLED;

mbox_req =
(struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd;

/* mbox command with/without single external buffer */
if (mbox_req->extMboxTag == 0 && mbox_req->extSeqNum == 0)
- return SLI_CONFIG_NOT_HANDLED;
+ return rc;

/* mbox command and first external buffer */
if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_IDLE) {
@@ -4249,7 +4252,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
* mailbox extension size
*/
if ((transmit_length > receive_length) ||
- (transmit_length > MAILBOX_EXT_SIZE)) {
+ (transmit_length > BSG_MBOX_SIZE - sizeof(MAILBOX_t))) {
rc = -ERANGE;
goto job_done;
}
@@ -4272,7 +4275,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
/* receive length cannot be greater than mailbox
* extension size
*/
- if (receive_length > MAILBOX_EXT_SIZE) {
+ if (receive_length > BSG_MBOX_SIZE - sizeof(MAILBOX_t)) {
rc = -ERANGE;
goto job_done;
}
@@ -4306,7 +4309,8 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
bde = (struct ulp_bde64 *)&pmb->un.varWords[4];

/* bde size cannot be greater than mailbox ext size */
- if (bde->tus.f.bdeSize > MAILBOX_EXT_SIZE) {
+ if (bde->tus.f.bdeSize >
+ BSG_MBOX_SIZE - sizeof(MAILBOX_t)) {
rc = -ERANGE;
goto job_done;
}
@@ -4332,7 +4336,8 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phb
* mailbox extension size
*/
if ((receive_length == 0) ||
- (receive_length > MAILBOX_EXT_SIZE)) {
+ (receive_length >
+ BSG_MBOX_SIZE - sizeof(MAILBOX_t))) {
rc = -ERANGE;
goto job_done;
}
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -170,15 +170,8 @@ struct lpfc_sli_intf {
#define LPFC_PCI_FUNC3 3
#define LPFC_PCI_FUNC4 4

-/* SLI4 interface type-2 control register offsets */
-#define LPFC_CTL_PORT_SEM_OFFSET 0x400
-#define LPFC_CTL_PORT_STA_OFFSET 0x404
-#define LPFC_CTL_PORT_CTL_OFFSET 0x408
-#define LPFC_CTL_PORT_ER1_OFFSET 0x40C
-#define LPFC_CTL_PORT_ER2_OFFSET 0x410
+/* SLI4 interface type-2 PDEV_CTL register */
#define LPFC_CTL_PDEV_CTL_OFFSET 0x414
-
-/* Some SLI4 interface type-2 PDEV_CTL register bits */
#define LPFC_CTL_PDEV_CTL_DRST 0x00000001
#define LPFC_CTL_PDEV_CTL_FRST 0x00000002
#define LPFC_CTL_PDEV_CTL_DD 0x00000004
@@ -515,7 +508,7 @@ struct lpfc_register {
/* The following BAR0 register sets are defined for if_type 0 and 2 UCNAs. */
#define LPFC_SLI_INTF 0x0058

-#define LPFC_SLIPORT_IF2_SMPHR 0x0400
+#define LPFC_CTL_PORT_SEM_OFFSET 0x400
#define lpfc_port_smphr_perr_SHIFT 31
#define lpfc_port_smphr_perr_MASK 0x1
#define lpfc_port_smphr_perr_WORD word0
@@ -575,7 +568,7 @@ struct lpfc_register {
#define LPFC_POST_STAGE_PORT_READY 0xC000
#define LPFC_POST_STAGE_PORT_UE 0xF000

-#define LPFC_SLIPORT_STATUS 0x0404
+#define LPFC_CTL_PORT_STA_OFFSET 0x404
#define lpfc_sliport_status_err_SHIFT 31
#define lpfc_sliport_status_err_MASK 0x1
#define lpfc_sliport_status_err_WORD word0
@@ -593,7 +586,7 @@ struct lpfc_register {
#define lpfc_sliport_status_rdy_WORD word0
#define MAX_IF_TYPE_2_RESETS 1000

-#define LPFC_SLIPORT_CNTRL 0x0408
+#define LPFC_CTL_PORT_CTL_OFFSET 0x408
#define lpfc_sliport_ctrl_end_SHIFT 30
#define lpfc_sliport_ctrl_end_MASK 0x1
#define lpfc_sliport_ctrl_end_WORD word0
@@ -604,8 +597,8 @@ struct lpfc_register {
#define lpfc_sliport_ctrl_ip_WORD word0
#define LPFC_SLIPORT_INIT_PORT 1

-#define LPFC_SLIPORT_ERR_1 0x040C
-#define LPFC_SLIPORT_ERR_2 0x0410
+#define LPFC_CTL_PORT_ER1_OFFSET 0x40C
+#define LPFC_CTL_PORT_ER2_OFFSET 0x410

/* The following Registers apply to SLI4 if_type 0 UCNAs. They typically
* reside in BAR 2.
@@ -3198,6 +3191,8 @@ struct lpfc_grp_hdr {
#define lpfc_grp_hdr_id_MASK 0x000000FF
#define lpfc_grp_hdr_id_WORD word2
uint8_t rev_name[128];
+ uint8_t date[12];
+ uint8_t revision[32];
};

#define FCP_COMMAND 0x0
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2927,6 +2927,8 @@ void lpfc_host_attrib_init(struct Scsi_H
sizeof fc_host_symbolic_name(shost));

fc_host_supported_speeds(shost) = 0;
+ if (phba->lmt & LMT_16Gb)
+ fc_host_supported_speeds(shost) |= FC_PORTSPEED_16GBIT;
if (phba->lmt & LMT_10Gb)
fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
if (phba->lmt & LMT_8Gb)
@@ -4966,17 +4968,14 @@ out_free_mem:
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to post rpi header templates to the
- * HBA consistent with the SLI-4 interface spec. This routine
+ * port for those SLI4 ports that do not support extents. This routine
* posts a PAGE_SIZE memory region to the port to hold up to
- * PAGE_SIZE modulo 64 rpi context headers.
- * No locks are held here because this is an initialization routine
- * called only from probe or lpfc_online when interrupts are not
- * enabled and the driver is reinitializing the device.
+ * PAGE_SIZE modulo 64 rpi context headers. This is an initialization routine
+ * and should be called only when interrupts are disabled.
*
* Return codes
* 0 - successful
- * -ENOMEM - No available memory
- * -EIO - The mailbox failed to complete successfully.
+ * -ERROR - otherwise.
**/
int
lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
@@ -5687,17 +5686,22 @@ lpfc_sli4_bar0_register_memmap(struct lp
break;
case LPFC_SLI_INTF_IF_TYPE_2:
phba->sli4_hba.u.if_type2.ERR1regaddr =
- phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_ERR_1;
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_ER1_OFFSET;
phba->sli4_hba.u.if_type2.ERR2regaddr =
- phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_ERR_2;
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_ER2_OFFSET;
phba->sli4_hba.u.if_type2.CTRLregaddr =
- phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_CNTRL;
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_CTL_OFFSET;
phba->sli4_hba.u.if_type2.STATUSregaddr =
- phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_STATUS;
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_STA_OFFSET;
phba->sli4_hba.SLIINTFregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF;
phba->sli4_hba.PSMPHRregaddr =
- phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_IF2_SMPHR;
+ phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_CTL_PORT_SEM_OFFSET;
phba->sli4_hba.RQDBregaddr =
phba->sli4_hba.conf_regs_memmap_p + LPFC_RQ_DOORBELL;
phba->sli4_hba.WQDBregaddr =
@@ -8859,11 +8863,11 @@ lpfc_write_firmware(struct lpfc_hba *phb
return -EINVAL;
}
lpfc_decode_firmware_rev(phba, fwrev, 1);
- if (strncmp(fwrev, image->rev_name, strnlen(fwrev, 16))) {
+ if (strncmp(fwrev, image->revision, strnlen(image->revision, 16))) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3023 Updating Firmware. Current Version:%s "
"New Version:%s\n",
- fwrev, image->rev_name);
+ fwrev, image->revision);
for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) {
dmabuf = kzalloc(sizeof(struct lpfc_dmabuf),
GFP_KERNEL);
@@ -8892,9 +8896,9 @@ lpfc_write_firmware(struct lpfc_hba *phb
fw->size - offset);
break;
}
- temp_offset += SLI4_PAGE_SIZE;
memcpy(dmabuf->virt, fw->data + temp_offset,
SLI4_PAGE_SIZE);
+ temp_offset += SLI4_PAGE_SIZE;
}
rc = lpfc_wr_object(phba, &dma_buffer_list,
(fw->size - offset), &offset);
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -12345,19 +12345,18 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba
}

/**
- * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
+ * lpfc_sli4_alloc_xri - Get an available rpi in the device's range
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to post rpi header templates to the
- * port for those SLI4 ports that do not support extents. This routine
- * posts a PAGE_SIZE memory region to the port to hold up to
- * PAGE_SIZE modulo 64 rpi context headers. This is an initialization routine
- * and should be called only when interrupts are disabled.
+ * HBA consistent with the SLI-4 interface spec. This routine
+ * posts a SLI4_PAGE_SIZE memory region to the port to hold up to
+ * SLI4_PAGE_SIZE modulo 64 rpi context headers.
*
- * Return codes
- * 0 - successful
- * -ERROR - otherwise.
- */
+ * Returns
+ * A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful
+ * LPFC_RPI_ALLOC_ERROR if no rpis are available.
+ **/
uint16_t
lpfc_sli4_alloc_xri(struct lpfc_hba *phba)
{
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -81,6 +81,8 @@
(fc_hdr)->fh_f_ctl[1] << 8 | \
(fc_hdr)->fh_f_ctl[2])

+#define LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT 12000
+
enum lpfc_sli4_queue_type {
LPFC_EQ,
LPFC_GCQ,


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/